HP G72-250US screen remains black on power. hear the fans and light is on but no go

Similar Questions

• screen of Mac pro 2014 remains black when power up

  MacPro 15.4/2.2ghz/16gb/256gb 2014 flash power off all good last night.  Am it powers up but the screen remains black.  Apple on the cover of the lit even when closed.  Start button / stop it but same result when this back to the top.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the Interior

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Acer blue 720 and the fan are on but the screen remains black

  Hello

  I appreciate any help that can be provided.  I tried to remove the batter on my daughter 720 and reinsert, but this problem persists.  I can hear the fan and the blue light turns on but the screen remains black.  I tried to rest for 30 seconds and esc, refresh and power.

  Thank you

  Well, when the scrween does not at all (even in text mode which allows a recovery) then it is most often a problem with the cable bwteeen the motherboard and screen, most often following it is a failure of the screen (which requires generally a matter of co-location as cracked screen) and from time to time, it is the motherboard. Probably time to contact Acer support to see on a repair.

• Screen remains black, while all buttons are light

  original title: serious problem with my computer!

  I'm trying to fix my computer because something is obviously wrong with it and I'm not very good with computers, so I don't really know what I'm doing, and I think I might have messed up even more now.

  Recently, I tried to back up my files on my d drive but he said he couldn't because my c drive was damaged so he told me I could fix it and I tried, but he says he couldn't when it is in use and told me to program it so that he could check it out when I start then my computer. Then I restarted my computer, and every time I restart my computer, it has a problem back on. The screen remains black then that all the keys are lit and then after a minute or two, it hangs, and then she did it again and again until I have press and hold the power button to turn it off. I have to finish by wait 5 minutes before turning on so it lights correctly, otherwise it will just do that again.

  Then he started toward the top of normal, of course I know what the disk check thing looks like now because what happens now, but before it has not then I thought it did not work and as a last resort, I wanted to wipe my hard drive clean because I tried everything I could, and I don't have the money to fix right now and probably won't for a while. So I followed all the instructions for the recovery of the system and none of the other stuff worked and I decided to go with my disk wiping hard completely clean and restore factory settings. I followed all the instructions and then it turns off my computer, trying to wake it up, so his restart of course, but he does what its been recently when it restarts and crashes.

  If I turn it off and wait a few minutes, then turn it on and I was really upset at that time here because I thought that it did not work. Its starts upward and there appears the disk check thing and it says system files verification on c: responding file type is NTFS. __Cannot volume open for access.__windows live has finished check the disc. then goes to the login screen I open a session, but then the screen is black and the only thing I see is my mouse. It was like it maybe 30 minutes or more, and I didn't know what was happening so I turned off and then tried to turn it on and it does the same thing next time. I thought that maybe when he crashed he screwed up the process, or perhaps checking file system on c drive messed up. So when I had the chance, he finally started upward and I connected again but this time on the user prompted and everything was still there but it was EXTREMELY slow, as it took maybe 10 minutes or more to open what anyone and it loaded really slow when I logged in. I finally made the thing about system recovery again after a few hours of waiting so he can keep loading, cause whenever I clicked it, it does not always work. And then it's the same thing all over again. He obviously never erased from my hard drive, so I probably * my computer even more, and then it was already * upward and it was a gift, so I would really like to fix so if someone can help me maybe I would really appreciate it!

  Hi TeresaBilski,

  ·         How have you tried to reinstall the operating system?

  I suggest you erase the hard drive and do a clean reinstall of Vista. I would like to ask if you still have the boot floppies for Windows Vista that came with the computer. If this isn't the case, you will need to get a.

• Alienware x 51 starts, but the screen remains black.

  I bought my x 51 all with warranty 1 year ago a year and a half, recently it has been giving me some problems and today I can't use it yet at all.

  The problem started with my screen remains black when I turned on my computer (punt, never awake from sleep), but which would be corrected by me once or twice by restarting the computer. That did not last too long, and soon it did not matter how many times I rebooted the computer. I finally had to unplug the computer and press and hold the power for 30 seconds to see if it worked.

  He did, but this solution has worked only once, and now I have nothing seems to regularize my situation. I tried switching monitors and cables with my brother (who is an identical 51 x), but nothing has worked.

  To summarize:

  My computer turns on.

  Not funny lights or noises (save a beep on startup)

  Screen remains black on reboot of the screen it says he receives no signal and falls asleep.

  No problem when it runs normally (not funny colors, stripes on the screen or blur).

  Help, please. Dell support wants 70 to 110 dollars to listen to even my problem, which is money, that I don't have at the moment.

  Thanks for anything that might help!

  Sounds like you have a dead video card, from the link above looks like there is no output from vga Intel to tun tests, you must remove the old video card and test with another video card that works to verify that the card is in fact dead, like your brothers x 51 remove the video card and test it on your machine.

  If I had this machine in front of me I would use one of these babies for once then run tests on the video card.

  HDMI to DVI

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Windows vista screen remain black but the power and the fan runs

  I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

  Thank you
  c

  Hello

  Video card problems are the most common cause of this problem.

  Method 1:
  Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
  b. click on the processes tab, click explorer.exe and then click on end process.
  c. click file and then click New task (run).
  (d) in the text box to open, type explorer.exe, and then click OK.
  e. click the Start button, type device manager in the start search box, and then, in the search results.
  Click on Device Manager.
  f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

  Method 2:

  Start the computer in safe mode and run system restore

  a. click the Start button, click the arrow next to Shut Down and then click on restart.
  b. do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
  e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. choose a restore point when your PC worked as expected, click Next and then click Finish.
  g. restart your computer normally.

  Keep us updated on the status of the issue.

• MacBook Pro 2015 turns on but the screen remains black...

  Hello

  Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

  Could someone help me please?

  Also a few minutes ago the fan has started to make noise in the macbook...

  But the screen remains black.

  Thank you

  Shaynidw

  Hi shaynidw,

  From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

  On the screens you see when you start your Mac

  Power on

  

  When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

  White screen

  

  After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

  shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

  In addition, you can try to start your computer in safe mode to see if you get different results.

  Try safe mode if your Mac does not end commissioning

  If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

  Take care.

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too

• When I start my Equium P200D screen remains black

  Hello

  I have a portable Satellite P200D-139 (WinVista). I left on during a few hours after work a day to to this subject when I came back the screen was black, but there is no way get back on. I have turned it off manually (I know we're not really supposed to do, but I had no choice) and tried to turn it back on to the it, but there is nothing happening.

  I can hear it start about 2-5 seconds, then it's as if he won. I can still hear a slight noise hum (fan), but it is not from, and the screen remains black. Nothing lights up.
  I tried to cool, I tried to remove the battery, nothing works.
  I tried using F8 to repair, but is not answer either.
  I don't want to reformat it completely right now that I have docs and photos which I did not have time to put on the disk.

  Anyone would be able to help me with this? That's my working tool, so I'm kinda stuck with this problem.
  A big thank you to all those who can help.

  Kind regards
  Stéphane

  Hi Stephanew,
  as I recall it has an ati graphics card...

  but try this to get your machine to work:

  -pull out the hard drive to protect your data (Let's hope that there is no damage yet...)
  -take out the battery and try to start only with the power adapter > shoukld you see the toshiba on-screen logo > failure other components can be 'guilty '...

  -attach an external monitor to your computer and check if there is a visible image > no image at all?
  -check the memory, for this purpose, remove the memory and test if the satellite "buddies" > heard some of this? Yes?

  iasume the grafics card disappeared... see your certified partner...
  Let us know if this helped you.

• Satellite A200 screen remains black when you try to start

  Hi all

  My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.

  After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.

  I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.

  I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.

  That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.

  Thanks in advance,
  MrRoy

  EDIT:
  After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.

  So, if this happens to you:
  1. turn off your computer.
  2. wait about 30 minutes.
  3. start in safe mode
  4. close using istead of now off button power button closure.

  It should work.

  Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.

  The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?

  Because I see that the processor does not work when I try start it.

  So let's say that this is the case, would it be the symptoms of my computer?
  And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.

  But now, my computer is simply not starting, as I said in my previous post.

  Thanks in advance,
  MrRoy

  -----

  Note: The Edit button was not there so I had to double post :/

• Failed to start the laptop - screen remains black

  My laptop does not start. Power led and load are also on, HDD LED, but has black screen.
  If I hit F12 when starting with my recovery disk in, I can hear the CD being run/search but screen remains black.
  Seems to me that the (bios) boot is corrupted. Anyone can advice?

  Hello

  As far as I know that these issues are resolved for the most part in combination with the BIOS and update the display driver.
  Maybe you should try to update both of them.

• HELP computer HPg61 turns on, the screen remains black

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Hello

  al1986 wrote:
  

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Try a hard reset:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Please post your results here.

  Best regards
  ERICO

• Satellite A100-495 - screen remains black after switching to food

  After feeding, the screen remains black, the computer no longer works.

  What can I do, why?

  > After the transition to power, the screen remains black, the computer no longer works

  It works fine on battery?

• I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

  When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

  starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

  What is going on?  Thank you very much

  Hello

  I suggest you do the repair of the system startup and check if that helps resolve the issue.

  Check the link for more information on repair system below.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  You can also check the event viewer for more information on the error message.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also:

  Resolve stop (blue screen) errors
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7