HP J005AX: Lack of WIN 7 USB Drivers for HP J005AX

I recently changed the operating system windows 8 on my Windows 7 ultimate 64-bit HP J005AX. I managed to get everything works except the USB ports. They appear in devices such as Manager with no driver. I tried the drivers for other models J005 but none doesn't (including windows drivers 8) works. Does anyone know if there is a driver that will work these or if any other work around

Hello:

You need these drivers...

SMBus Controller: Installation and reboot.

http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127758_1

Graphics: See if it works...

http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_146053_1&swEnvOid=4058

USB3: Install these two and restart.

http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_125616_1&swEnvOid=4058

http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_123787_1&swEnvOid=4058

Ethernet:

http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5409278&swItemId=ob_143277_1&swEnvOid=4058#tab1

Let me know what model wireless network adapter has your model and I'll post the link to bluetooth driver you need.

Post the hardware ID's for unknown devices, and I'll post the links to the drivers, you need for those too.

Tags: Notebooks

Similar Questions

  • 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

    Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.

    I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.

    The drivers are located here:

    Aceeca Driver Downloads

    (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

    Installation instructions for Windows 7 (from Aceeca) are included in the download.

    Basic instructions:

    1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.

    2. try to HotSync your device.  It will fail.

    3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."

    4. right click on the device and choose "Update driver software".

    5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.

    6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".

    7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

    Good luck!

    NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

    If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

    To Palm Desktop run as administrator every time in Windows 8 / 8.1:

    Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

    Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

    Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

    At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

    Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

    If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

    Palm HotSync configuration

    WyreNut

    Forum member bobboffin has added this message:

    "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.

    Open Notepad and paste the following two lines are:

    Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
    Start devmgmt.msc

    Save it as SetDev.bat in My Documents.

    Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.

    On the view menu, select Show hidden devices.

    You can now see in the other position of the device with a yellow triangle against it.

    You can now proceed to install the drivers according to the instructions.

    Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.

    I hope this helps!

    WyreNut

    pattirclark wrote:


    SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

    Thank you again...

    And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

  • USB drivers for HP50g on Windows 8 (64-bit)

    Hi all

    Has anyone tried installing the USB drivers for the 50g on Windows 8?

    Conn4x installed well but USB drivers comes. I tried all available troubleshooting options using the features of Windows 8 compatibility (XP, Vista and 7) and none of them worked.

    So I was wondering, maybe someone here may have already installed and could share some tips.

    Thank you

    Márcio

    I read messages in other forums indicating that the conn4x and the USB driver peut be installed.

    The post on the forum indicated that Windows 8 comes pre-configured with the possibility for signed drivers enabledapplication.

    In order to install the USB driver, signed driver enforcement must be disabled.

    See this forum comp.sys.hp48 post it here:

    https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/win$208/comp.sys.HP48/tzpjXzysXrU/-XZbRLN2CucJ

    Please inform the forum if you succeed, and what measures allowing you to complete the installation.

  • Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

    Hi all

    I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

    If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

    Thank you! -Le Cannet

    Here is where I found the drivers (but with no mention of USB drivers):
    [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

    > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

    USB drivers are part of the Windows operating system.
    The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

    In addition, the chipset driver must be installed.

    I checked the proposed link in your ad and here, you can download the Intel chipset utility.
    The update of the BIOS is also available

  • Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

    I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

    PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
    PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
    PCI\VEN_104C & DEV_8241 & CC_0C0330
    PCI\VEN_104C & DEV_8241 & CC_0C03

    Thanks in advance to anyone who can help

    Hello:

    This driver should work...

    Texas Instruments USB Controller Driver

    File name: sp70786.exe

  • Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

    Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

    On Fri, 28 September 2012 18:02:40 + 0000, bertcoy wrote:

    Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

    Looking at the website of Olympus, it would appear that we do not
    There are.

    But you do not need a driver because you do not need to connect your
    camera to the computer. Just put the memory card in a card reader and
    access like this instead. I prefer to do it with my camera,
    because it is easier, faster and uses no battery in the camera.

    Ken Blake, Microsoft MVP

  • SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3

    Hello

    My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.

    We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.

    I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).

    We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.

    Any help/pointers gratefully received

    TIA

    Elmer

    Hello

    Please check the following post:

    http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/SM-bus-controller-and-USB-controller-drivers-for-Pavilion-P6/TD-p/2814635

    Kind regards.

  • I5-d001sx: could not find the usb drivers for win 7 32 bits for the model 15-d001sx

    Hello
    I have hp laptop 15-d001sx. My USB doesn't work not with win 7 someone can you please tell me from where I can download the usb drivers.

    Hello:

    Download, unzip and run the file setup.exe from the link below...

    https://Downloadcenter.Intel.com/download/24503/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC

  • Win 8 required drivers for Dynadock U10

    I can't find the dynadock u 10 drivers for win8.

    Hello

    There are no special software for a Dynadock U10.
    Only a display driver is necessary and if you are looking for the display driver to win 8 Dynadock U10 I recommend that you check the http://www.displaylink.com/support/downloads.php page

  • Win XP need drivers for Qosmio X 300-11

    Where can I download drivers for X 300-11 for Win XP?
    Where can I download the driver SATA HARD drive into the Win XP installation?

    And last question, I understood P8600 is the latest processor series when out for example P8900 can I update?

    Thank you.

    Hello!

    No available Windows XP drivers are the Qosmio X 300-11. I searched on the Toshiba driver download site but I t didn't find anything.

    But you can search on other sites to get Windows XP drivers. Here are some examples:

    Intel chipset: [www.intel.com]
    Realtek: [www.realtek.com]
    NVIDIA graphics card: [www.nvidia.com]
    WLAN: http://195.182.196.33/wlan/
    Bluetooth: http://195.182.196.33/bluetooth/

    I put t know when comes out the P8900 but. You can upgrade the processor, but it will be not supported by Toshiba.
    I think that the P8600 is fast enough for all.

    Bye!

  • SM Bus controller and controller USB drivers for Pavilion P6 - 2307 has

    Hello

    I am trying to find the drivers for SM Bus controller and USB controller for the Pavilion P6 - 2307. If I go to download drivers and download updates, it does not install it. I run Windows 7 64 bit and I made sure I downloaded the correct drivers.

    At their launch, Windows 7 comes in asking if the run installation program correctly which means that somehow it didn't. It then asks if you want to run it in compatibility mode and if I say yes, nothing happens.

    Can you get it someone please let me know where I can find the correct drivers to make it work on Windows 7 64 bit.

    Thank you

    SAJ

    Hello

    Please use the following driver for SM Bus controller:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 5037949 & prodNameId = 5037951 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-88640-1

    and what follows for USB:

    http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56138.exe

    Kind regards.

  • Win XP 64 drivers for Satellite A305-S685

    Hello

    I bought a labtop A305-S685, which is 64-bit.
    I installed Win xp 32-bit, but its a lot slower, so I got Win XP 64 bit for better performance, but I have found no driver for XP 64
    on the Toshiba site...

    Can someone help me?

    The Windows XP 64-bit drivers don't exist and I doubt that they will be available in the future. The point is that the XP 64 bit is not so popular as Win XP32bit and more 3rd party apps don't work on this OS.
    Now the Vista is future or until that Windows 7 will be available: D and I think that you will get only the drivers 64 bit Vista for this unit.

    Maybe you can collect some drivers 64 bit of Win XP to the unique address of any websites 3rd part.
    This is your last chance.

  • Help! Need the USB DRIVERS for my HP G6-2123us 3.0!

    Did a fresh install of windows 7.

    Went to the pilot site could not find drivers for USB 3.0 for this computer.

    They worked before I did a new install.

    This laptop has usb 3.0 ports so please help me!

    Thank you, Lawrence

    Hello

    Well, you asked for USB 3.0 driver but actually NOT. The use of the fix to SM Bus controller would help:

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?rule=60443&cc=us&DLC=en&LC=en&OS=4063&product=5273777&softwareitem=ob-116222-1&sw_lang=

    Then, install the above to USB.

    Kind regards.

  • How can I install usb drivers for win98 or win98se without cd player?

    I have an old laptop Dell Inspiron 3000 in my closet I have desided to fix so I have downgrated for win98 winme and I can't find the usb drivers?

    and I don't have a cd burner or a dvd burner! Please give me drivers win98 and win98se =)

    Hi TheTechKid607,

    Windows 98 is a Microsoft product. There is no support available for Windows 98.

    For more information, refer to this link: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

    Hope the helps of information.

  • USB drivers for dv6-6c35dx

    I have problems getting my USB ports to register at all, it shows the usb controller drivers are installed and working properly, but when I plug something in it does not, please help

    then, I thought about it... the USB drivers are part of all freakin GRAPHICS DRIVERS, thanks a lot yall

Maybe you are looking for