HP HDX 16 wireless problem solved

Similar Questions

• ZBook 14 wireless problem solved!

  For a few months now, my ZBook 14 (still under warranty) drivers wireless (Intel Wireless - N 7260 BN) were not loading at startup about 50% of the time.  Pilots would almost always successfully load if I restarted, but it was aggravating circumstances somehow.  I called HP Elite ZBook Technical Support and they walked me through several stages, including the uninstall and re - install the latest drivers, but nothing helped.  They arranged for a HP field Support Technician (FST) to install a new wireless card.  Personally, I thought it was a hardware problem, but that seemed to be their next step.

  So, today, their TSP arrived and quickly installed my new wireless card.  Well, it does not solve my problem, so she put the old card in and then began to make inquiries.  What she found is that even though my computer reported that he had the latest version of the BIOS installed, there is NO!  06/02/15, I allowed my computer to update to the latest version of the BIOS, which then was 01.30 (release date 09/12/14).  However, she discovered that a subsequent update of the BIOS (01.30 A) had been released only a week after the patch (dated 12/15/14) 01.30 in the desription of the BIOS update he said that it was precisely to add support for my card Intel Wireless-N 7260 BN

  Big CONGRATULATIONS to the girl TSPS for gap identification and the new installation of the BIOS update solved my wireless card problems!  I apparently never thought that because my computer reported that he had the latest version of the BIOS installed, and which does not recognize my "HP Support Assistant" software it was a newer BIOS available, either!

  Just for an update, even after my ZBook is update to the latest version of the BIOS (01.30 A), my "HP Support Assistant" software always reports that my version of BIOS is 01.30.  It of like the software recognizes numeric characters, but can not see the Alpha "A" character.  Just thought that info may help someone.  Proof that you can't ALWAYS trust your HP Support Assistant software...

• ZBook 14: ZBook 14 wireless problem solved!

  For a few months now, my ZBook 14 (still under warranty) drivers wireless (Intel Wireless - N 7260 BN) were not loading at startup about 50% of the time.  Pilots would almost always successfully load if I restarted, but it was aggravating circumstances somehow.  I called HP Elite ZBook Technical Support, and they walked me through several steps, including uninstalling and reinstalling the latest drivers, but nothing helped.  They arranged for a HP field Support Technician (FST) to install a new wireless card.  Personally, I thought it was a hardware problem, but that seemed to be their next step.

  So, today, their TSP arrived and quickly installed my new wireless card.  Well, it does not solve my problem, so she put the old card in and then began to make inquiries.  What she finally found is that even though my computer reported that he had the latest version of the BIOS installed, it didn't.  06/02/15, I allowed my computer to update to the latest version of the BIOS, which then was 01.30 (release date 09/12/14).  However, she discovered that a subsequent update of the BIOS (01.30 A) had been released only a week after the patch (dated 12/15/14) 01.30 in the desription of the BIOS update he said that it was precisely to add support for my card Intel Wireless-N 7260 BN

  Big CONGRATULATIONS to the girl TSPS for gap identification and the new installation of the BIOS update solved my wireless card problems!  I apparently would never have understood that because my computer reported he had the latest BIOS installed, and my "HP Support Assistant" software does not recognize that there is a newer BIOS available, either!

  Just for an update, even after my ZBook is update to the latest version of the BIOS (01.30 A), my "HP Support Assistant" software always reports that my version of BIOS is 01.30.  It of like the software recognizes numeric characters, but can not see the Alpha "A" character.  Just thought that info may help someone.  Proof that you can't ALWAYS trust your HP Support Assistant software...

• R50 Wireless problems

  I had a virus on my laptop, a R50 Thinkpad Type 1830 and had to do a complete reinstall. The only problem is that the installation disc was not for the laptop, but rather for my office.
  Since the virus has infected my computer, I have not been able to add my network connection. In Device Manager, there is no evidence for a wireless network card. I guess that's what is my problem.
  I have gone to the age of the R50 and downloaded all the drivers I could find. Yet it does not show any wireless adapter. There is more than one driver to download and not one of them works. I'm naïve about how I know what type of adapter on this computer. I'm not very tech savvy.
  I have a non-working R50 that I can open and take no need for parts, but I think it's unnecessary.
  I am beyond frustrated trying to understand this point and probably eventually find another laptop used. But in the meantime, if I could connect wirelessly, it would be great!
  If I downloaded all the drivers on the site, why wouldn't it show up in my device manager? And there is something under "Other devices" and has a big yellow question mark. It is titled "Network controller" I can't understand what it is for and how to make it work.

  Can someone help me?

  Problem solved! I found the right driver and clicking setup and everything is good now...

• eStn C510 printer wireless problem.

  eStn C510a printer is not connecting wireless.  Everything else works via the tablet or USB.  Performed each diagnosis known or studied by me to reset the indicator blue wireless flashing without result.  The detachable Tablet shows that the Zeen and SSID are related as well as the IP address.  The menu, however, shows that the printer is disconnected.  I am also the force close error: "the application Reader Avenue process com.hp.ij.reader has stopped unexpectedly.  Please try again. "Help!

  Problem solved after reviewing the post on "problem with WEP.  Had changed router 9100EM Verizon Ultraline series 3 model from its default from WEP to WPA/WPA PSK 2 via FIOS.  Unfortunately I had already implemented my C510 eStn on the Verizon router before changing in the Verizon In-Home-Agent of its default WEP to WPA.  Subsequently reset my C510 value by default factory menu Zeen and Eureka!

• WAG200G wireless problems

  Hi guys,.

  I recently bought the WAG200G and set up and it was working fine. After a month, the problem that has arisen is as follows:

  I try to search for wireless (WLAN) network but can not find. The PC that is connected via the cable works well, but used to connect wireless devices cannot locate the WLAN.

  As I told you, everything suddenly worked without Wi - Fi and fine including (WLAN). I change all the parameters, without power cuts too.

  All solutions,

  Kind regards

  Problem solved. Replaced unit.

• x 201 N wireless problem

  ThinkPad x 201-3294cto

  adapter wireless - realtek 802.11b/g/n wireless adapter II

  Laptop only runs at the speed of 54 Mbps when connected N 300mbps wireless access point.  Is there a problem with the Realtek cards?  Is there something I should do to work at 300 Mbps speed?

  OK - problem solved.  Discovered to run N Wireless 300mbps that I had to set the security on my Access Point

  WPA2-Personal-AES.  I think that this will be the future standard.  Thanks for the inputs.

• Camera not properly initialize since v. 4 - PROBLEM SOLVED

  I'll preface this with have not only I've done several ' resets all the ', I deleted all the files from camera loaded on the SD card that have been created in v.3 and after 'Reset All' was performed manually via the menu and re configure all my preferences instead of loading old sound of the SD card.

  With that of the road, my problem is 80% of the time that I start the camera with power supply or a battery, the unit freezes at the Sony logo on the submenu. Power must be cut (which has no effect), power removed/disconnected, wait the Sony logo screen disappears and then try to restart. It usually takes 2-4 trys until the camera manages to move to the "Sony" screen and performs full initialization upward. IM dreading the day that this happens on a job and the camera completely fails to start completely. I NEVER had this problem with all previous firmwares. Anyone else having this problem and any advice on how to solve this problem?...

  Side note: my first F5 made the day I brought home from Abel a year ago, but in this case the start of Sony screen wouldn't go away no matter what I or Able tried to do. They talked to Sony and said send it back, fortunately Abel gave me a new on-site and I never knew the question once again. Until now...

  UPDATE: May 30 - problem solved.

  Well it seems that everything has been healed. I went to Sony to Teaneck service yesterday and they replaced "PCB of HIF - 64" or, as we have been referring to him as the SDI card. Also updated the wheel to stop ND, design much better. Engineers, that I talked to had seen cameras having the same problem as me and reinstallation of the map is the apparent cure. Spoke with a Senior technician there for a good 45 minutes a range of topics. Was'nt able to get new information out of him, but he was very helpful and insightful no less. He said that the Japan is aware of the issue of sensor grid that some people have, but they have not been told that the solution will be even.

  Thank you Alister, I'll give them both a go and communicate the results.

• When the error is problem solver, I go to the store?

  When the error is problem solver, I go to the store?

  Please I need help English or Spanish

  If there is an error that you cannot solve at home, then yes the Genius Bar or authorized Service Provider Apple would be a good place to go. What is the error specific are you?

• Problem-solving with HP2311x and ProBook6455b

  Hello

  I have a problem-solving with portable HP2311x and ProBook6455b.

  Maximum resolution is 1600 X 1200

  Current display driver is ATI Mobility Radeon HD 4200

  However, my HP monitor supports the 1920 X 1080.

  I used only the external monitor without using the laptop monitor and the maximum resolution is always to 1600 x 1200.

  I also downloaded the drivers recommended by HP, but it does not solve the issue.

  I also tried with the drivers provided by AMD, but I get still more low resolution (1280 x 768) because the driver software detects is ATI Mobility Radeon HD 4250

  When I try to use the AMD Vision Engine Control Center stops unexpectedly

  I have conteacted
  Portrait Displays, Inc..
  http://support.portrait.com

  But they suggested me to contact HP because they were not able to solve my problem.

  Any help will be appreciated.

  Kind regards.

  I understand that you are not able to use the full resolution of the monitor even when the screen of the laptop is out of the question.

  Ensure that the system has the right driver for the monitor found here.

  You can try the support business forums as it appears that the two components are business models.

• problem solved

  problem solved

  Also the advice given above, I also would ensure that you have the latest drivers for touchpad

  http://support.Acer.com/us/en/product/default.aspx?modelId=2192

• WAG320N wireless problems

  I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

  Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

  I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

  Ethernet connection still works, but not via the wireless.

  I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

  Someone at - it suggestions? Thanks in advance for any help.

  What is the wireless settings you have set up on your router (SSID, channel and security mode)?

  Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• T40 2374-PU3 wireless problems

  T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

  Help, please!

  Thank you!

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

  After uploading, be sure to check out according to the instructions on the download page.

  I hope this helps.

• Installations of updates of Windows problems solved

  delete it please: problem solved.

  Why did not change your windows update settings to exclude recommended updates installer as are updates important?

  

  Use them,

  

• Windows 10 and Lightroom problems solved.

  Windows 10 and Lightroom problems solved.  I want to update my PC system and install LR 6 (nonCC)

  Any advice before proceeding would be appreciated.

  Thank you.

  Len

  Atul, I thank you for your response. I had read a lot of comments referred to as before posting my query. Not too encouraging - used LR 2/3/4 with operating system previous Windows without problem. Will sit on the fence a little longer on this one.