HP Installer has stopped working

Similar Questions

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• Windows Installer has stopped working and access is denied installation KB942288-V3

  original title: Windows XP SP3 installation problem

  My windows installer has stopped working. I tried several 'fixed' found on the net, but nothing is done and would be grateful if someone could guide me through the solution.   Windows XP, SP3.

  In 'Services', 'Windows Installer' has been designated 'disabled '.   I changed this "manual".

  msiexec /unreg works ok.
  msiexec/regserver gives an error: "an event could not invoke any of the Subscriber.

  I have downlaoded and ran KB942288-V3 and got ' Setup error.   Access is denied. "

  I watched the permissions in the registry and seems to have all the permissions are ok, but maybe I'm looking in the wrong place?

  Thanks for any help

  Hello Kaiser,

  I would say that if you update your PC from SP2 to SP3 all your files will remain same.

  Once you do a new Installation or a custom don't store all your network cards and other device drivers.

• Cannot install Windows PLUS updates. -Modules Windows Installer has stopped working...

  original title: cannot install MORE Windows updates.

  Greetings, people. My computer will download, but not install many of the windows updated.

  I think it's because of 'message "Windows Modules Installer has stopped working and was closed". Is this correct?

  Can I fix it myself? Thank you, Bob

  Hello

  try looking here's FixIt pro windows update:

  http://support.Microsoft.com/kb/971058/en

  LC

• Windows Installer has stopped working on Vista Ultimate 64 - bit SP2

  Hello

  My Windows Installer has stopped working all of a sudden (probably common last week).  I get no error message at all.  It simply doesn't get it.  The programs can be installed and uninstalled by there own systems updated, but the changes are not reflected in "programs and features".  When I ask Windows Installer to run under programs and features, I get the usual verification pop-ups, but once I click on the last approval, nothing happens.

  I tried to install a new Windows Installer from the Microsoft Download site and each time, the program "check updates" and I get an error message that says "this update does not apply to your version," (to paraphrase).  I tried to install Windows 6.0, v-2, x 64, but when it does not work I tried all (LOL) with the same result.

  At first I thought that my computer can was struck by a malicious code, so I ran MSE, remove malicious software (FULL) Windows for January and Advanced System Care 3.  All scans is come-up 100% clean!

  I tried to restore my computer to a point 3 days does not.  As Murphy's law would have, I disabled the restore before January 12 points.

  Windows Update online might work.  I get notifications for optional updates for MSE and AFAIK, they are applied.

  Edit: One more important thing, the uninstall on Advanced System Care 3 feature does more either.  It's almost like the hooks to the installer of Windows have been removed to that also.

  Installation service seems to be very well and the value 'manual '.

  Any thoughts on the subject?  I can reload Windows from "day 1", but would rather not.  Laughing out loud.  I have my drive so.  :-)

  Thanks in advance for your help.

  Intel DG-965WH
  Intel Dual Core 2 Duo E6300
  4 gig of RAM @ 800 MHz
  Windows Vista Ultimate 64
  NVIDIA 8500 GT (512 MB)

  
  

  A BIG 'Thank you' to Marilyn!

  -----------------------------------
  

  Start, CMD (run as administrator), sfc/scannow worked!

  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.  (C:\Windows\Logs\CBS\CBS.log)

  Why doesn't Windows come with a BACK order book any more?

  Thanks Marilyn!  You get a GOLD STAR for today!  :-)

• Windows Installer has stopped working.

  Whenever I try to install anything I get this: "Windows Installer has stopped working".

  Problem started yesterday or today. Don't know if this has nothing to do with what's going on, but the computer had a blue screen when running a scan with Norton antivirus.

  When I entered msiexec /? I get the same thing: "Windows Installer has stopped working".

  -----

  Also if I go here C:\Windows\SysWOW64 perform msiexec.exe it I get this:

  Windows® Installer. V 4.5.6002.18005

  msiexec/option [optional parameter]

  Installation options
     
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
     
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  ---------------------------------------------------

  However if I go in "C:\Windows\System32" and run the msiexec.exe which is where I get:

  "Windows Installer has stopped working".

  And another window that says:

  "The application could not initialize properly (0 x 0000005). Click OK to close the application.

  ----------------------------------------------------

  Edit:

  I went to HKLM/System/CurrentControlSet/Services/msiserver

  By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

  I was able to install only certain programs.

  I was able to install the rescue of the music. But I wasn't able to install iTunes 9.2

  -------------------------------------------------------------------------

  I am running Vista Home Premium:

  Version: 6.0.6002 Service Pack 2 Build 6002

  64 bit

  How can I fix it?

  Haha. Thank you Michael.

  But I have to able to do work properly now. I'll post any major change (that I remember), just in case where someone wants to try what I did.

  ---------------------------------------------

  I deleted everything I could in my temporary files.

  Then I went "HKLM\System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations" and cleared the entries.

  I went to HKLM/System/CurrentControlSet/Services/msiserver

  By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

  Restarted my PC

  HKLM/System/CurrentControlSet/Services/msiserver/ImagePath change back to "%systemroot%system32\msiexec c".

  A run "cmd" and input "msiexec /unreg" then he walked "msiexec/regserver".

  My PC rebooted again

  Profit :D

  Worked for me.

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• TSP Installer has stopped working

  During the system startup, I get an error message ' TSP INSTALLER FOR WINDOWS HAS STOPPED WORKING '. Please could someone help me get rid of this

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Process host and Windows Modules Installer has stopped working and was closed!

  Hello

  Some error messages I get are "host process for Windows Services stopped working and was closed" and "Windows Modules install Stopped Working and was closed."

  It didn't happen until three weeks ago, when I did a system restore.

  I searched the internet for a while now and can't find anything.

  Thanks I hope you can help,

  Michael

  Hi Michael2017,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to install updates on the computer?

  Windows Module installation service are the two basic services responsible for all your updates installed correctly. Windows Module Installer service enables installation, modification, and removal of Windows updates and optional components. If the Windows Installer of Module service is disabled, install or uninstall windows updates may fail.

  Check and make sure the installation Module of Windows service is running on the computer

  (a) click Start; in the start search type services.msc and press ENTER.

  (b) ensure that the installation of Module Windows Service is running and the startup type must be handwritten.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Skyrim, error Installer has stopped working.

  I can't install skyrim.evertime I run setup.exe it always stopped working, im already try with run as administrator but dint work, im using regutility setting instead my setup it makes my computer error can't start windows correctly.and this problem not only akyrim.lots of my program cant stat too.this happen when im reinstalling windows 7 ultinate.

  Hello

  • Do you have an error message when you run SFC scan?
  • Have you tried to install the game on another folder and check?

  Program installation or removal fails due to corrupted registry or install blocked key. Follow these methods and check if that helps:

  Method 1: Unregister and register the Windows Setup program again

  1. Click Start, click run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  2. Click Start, click run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Try your application based on Windows Installer again.

   

  Method 2: I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also refer to this link: http://windows.microsoft.com/en-us/windows-8/how-find-remove-virus

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• HP LaserJet MFP Pro M127fw Installer has stopped working

  Have difficulty installing drivers HP LaserJet MFP M127fw Pro portable 32-bit hp with windows 7

  Build in software printer stops at Midway

  Downloaded software stops at Midway

  Printer driver standard windows 7 works very well and can print with it, but has no scanner driver

  Doctor scanner HP printer indicates the scan software is not installed and directing me to download driver on the hp website

  installation of this software also stops at Midway

  No errorcodes anywhere, box Installer just message could not continue and try to find a solution. This box diapears as well.

  Installation fails on cable network and usb

  no error messages in the logs of windows

  The http connection works fine

  tried installing with smart installation on and outside (is disabled for the moment)

  Spooler service works well

  We searched this forum more people seem to have this problem but there is no solution mentioned in the end.

  Help, please

  @Gemini02

  Thank you for your help.

  I'm afraid it does not either, I don't use McAfee but Avast.

  Stop Avast, or stop the firewall (windows standard) does not resolve the inability to run the installation software.

  If I unplug the USB cable, the virtual CD in the printer disappears and so cannot run uninstall.

  I didn't want to stop all services, because I don't know what he must stop and don't want other problems that may be difficult for me to correct after a reboot.

  Also, I didn't want to install as administrator, I cannot guess.

  My solution that worked in the end is:

  Connected the USB cable.

  A printer icon appears but with red crosses indicating missing and software scanner fax.

  Right-click on this icon of the USB printer and select software update. the research on the internet.

  Downloaded and installed the correct software without problems.

  I cannot now use the scanner software using the network (wired), but I can live with that.

  The printer works fine on the network. Scanner only via USB.

  Again, thank you for your help.

  This band of turnover can be now closed.

• "Windows Installer has stopped working". After going to 'manage' under 'computer', I find that windows install is missing from the directory 'services '.

  I managed to solve the problem by doing something with my registry. Now after a week his new broke and I don't remember how I fixed it. I am running windows vista ultimate. I discovered that it was broken again by trying to download java. HALP.

  I rebooted my computer in any way, and nothing has worked. However, it seems even e-mail links have stoped working.

  I can only suggest that you back up all your personal files and folders you want to keep in a flash drive or an external hard drive, then...

  1. If your computer comes with a Vista installation DVD, you can use it to perform a repair installation.

  Repair for Vista installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
  If you do not, find a friend who has a. Make sure it has the same version of bits as yours.

  2. If you have a set of recovery disks created at the time you purchased your computer, use and restore your computer to 'presets' (as the first is out of the box)

  If you do not have a set of facts, contact the manufacturer of your computer, ask a set of recovery disks. The cost is very low and it is well worth the expense.
  In the same Helena ask to speak to a technician. Ask the person to teach you how to access your recovery partition (if you have one) and how to use it to restore your system.

  The recovery partition was the installation by the manufacturer of your computer. They know exactly how to use it.

  With my limited knowledge, that's all I can help you.

  ........................................................................................

  Someones with a better knowledge of the computer may have better ideas to solve your problem.
  Please wait for another entry of others.

• Error "the HP Installer has stopped working" in Windows 7

  I have a hp deskjet printer 1660.  I downloaded the driver to install it on my Acer laptop several times but I can't seem to reach the stage of extraction.  Its extracts but then no window opens later.  I have a Windows 7 operating system, which can make?   Can firewalls or else be interrupting the driver installation?

  OK Antonio99 after doing some work that you told me about the processor, I found the answer and now my printer prints.  It turns out that I had to install a patch, whatever that is.  Here is the link for instructions, I followed

  http://support.HP.com/us-en/document/c02073861

  Thank you for your interest and your help.

  Greetings from Bahamas

• SQL Server 2005 pack 2... does not install... and now the patch installer has stopped working

  problem signature:

  Problem event name: APPCRASH

  Application name: hotfix.exe

  Application version: 1.4.1549.0

  Application timestamp: 4891da2c

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e03821

  Exception code: c0000005

  Exception offset: 00041e57

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Additional information 1: crowd

  More information 2: e8adce1c2b9e7be834b4063ac3c53863

  Additional information 3: crowd

  Additional information 4: e8adce1c2b9e7be834b4063ac3c53863

  Hi there, try this forum experts-

  The SQL Server installation & set program at level
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services

• Can I solve the problem "Update Standalone Installer has stopped working" myself or do I have to spend the money - what is phone of Microsoft technology solutions?

  Trying to install Intuit app when I got this message. Told by the people of product that I needed to update windows. Same message got that. Told to call Microsoft who said I could buy tech help but must call HP - my main supplier (same kind of skin you get with insurance). Very frustrated and would like to know if I can fix myself or need to buy something (help or product).

  Hello joanicooki,

  This thread has been created in the Windows Update forum; the Microsoft moderation team has moved this thread on the Forum of programs.