HP G71-340us: my laptop monitor G71-340us

Similar Questions

• Satellite Pro A300 - USB laptop monitor noise

  Hi all

  Had a problem every time I got back the lid of the laptop a bit beyond the vertical position - he makes her a USB device makes when it is plugged in.

  He can not understand why, but started the device built-in photo and with now I pushed the laptop monitor slightly and the camera exploded... Any ideas?

  Its still under warranty.

  Thanks in advance

  I agree with Akuma.
  Satellite Pro A300 is the new laptop model and you should do is contact the service and let check what the problem is here.

• Resolution with HP2311x and HP ProBook6455b series laptop monitor configuration problem

  Hello

  I have a problem-solving with portable HP2311x and ProBook6455b.

  Maximum resolution is 1024 x 768

  Current display driver is ATI Mobility Radeon HD 4200

  However, my HP monitor supports the 1920 X 1080.

  I used only the external monitor without using the laptop monitor and the maximum resolution is always 1024 x 768.

  I also downloaded the drivers recommended by HP, but it does not solve the issue.

  I also tried with the drivers provided by AMD, but I get still more low resolution (1280 x 768) because the driver software detects is ATI Mobility Radeon HD 4250

  When I try to use the AMD Vision Engine Control Center stops unexpectedly

  I have conteacted
  Portrait Displays, Inc..
  http://support.portrait.com

  But they suggested me to contact HP because they were not able to solve my problem.

  Any help will be appreciated.

  Kind regards.

  1. number and product name
  • HP ProBook 6455 b and HP 2311 x

  2 operating system installed (if applicable)
  • Windows 7 64 bit

  3. error message (if any)
  • No error message

  4. all changes made to your system until the problem occurred
  • No change

  Hello antgfig,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• My computer laptop monitor works, but does not have the windows desktop.

  original title: my laptop monitor works, but the windows on desktop are not displayed. The desktop appear correctly in safe mode but not in normal mode. Any suggestions?

  Running windows XP media center edition on an HP laptop. AMD Turion 64-bit dual core.

  Hi Prohoss,

  Follow the steps in this document to perform a System Restore. You will need to start safe mode to perform the steps.

• When I disconnect the monitor Samsung, laptop monitor loses the office.

  I use a laptop Toshiba Satellite L645-S4102.  I have been using an external Samsung monitor for a while.  I need to use the laptop for a presentation only.

  I can change to the screen of the laptop or use the Samsung monitor and the laptop monitor as long as my computer is connected to the Samsung monitor.

  But, when I disconnect the monitor Samsung, laptop monitor loses the shortcuts on the desktop and the taskbar and shows only the background.  I tried to restart the computer, but the same thing happens.  As soon as I reconnect the Samsung screen, everything happens very well again.  Ideas please.

  Start with the extra monitor connected and used.  Then go to your desktop and follow the instructions below:

  1. Click background, choose the resolution of the screen.
  2. In the graph at the top, click on your laptop screen (if you don't know who is who, click "Identify" and click the monitor displays on the screen of the laptop).
  3. Check the box "use as primary monitor" and then apply the change.

  The bar of tasks and other items still show on the main monitor, so this will ensure that your laptop screen is considered to be the main.

  If necessary (unlikely but it could happen), repeat these 3 steps again when the additional monitor is disconnected.

• The laptop monitor goes black after the external vga connection screen

  Hey,.

  I have a Qosmio G50 - 10H, Windows 7 32-bit. After connecting to an external monitor, the internal laptop display becomes almost black. It is possible to see some items on the screen, but it is dark gray to work on. It does not much adjustment of color or brightness (black to very dark grey). The main problem is when disconnecting the external monitor monitor internal still is dark gray and still does not have many adjustments. It's so dark on the adjustments of brigthest that it is impossible to work. I downloaded the latest version of the driver for the support, but still the same problem.

  Any suggestions?

  It is somewhat strange.
  You can switch between LCD and external monitor by using the FN + F5 key combination?
  If you can switch to the LCD only again everything OK?

• HP Envy laptop: monitor external (2nd) lost after BIOS update

  Hello.

  This is the 2nd time this has happened. Once, an online agent was able to solve the problem. I recently did an update of the BIOS and after the update, my laptop is not detecting my 2nd external monitor. I tried to manually edit the graphics card but nothing works. Any ideas?

  Thanks for the reply.

  I have the problem of the manual recovery of the BIOS.

  http://support.HP.com/us-en/document/c02693833

• What should I do if my computer laptop monitor flickers to the point I can't see?

  I have a Toshiba Windows vista computer laptop purchased new in 2008, flickers to the point were I do not see what I do, I use a new external monitor right know and (external monitor) works very well.  Here are three videos I took on YouTube http://youtu.be/Iw02nQv2Yqg , http://, http://youtu.be/QJTmH7YdibM and http://www.youtube.com/watch?v=sMT3iFBHZ6g&feature=youtu.be .

  PS: I am also under UBUntu

  Hello

  You can try to download and install the latest drivers from site Web from Toshiba and check.
   http://www.Toshiba.com
   
  If this does not work, you can contact Toshiba Support for strengthening with the hardware on your computer.
  http://www.Toshiba.com/Tai/support.jsp

• Dims laptop monitor by itself

  Hello

  I have a laptop HP ENVY m6 and I've recently updated to windows 8.1 and noticed a problem. My laptop screen fades to himself and becomes a sortof bright / not so beautiful in color. The window border becomes more bright and gross to research as well. When I open the notebook in a maximized window, the colors of the window border and everything becomes more enjoyable and better color quality until I have play it down and go to the desktop or another program. It is really annoying and makes the game of games on my pc not so pleasant.

  Reality: I didn't belive it's a graphics card problem. I have a second monitor hooked up to the color and the laptop runs very well on it.

  Its not noticeable to screenshots of office or records. Just my opinion on the outside.

  I hope someone can help!

  Fixed, after doing some research more that I fixed it

• Cannot adjust the brightness of the laptop monitor

  I'm not sure when this problem started, but I'm guessing it's when I've updated my graphics driver (Nvidia) or software of the chipset (Intel).

  After a while, I noticed that my brightness keyboard shortcuts were not working, but other hotkeys (touchpad, volume, sleep, wi - fi, bluetooth, etc.) were still working.

  Since I use my laptop for most on my desk with the max brightness settings, I ignored it for a while.

  When I happened to use up the outside of the battery, the monitor went automatically minimum brightness settings.

  I tried to find the brightness slider in the control panel or the mobility Center, but they have been missing.

  The options for the Adaptive brightness disappeared as well.

  Now I don't see a way to adjust the brightness of my.

  I tried a variety of suggestions available on the web, including:

  create a new user account,

  validation of account information,

  Remove and reinstall the driver for the monitor,

  search for 'brilliance' in the start menu,

  re-installation of software hotkey,

  rolling back the graphics drivers and chipset (from those provided by the manufacturer).

  I spoke with a Microsoft support for topic a couple of hours, still no luck (he was very nice anyway).

  If anyone is suggesting the control panel Windows or Nvidia color grading, I don't mean for those, since I need to adjust the brightness of the backlight of the screen, not software-ish of calibration of the colours on the screen.

  I use Windows 7 Ultimate on CLEVO M860TU with monitor Chi Mei N154Z1-L02

  I am looking for a way to restore the brightness sliders, or at least to adjust the brightness manually.

  When I had to happen, I was able to restore by doing this:

  (1) open Device Manager

  (2) right click and uninstall the monitor (not the graphics driver, but the monitor specifically)

  3) click on the "Scan for new hardware" button on the toolbar above

  (4) try to use the brightness slider functions once again (either in Center of energy or mobility settings).

  Has worked for me, I would like to know if it helps you too.

• Turn off laptop monitor. How is it reset?

  Apparently, I turned the monitor on my laptop by using the graphical controls (right click on an empty area of the windows). How can that be reset because I can't see the windows more? The sys is Win 7 and the computer is a Dell Inspiron 17R.

  Thanks for the reply.
  Earlier, I had it reset back to the last usable boot, so I don't have to try your solution.

• Add the laptop monitor

  can you add a monitor without the screen of the laptop turned on, if so, how

  Thanks rick

  Please post your complete laptop model number and operating system, as well as others can give specific instructions.

  Normally you just connect the external monitor, then go to display properties to configure how you want to use the external monitor.

  .

• HP G60 laptop - monitor goes black but power stays on

  When I press the power button, lights up the laptop, I can connect to windows, but then the screen goes black after a few minutes or as soon as possible.

  -The power stays on and does not turn off or restart

  -I can hear the fan spins again

  -I see very very very vaguely the screen that I should be seeing, but no mouse or cursor

  -J' tried to take out the battery

  Anyone know what I can do?

  Thank you, Julie

  If you can see the desktop very weakly, then I guess the backlight is dead/dying

  Edit: view, works does not for any reason any

• HP Envy laptop monitor does not light

  Just bought this HP Envy with Windows 8 just over a month ago.

  Today, after the installation of an HP recommended that Windows Update the monitor does not light.  The power led is on the internet led is activated and the CAP turns on if you press.  Still no monitor.

  Bought it at best buy and it's a drive of 1 1/2 at this store if I have to take it to Geek Squad

  If you have windows 8.1 on it then it looks like the update of kb2903939 killed. I fight with this problem since Christmas.

  Power cycle the cell several times without leaving start completely. It should bring up a screen of recovery. If you can find the path to start safe mode, you can uninstall kb2903939 and then restart. That fixed my problem.

  Otherwise, it should be a call to HP or Microsoft support.

• Pavilion 15ab165us computer laptop 15.6: How can I add an external monitor to my laptop HP Pavilion

  I have a Pavilion laptop and want to use an external monitor at home rather than on the laptop monitor.  Is it possible and I can connect it to the USB port on the laptop?

  Hey1950, welcome to the forum.

  Yes, you can use a USB port.  Here is a USB video adapter that should do what you need.  These adapters are designed for USB 2.0. but they make USB 3.0, also.  You can speak with a representative at StarTech to answer your questions about them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.