hp has extended the date of return to the offer of the College?
hp has extended the date of return to the offer of the College?
You need to ask HP directly for more information about this.
This is the support forum for the consumer and not a business unit of HP.
Tags: Notebooks
Similar Questions
-
ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine
ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine
Objective: move vmdk to store data with adequate storage and then increase storage D: 20G to 100G
Converter is not available on this architecture. Can I migrate cold vm to the different data store, no prob.
Question: Without use of the converter, method 3 can be used without a secondary vm? In other words, just by using target vm offline, online, offline? Or is it a problem of signing/OS disk on the Windows Virtual PC?
I need to move vmdk in different LUN and extend drive vm windows on D: (non-OS drive). Is this possible via the single procedure? Options?
To use method 3 to http://communities.vmware.com/thread/81121 requires available vm 'secondary', I did not.
Method 3? Using of vmkfstools and another VM of Windows to extend a drive
o stop the VM to resize
o log in the console ESX Server via Putty
o Type? vmkfstools? X & lt; new size of drive & gt; vmfs/volumes / & lt; storage volume name & gt;. / & lt; virtual server name & gt;. / & lt; the virtual disk name & gt;? That is to say. /vmfs/volumes/Storage1/my_vm.VMDK new disk size can be specified in kilo, mega, or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk of 20 GB of 24GO you would put 24000 m or 24g
o the second virtual machine to help stop
o change the second virtual machine settings and add the first virtual machine hard drive
o power on the second VM and load the disk management snap-in and verify that the first virtual machine disk has unallocated on it space
o select Start, run and enter diskpart.exe
o the command? the list of volume? This will show you all the volumes.
o select your volume based on the results of the list volume command, IE. ? Select volume 1?
o type the command? extend? to extend the volume
o check again the disk management snap-in and the volume is expected to be expanded with a greater ability
o stop the second VM and remove (do not remove) the record of it
o turn your first VM and the new space should be there and ready to use.
Also, I'm already aware of Dell extpar:
http://www.RTFM-ed.co.UK/?p=1310
for VI3, vmoiton of storage is made by RCLI plugin or a 3rd party
I prefer the plugin
In addition, if the option to increase the size of the disk in the VIC is grayed out, it sounds like a permissions issue. Finally, you can not extend the disc using the VIC, if the customer in question has a snapshot.
-
QUESTION: SE 2012 data display returns to the time graph each time
Hello
I have SigExp 2012.
If I try to add a data view and make a pledge of graphic style, thermometer, etc., as soon as I have the right up until it clicks, add my TC chain, the data view returns immediately to a graph time.
In addition, even if I use the graph of time, once I added the signal, it only let me see the string in a table, a chart of time or a waveform graph. Those are the only choices.
If I use a graph of time or a band of waveform graph, it does not read the signal correctly, but I can not configure the data view, the way I want it.
Is this a bug or I do something wrong?
Thank you!
This occurs when you try to change the display of a signal in its raw format "waveform".
You must convert your signals in scalar format. To do this simply add an amplitude and levels step (under: analysis > measures Time-Domain). Drag this DC signal newly converted to a new chart and right click on the graph to change the display.Honestly, I'm not sure why raw waveform signals are inherently limiting viewing functionality, but in such cases, it is.
You can also; According to the devices on which you use and the order in which you add to your DAQmx Acquire, some default signals step to scalar signals without having to convert.
See the attached screenshot and you'll see how the icons are different between the waveforms and scalar signals.
Hope that helps
-
My HP Photosmart D7160 one shows message this cartridge has passed the expiration date. I bought and installed the new cartridge but still same message. I really need to print stuff.
My HP Photosmart D7160 one shows message this cartridge has passed the expiration date. I bought and installed the new cartridge but still same message. I really need to print stuff.
Contact HP?
-
How to extend the volume of data in the Windows XP machine?
Victorinox original title: space Partition:
My C drive is almost full (110 MB only free) but my G, E, H readers have at least 23 GB of free space in each of them. SO can I do anything to divide the sapce. I know that to do something with the start menu. Can u direct me giving the steps.
I can leave 16 GB free space in each drive and have drive C with 21 more GB of space.
Hi AnirudhRamesh,
You can use diskpart.exe to extend a data volume in Windows XP.
For more information, see this link:How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008
http://support.Microsoft.com/kb/325590
Note: Before moving to take backup of any important data before making changes to the system.
Hope the helps of information.
Please post back and we do know.
-
I get this message - internet Explorer - data execution prevention has stopped the program
I get this message - internet exployer - data execution prevention has stopped the program and it freezes
Hello
EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspxThe problem might actually be an add-on or another program to the origin of the problem and you should check that
1st.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).Start - all programs - Accessores - system tools - IE with no Addons - does this work better?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
not better?
Close IE and try again IE or IE with no Addons
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
run as a scanner.I would add prevx so.
Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp-------------------------------------------------------------------
Do yourself a big favor and work through 1 above.
How control DEP but I don't recommend turning it off and certainly not to let power off.
How to enable DEP on or off for a program under Vista
http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.htmlHow to enable or disable DEP in Vista
http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html====================================
If nothing else works you can try this however I would use as a last resort.
IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
Online - APPLY - OK attacks close and restart IEI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I have some important files on my desktop and the fear that one of my employees has copied that data on its USB, is it possible to check if there was such a transfer, such as a history of copy, or something?
In my view, the above question sums up all, I'm not that computer savvy, so please give detail instructions, and if there is way to secure these files are copied or sent by electronic mail, please let me know, if I can avoid these problems in the future. Thank you.
You may not know a posteriori if this transfer took place. To prevent it in the future, lock your device by pressing the Windows key + L before you leave your office and keep your secret password.
-
How to extend the partition that has free space on the left with diskpart
I bought an SSD and made a second partition on my HARD drive to transfer my data. I had planned to clone and move the light to my SSD partition, but read that I was better to do a new install. I made a new installation on the SSD drive, deleted the old partition of Windows 7 and went to add to the data partition unallocated space (unallocated space is to the left of the partition). I know that you can not do this with disk management, but I've done it before on my laptop Windows 7 by using diskpart. I found an article earlier about how use diskpart to do what disk management may not, but I don't know how or where I found it.
I know I can do it with applications 3rd party like GParted, but knowing that it is possible, but don't remember how to do it with diskpart is driving me crazy. Can someone help me?Hi Schwaka,
As a general rule, it is very easy to extend the partition when the free space is right behind, but what can you do with the space left? Most people will feel that it is really a great difficulty.
Do not worry! Here I recommend you an easy to use, software AOMEI Partition Wizard Server Edition. It is so common among computer users and most of the people speak highly.
Your problem, there are two choices for you. We have to move the space unallocated behind, and the other is to merge the free space on the data partition. Both functions may not be permitted in Windows 7 disk management. In addition to the two features, more functions are supported to manage your drive.
Have fun with it!
Best wishes!
-
Creative cloud adobe has all the features of cs5 extended.
Creative cloud adobe has all the features of cs5 extended.
If this is not the case, what lack us.
Thank you
Ben.
Are what specific program you referring? There are many programs in the creative cloud. Most of the features should be always there but most likely access ways. Unless you be deprecated old technology such as server behaviors or Spry tools in DW for example they should be here.
But UI in almost all applications Adobe CC has most likely been radically changed since CS5.
-
Hello
I have two different points of view for the field due Date for a virtual machine.
In the Overview of the agenda , I have the correct expires date of (in DB) as you can see in photo 1.
Photo 2 shows the detailed view of the elements that one here is a date old expires before I extended the lease on this point.
I extend the term of the lease without the vCAC process "extend Lease Time.
I created a workflow to allow only 30 days to expand and write directly through the entity Expiration Date in the DB.
Is there another DB-field to be updated with the new Expiredate?
Is this a mistake?
I solved this by myself once I discovered how this view of retail.
See the solution here http://vautomate.wordpress.com/2014/04/17/extend-leasetime-in-vcac-with-vco/
-
Hi @all,
I want to thank my datastore on my 5.1 esxi.
When you extend the data store on the vSphere Client Console, I get the error message:
German: Call von 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' as Objekt "ha-datastoresystem" auf fehlgeschlagen ESXi 'IP' ist.
English: Call 'HostDatastoreSystem.QueryVmfsDatastoreExtendOptions' to object "ha-store system data" in ESXi 'IP' failed
Anyone an idea why I can't extend the data store? The new drive is correctly detected.
Best regards
Andreas Acker
Hello
This seems to be a local data store. ? This is where the ESXi host is installed. ?
Thank you
Avinash -
Extend the underlying data readers in the analytical unit
HI - hoping someone can help me.
We VCOps 5.6 installed and just recently have had an error come that there is less than 10% of free for the zone data. The tech docs suggest data that we wouldn't get enough or more space than we prefer.
I set some additional LUN but embarassingly I am not enough linux-y to ensure orders for properly extend the good player in this space - can anyone help?
I guess you run the paralytic.
You don't need to go to the operating system on the virtual machine to add additional space - just close the vApp, add an additional VMDK to each computer virtual where you need additional space and then restart the vApp. There is a startup script in the virtual machines that will recognize the new storage and expand space can be used with it.
-
Hi people
Version of the apex is 4.2
Oracle database: 11.2.0.2
I have created a simple form in a table on a table with the following structure
{code}
Name Null? Type
----------------------------------------------------- -------- --------------
TID NOT NULL NUMBER
TEAM_NAME VARCHAR2 (30)
EMP_NAME VARCHAR2 (30)
DATE OF REPORT_DATE
CATEGORY_NAME VARCHAR2 (30)
NUMBER OF CATEGORY_HR
CATEGORY_COMMENT VARCHAR2 (120)
CREATED_DT DATE
CREATED_BY VARCHAR2 (30)
STATUS VARCHAR2 (1)
{code}
In the form of default table is
{code}
Select
TID,
TID TID_DISPLAY,
TEAM_NAME,
EMP_NAME,
REPORT_DATE,
CATEGORY_NAME,
CATEGORY_HR,
CATEGORY_COMMENT,
CREATED_DT,
CREATED_BY
of ' #OWNER # '. " TIMESHEET.
{code}
I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this
{code}
Union of all the
Select
TID, null,
tid_display null,
team_name null,
emp_name null,
report_date null,
category_name null,
category_hr null,
category_comment null,
created_dt null,
created_by null
of the double
{code}
After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error
Current version of the data in the database has changed since the user has launched the process of update
Thank you
Navneet
Why are you insert an extra line manually in tabular from? There is a feature to add a line.
If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.
If you manually insert an extra line so that you have to write the update for this procedure.
Leave.
-
Hi all
Please find the below example scenario where I have to extend the set of data.
I working on oracle 10g and all by extending the data set, we should exclude weekends. The sample is only for 2 ID, but there may be more than one.
Thanks for your help.
ID ST_DT END_DT VAL ==== ======== ======= ======== 1 2/2/2011 2/4/2011 4 1 2/4/2011 2/8/2011 5 1 2/8/2011 6 2 1/28/2011 2/1/2011 2 2 2/1/2011 8 ID DT VAL ==== ======== ======= 1 2/2/2011 4 1 2/3/2011 4 1 2/4/2011 5 1 2/7/2011 5 1 2/8/2011 6 1 2/9/2011 6 2 1/28/2011 2 2 1/31/2011 2 2 2/1/2011 8 2 2/2/2011 8 2 2/3/2011 8 2 2/4/2011 8 2 2/7/2011 8 2 2/8/2011 8 2 2/9/2011 8 select 1 as id,to_date('02/02/2011','MM/DD/YYYY') as st_dt,to_date('02/04/2011','MM/DD/YYYY') as end_dt, 4 as val from dual union all select 1 as id,to_date('02/04/2011','MM/DD/YYYY') as st_dt,to_date('02/08/2011','MM/DD/YYYY') as end_dt, 5 as val from dual union all select 1 as id,to_date('02/08/2011','MM/DD/YYYY') as st_dt, null as end_dt, 6 as val from dual union all select 2 as id,to_date('01/28/2011','MM/DD/YYYY') as st_dt,to_date('02/01/2011','MM/DD/YYYY') as end_dt, 2 as val from dual union all select 2 as id,to_date('02/01/2011','MM/DD/YYYY') as st_dt,null as end_dt, 8 as val from dual;Hello
I guess, when end_dt is NULL, you want to use the current date as end_dt, and the results you have posted are the desired results if the query is executed on February 10, 2011.
Here's one way:
WITH got_n_days AS ( SELECT id, st_dt, end_dt, val , NVL ( end_dt , TRUNC (SYSDATE) ) - st_dt AS n_days FROM table_x -- WHERE ... -- If you need any filtering, put it here ) , cntr AS ( SELECT LEVEL - 1 AS n FROM ( SELECT MAX (n_days) AS max_n_days FROM got_n_days ) CONNECT BY LEVEL <= max_n_days - 1 ) SELECT d.id , d.st_dt + c.n AS dt , d.val FROM got_n_days d JOIN cntr c ON c.n < d.n_days WHERE TO_CHAR ( d.st_dt + c.n , 'DY' , 'NLS_DATE_LANGUAGE=ENGLISH' -- If necessary ) NOT IN ('SAT', 'SUN') ORDER BY id , dt ;Basically, each line of your original table must be repeated n times, where n is the number of days between (included) st_dt and end_dt (not included). The first subquery calculates this number and the main query results by combining your data with a "counter table", NTRC, which contains a line for each value of n that you may need. This 'table' is generated in the second auxiliary request.
The join produces a line for each day. The WHERE clause eliminates the Saturday and Sunday from these results.Thanks for posting the sample data in a useful form. That really helps.
Published by: Frank Kulash, February 10, 2011 14:29
-
Is it possible to extend the column title "DATE"?
Hi, I made a table;
SQL > SELECT * FROM BookCopy;
DATEACQUI DATEDESTR BTID BCID
120 9 9 FEBRUARY 06
The title means 'DATEACQUIRED' but it is said that "DATEACQUI".
Anyone know if it is possible to extend the title without using VARCHAR, thank youHello
In SQL * Plus, you can set the width of the DATE column as you would for a VARCHAR2.
COLUMN dateacquired FORMAT A12 SELECT SYSDATE AS dateacquired FROM dual;product
DATEACQUIRED ------------ 29-JAN-09
Maybe you are looking for
-
Is it possible the change the color of the text selected in a search?
When I search a web page for a specific bit of text, it is sometimes very difficult to identify the found text. If he could be given a lighter color or a flashing color, I think it would be easier to locate.David E
-
My iPad has suddenly started playing a ringtone when my phone rings. There is no option to do nothing the way there are alerts. How can I turn off the ringer? Thank you!
-
Is there a Bluetooth for Satellite A100-225?
Hello I wonder if a bluetooth module exists for a Satellite A100-225 (PSAA9E series). What model? Thank you
-
Suddenly, my iMac (27-inch mid 2011) works with my time capsule.
It shows that it is connected to the time capsule, but when I go on the internet, the screen says that I'm not online. However, my iPhone works very well using my time capsule as the router. My iMac has worked last night. I put to sleep and when I w
-
iPhoto-Mediathek ist nicht mehr lesbar
Nach dem Update auf El Capitan wanted ich meine iPhoto-Mediathek von einer externen Fliegengitter auf meine NAS übertragen. Der da forklift Dateimanager clearly is schließen Waschbecken nicht, dass die transmission lief, "schöb' ich ein another bad a