HP jet 7500 a desktop: office jet 7500 a print does not correctly

Similar Questions

• Laser jet 1018 HP printer does not

  Original title: Laser jet 1018 HP printer does not

  I have a Laser jet HP 1018 and lost the disc printer if I can get any computer to be able to communicate with him. I downloaded the software that I thought I was able to run the printer, but nothing works. What else can I do to get the two to talk so I can print?

  Hello

  ·         You get the error message?

  ·         Did you install the printer without any problem drivers?

  ·         Were there recent changes made on the computer before the show?

  Step 1:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Step 2:

  Try to remove old drivers and reinstall the most recent drivers from the HP website and check if it helps.

   

  Add or remove a printer

   

  Find and install printer drivers

  HP LaserJet 1018 printer support site about the installation, see also:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1814094&LC=en&cc=us&DLC=en&lang=en&cc=us

• Office Jet 3520: my printer does not print as is a document to demand that I can't remove.

  I made a mistake, while printing a document that has caused a problem catalogue scheduling system. There is a box to 'See what's printing' on my computer that should enable me to cancel printing that I tried to do a number of occasions however the document remains always there whose status is indicated as "suppression" and in this condition for 24 hours now. Is there another method to clear or remove the document from the Scheduler please?

  Hi @Woodmere8,

  Welcome to the Forums of HP Support!

  I see that some print jobs stuck in the queue on your computer, while tying to print to your HP Deskjet 3520 e-all-in-one printer. I'd be happy to help you with this.

  Here is a document that I recommend that you try, HP printers - Print Jobs stuck in the queue (Windows).

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Resized Office Photoshop CC 2014 printer does not

  I have the documents PSD of different sizes that I need to print on letter size paper. The first document that I work with is 8.75 "x 11.25". The option to scale does simply not work.

  The process I use is the file-> print, Print Settings-> paper handling, select scale to paper size. I get a message saying that the image is larger than the printable area of the paper. some clipping occurs. Scale to fit paper size does not have to adjust things there is no clipping? I go about it the wrong way? (This seems to be the same process I used in CS6, where he worked with a problem).

  My copy of Photoshop is up to date. Operating system is OS X 10.9.5.

  I had this problem today (Yosemite / PS CC / Ricoh) and figured out - hope this helps:

  In the print dialog box, it is not immediately obvious that the Panel down to the right containing 'Color management' is drop down because it seems to be perfectly formatted for a fixed Panel - but it is, and if you scroll down, you will see 'fit to page' options.

• Printer does not print on HP Laser Jet 1020

  I use i5 Dell Studio with Windows 7 64 bit. I have a problem in printing using HP Laser Jet 1020. I have no problem with other printers such as HP Laser Jet 2600n (wireless network) and all-in-one HP PSC 1410.

  With HP LJ 1020, no response from the printer when printing (from all programs). I have re-installed the latest driver from the Web site of HP but does not help. When printing, the printer does not work with all the lights are flashing. However, the printer spooler showed that it was printed without the tail of any job. TeSp print page is not working too. Tried troubleshooting printer shows as not any problem. I tried the printer with a friend's computer and it works perfectly. Please kindly help thanks.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?OS=4063&softwareitem=bi-58677-3&LC=en&DLC=en&cc=us&lang=en&product=439320

  Initially bought laser jet printer 1020 for windows xp laptop.

  I just bought a new pc with windows 7.

  I opt above site to download the upgrade for windows 7 for my new computer. Note: I did not use records of pilot provided when I bought the printer.

  I downloaded the upgrade, saved on my computer. I then ran the downloaded software and my printer was automatically installed and I tested with a test page print all right.

  I hope this helps someone.

  DRC

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Microsoft Office Home and Student 2010 does not work.

  I've updated from Windows 7 to Windows 8, but now my Microsoft Office Home and Student 2010 does not work. What can I do to get the program from Microsoft to work on my HP computer? Please let me know if anyone can help me with this problem. Thank you.

  Me too!!  I recently upgraded from 7 to 8 and have now lost my Microsoft Office 2010 software. I have the product key, but have failed to download and access software.

• I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  Hi edwards39572619 ,

  Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

  Let me know how it goes.

  Kind regards

  Christian

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• HP color laser jet cm1312 mfp sharing does not work

  Hello, I have a problem.
  The this printer to connect to the server (windows 7 32 bit, latest driver).
  Other users (network) may not print, but after restart server, everything works...
  What is my problem? Help, please.

  Hello

  To understand the issue correctly, try the following:

  1. If all the shared PC are not able to print, check if you are able to print from the server PC.

  If print server as PC still work, there will be some communication issue betn the server and the other computer on the network.

  2. If printing from computer Sever also does not work unless you restart the server PC, it might be a problem with the spooler on the server or the printer driver. You can try to reinstall the printer driver and the reshare to PC network and check.

  3. this question could also arise from the printer itself. Tray to update the Firmware of the printer to the latest version and check.

  4. If the driver on the server is offline, try now to turn off the SNMP state:

  From the Windows desktop, select Start, settings, and then click Printers. The icon of the pilot series HP LaserJet XXX, right-click and select the Ports tab, check if the correct network (IP address of the printer) port is enabled in the list of ports, click on the button Configure the Port, in the Port Settings window, uncheck the box next to the option "SNMP status enabled" (disable), click OK to save the settings , click on apply and then click OK to exit the properties of the driver.

  See you soon,.

  Manjit

• Desktop slideshow shuffle setting doesn't work does not correctly?

  I use the slide show feature office with shuffle turned on definition, tuned in a directory with 438 in distinct images. The slide show is set in advance every 3 minutes; a little math tells you that you should be able to go nearly 22 hours, or an entire day, without seeing the same image twice.  However, it is not blocked by my experience.  In general, I see the same five or so images twice in 20 minutes on a cycle of rotation for about 3 hours, with the last image gradually getting slowly off to be replaced by a new image that gets recycled several times.  It also seems to be strongly weighted towards a small part of my photos, which means that I see some of them a lot and most of them almost never.  They are all named 1 at 438, in a report by 4-1 rough of jpg and png images.  There are about 10 hidden files in the directory that represent the originals I edited to better integrate, then hid so they would not happen.  My questions are two:

  1. How can I change the parameter called 'shuffle' be really shuffle?  Now it's closer to randomly and a poor at that.  (The two terms are very different, think about a card game.  If you mix them and then draw one by one, you are not continuing to draw the ace of spades five times in there, only once.  Considering that, if randomly draw you a card game, you can get the two clubs (or this map of rules dang you forgot to subscribe) several times in a short period, even though it is unlikely).

  2. is it possible to assign some zoom settings unique to each image below which gives a white border in MSPaint?  Most of them are very close to 16:9 format, so the fill setting works pretty well generally. Some are portrait, however, and they are just looking for Dingo. But, if I put it to the Fit, all my beautiful almost-fitting-rectangles black terrible blodgy borders around them.

  * (I am ready to change registry values and make another statement of intermediate or tinkering does not install a program. Most of this comes from a desire to hammer Windows in the face until it does what I want, even if he thinks that I shouldn't be able to).

  TL; Dr. - the broken or misnamed shuffle function, how to fix it without 3rd party software?

  Hi Zeke

  Do not look any logical order when you have the option to shuffle activated.

  This question often came during the beta of Windows 7 and has been tested extensively.

  In this case, the true meaning of Shuffle is followed.

  ' Shuffle: transitive and intransitive verb rearrange the order of playing cards: reorganize playing cards randomly so that the order is not known. "

  Documentation.

  "Select the shuffle check box to have the pictures appear in a random order"

  Create a desktop background slide show:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-desktop-background-slide-show

  Concerning

• Cannot open or uninstall Office creative cloud because it does not

  MacBook Pro 2011, OSX 10.10.1 I downloaded Creative Cloud desktop a few hours there to start using my new CC account.  The application of office hung up when trying to create the list of applications CC (as reported in other discussions).  I tried to restart, but it's still on upward.  He wouldn't leave (resignations grayed out options and no effect of choice leaving the dock.)  I tried "intelligently" uninstall... simply deleted the icon for the Office of the CC of the menu bar, which then reported that it was "impossible to leave the Office CC; leave the CC Office and try again. "Trying to open the CC Office since the product finder the interesting message that the Office CC 'cannot be opened because it does not. "I can't reinstall, uninstall, open or leave... just keeping it hidden CC Office Caryl far in the background, making the very hot MBP.  Any ideas?    -Jose

  Thank you.  Unfortunately, none of these solutions worked for me - but this fact:

  After force - leaving the CCdesktop app and re-install, I found the same problem with the CC cleaning tool - it was hidden in the background and do not quit smoking.  A normal - stop force taken care of him, allowing me to reboot and recheck the office.  Yet the rotation of wheel of progress...

  Another thread referred to people Adobe help the computer screen sharing and deleting the old files in previous Creative Suite installs.  So I looked through my Application Support folders and found old things related to CS4 and CS5.  I deleted them, rebooted, and apps appeared quite happily in the CC Office.

  I am now in the business.

• Drag a tab on the desktop (or in the tab bar) does not open that URL in a new window, only a new window with a blank tab FF4 RC2 (made with RC1 as well).

  When I drag a tab open existing tab FF4 on my desktop toolbar, a new window opens as expected, but the tab in this window does not load the URL of the tab dragged from the previous window. The tab "Move to a new window" menu item is the same as well.

  I disabled the Tab Mix Plus add-on, but it made no difference. Is there a setting somewhere that I'm missing?

  I use Tab Mix more and do not have this problem.

  You may need to try Mode without failure of Firefox to see if an add-on is causing the problem; See: http://kb.mozillazine.org/Safe_Mode

  • In Firefox 4, to enter Safe Mode, hold the SHIFT key while clicking on the icon of the desktop Firefox 4.
  • Firefox Safe mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, place you in the DEFAULT theme: Tools > Modules > Themes before start Safe Mode. When you enter Safe Mode, do not check all the items in the window, just click "continue mode without failure." A test to see if the problem you are experiencing is fixed.
  • If the problem does not occur in mode without failure, then disable all your Extensions and Plug-ins, and then try to find out who is causing by allowing both the problem reappears. You MUST close and restart Firefox after EACH change via file > restart Firefox (on Mac: Firefox > Quit). You can use 'Disable all add-ons' on the start safe mode window.
  • See below for more information
    • http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes
    • http://support.Mozilla.com/en-us/KB/troubleshooting+plugins
    • http://support.Mozilla.com/en-us/KB/basic+troubleshooting

• Office work 9 spell check does not

  Hello

  When applying for a spell check on Works 9 it says files missing needs a reload.
  I can't as it came preloaded. New laptop to 2 weeks of age.

  It came with the trial of OFFICE 2007 which I use. Spell check works OK.

  Spell check does not work on enamel, but fixed by changing to non-English chossing then English.

  Thank you

  Ray

  > The message I get is 'Works cannot finish checking the spelling and grammar because an error occurred. Some files may be missing or damaged. To resolve this problem, please reinstall Works.

  In your case, you will need to reinstall the complete picture Toshiba because of my knowledge, this software is just part of the picture, and it was not delivered the external drive of Microsoft.

  So if you want to get a disc from Microsoft then I guess you'll have to pay for it.