HP K2500 keyboard: compatibility of the keyboard and Wireless mouse

A few months ago, I bought a HP x 3300 wireless mouse for my Lenovo PC. Today, I bought a wireless HP K2500 keyboard and was hoping to use the same nano dongle. I can't make it work and so I am currently using 2 nono donlges. one for each device. Is it possible to rotate the two pieces of the kit through the same dongle and if so, how can I do?

Advertisement

Hello @AndrewL1,

Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

I understand that you have a problem with the wireless keyboard and mouse, and tried to help you!

Unfortunately, you cannot connect two devices to a USB receiver.  You will need the USB receiver for each device.  I hope this helps.

Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

Have a great day!

Tags: Notebooks

Similar Questions

  • My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

    My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

    have you tried to change the batteries in the mouse?

  • installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

    installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

    Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

    To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

  • using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Hello

    I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

  • Keyboard and wireless mouse is not matching

    I just updated my iMac to El Capitan, but my wireless keyboard or wireless mouse are recognized and will not pair with the computer.  I put in new batteries but still not working. Any thoughts? Thank you!

    Try to go to your system preferences > Bluetooth and remove them and then re-add-the.

    First read this Apple Knowledge Base article

    OS X El Capitan: pair a keyboard Apple wireless, mouse or trackpad with your Mac

  • With the help of transmitter USB for keyboard and wireless mouse 3000 in Vista

    a friend already has the Wireless Mobile Mouse 3000

    and just purchased the Wireless Keyboard 3000 .

    They both work w / USB 2.4 GHz transceivers, and they do not work OK using both of the receivers that accompanies the individual purchases.

    I was wondering if it is possible to use a single USB transceiver for both devices instead of two... hoped that this would be the case because they are the two series "3000" operating in the same band.

    Some hoped it would all just automatically connect, but no luck.  I can force it to use a two-way radio?

    Thanks for any help / suggestions

    * original title - use Transceiver even for (2.4 GHz) wireless KB & mouse that were purchased separately? *

    Hi moonstruck67,

    We cannot have the same transmitter/receiver for two wireless devices because it is not supported.

    You need to do the same with wireless Bluetooth technology.

    However, if you want to force the installation, try the following steps:

    i. Click Start

    II. Type in devices and printers

    III. right-click on the transmitter/receiver

    IV. If you have the opportunity to connect or sweeping, try the option and check if that helps.

    Link, please refer to:http://www.microsoft.com/hardware/mouseandkeyboard/features/bluetooth.mspx

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • connect a keyboard and wireless mouse to new hp 5010

    I have a new HP 5010 all in a desk top that came with a wired keyboard and mouse.  I have a wireless HP keyboard and mouse I want to use my old HP desktop.  I ran 'add new devices', several times, but may not recognize the wireless keyboard and the computer mouse.  I am running Windows 8.1.  I have no paperwork or records for the 2 items, so I'm not havin no chance to find it.

    Hello

    What is your whole keyboard and mouse? They come with a USB dongle?

    • If Yes, you need to adapt this dongle for new machine and you have nothing to do, they will work automatically.
    • If not, this means that they use Bluetooth or receiver built in, in this case, your machine must have bluetooth or a receiver.

    My question: do you know what is the model of all keyboard and mouse? (Look at the bottom of the keyboard).

    Kind regards.

  • Keyboard and wireless mouse no longer works

    my keyboard is msi star type ES500W. Computer... top of wind msi ZE2010. After changing the batteries in the keyboard and mouse wireless, they no longer work. The computer says that they are beautiful, but they don't work! I'm not computer savy so please talk to me as tho I'm in kindergarten. Thank you

    Hi Louise,.

    1. you receive messages or error codes?

    2. did you of recent changes on the system?

    3. what version of Windows are you using?

    Perform the following methods and check if it helps.

    Method 1:

    Try to connect the keyboard and mouse to any other computer / or any other port and check if it works very well.

    Method 2:

    You can try to run the hardware troubleshooter and check if it helps.

    Convenience hardware store

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 3:

    You can also try to update the drivers for the keyboard and mouse.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    Method 4:

    You can also try to synchronize the device with the receiver again. Then try to reinsert the batteries. Also, look for the interference of signal from nearby electronic devices.

    Hope this information is useful.

  • Microsoft Wireless Optical Desktop 1000-keyboard and wireless mouse Combo does not

    Hello

    I use the 1000 desktop wireless for about 1 year now.

    Now the keyboard works intermittently and the mouse works almost not at all.

    • I get no error message at all.
    • I tried to replace the batteries too, but no luck there
    • I have replace the mouse & keyboard USB those...
    • The works of the mouse and keyboard not juicing!
    • I have all ports USB 8 occupied on my PC
    Is there a conflict of port here?
    Any help would be greatly appreciated

    Hello
    have you checked the Device Manager to find mistakes a yellow "!" or red ' x'
    http://support.Microsoft.com/kb/310560/ please click the checkbox as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

  • What is a good keyboard and wireless mouse to buy for my Pavilion m9600t desktop computer.

    The wireless Elite keyboard and mouse HP keep breaking down (I'm on my third), so I conclude that it is undesirable. What is good? Doesnt must be HP brand. And I don't want a shift caps lock on the keyboard.

    I use the Logitech Performance MX mouse, and I just bought the new K800 keyboard.

    That I highly recommend.

    Also have the K340 which is bit of a great keyboard.

    They all use the tiny unifying receiver. Excellent products.

    The mouse that I have 3 of them (one on each of my jobs) this is the best mouse I've ever used.

  • KDL-55W800B TV able to use the keyboard and wireless mouse?

    Hello

    I tried to plug in my mouse wireless & keyboard USB, but my TV KDL-55W800B showed that it does not support this feature! Can someone help me to solve it? Thank you very much!

    Hello

    Sorry for the late reply. Sony has not tested this accessories and we can not guarantee if these accessories will be worked on this Tv.

    If my post answered your question, please mark it as "accept as a Solution.

    Thank you

    Dave

  • try reinstalling Microsoft keyboard and wireless mouse 1000 on another computer.

    I have successfully used the keyboard or the mouse on another computer.  This time my computer recognizes the receiver, but I can't get the keyboard/mouse to synchronize with the computer.  I am running Windows XP.  Thank you in advance for your help!

    Hello hiring,

    Thank you for your message.  You may need to consult the manual for these devices, but there is probably a connection button on both devices that put into a discovery mode.  Have you already tried that?
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Keyboard and wireless mouse freeze after wake up

    I had a lot of trouble when my computer goes int mode 'sleep' lately. After waking from sleep mode my mouse and keyboard do not work and the cursor is frozen. What could be the problem? I saw a fix for problems similar to this usb. Are their all the dangers of this fix and it's the only thing to try?

    My system is windows vista Home Premium 64-bit.

    Hello djmechanic,

    Thanks for the return of the response.  Because he was working for you recently, I suggest to try to perform a system restore.  Did you by chance change anything with your computer before having this problem?  All new software/hardware installed or new Windows updates?

    What is system restore?

    Please let us know status.

    Thank you

    James

  • Keyboard and magic mouse

    How long does take to recharge the mouse and keyboard, never done before. I have a 21.5-inch iMac, with keyboard and wireless mouse. Thank you very much...

    Depends on how long the batteries are discharged. Maybe an hour for the keyboard and a littles less for the mouse.

    You can connect the Lightening cable to the USB port and then to the keyboard or the mouse and use the devices while they are in charge.

    Recharge the battery in your Apple - Apple Support accessory

  • X 3000 wireless mouse: scroll doesn't work is not on the X 3000 wireless mouse

    Hello. My HP Wireless Mouse X 3000 is difficult to scroll down. I have to turn this small wheel very quickly, until I get at least scroll. It is connected by using the provided USB wireless receiver box. I tried on two PC with USB 2.0 and 3.0. The same problem. What can I do?

    Hi there @anduble,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your mouse's scroll wheel function in Windows 10.

    Try using the HP Support Assistant, if you have not already, to search for updated drivers if available.
    HP computers - using HP Support Assistant (Windows 10, 8, 7)
    HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

    So if you are still having the same problem, try this page: HP PC - keyboard and wireless mouse troubleshooting.

    Don't forget to check your mouse settings in Windows 10.  Select (left-click) start button, and then select settings > then peripheral.  Then select the mouse & touchpad in the list on the left side. You can make adjustments to the scroll wheel function in the options avauilable and link options mouse with dubbing .

    Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

Maybe you are looking for

  • HP Z820 - BIOS 02.55 rev A - SSD on LSI SAS 2308 do not start... "Non-system disk...". »

    Hello MY Z820 workstation is equipped with an Intel 520 240 GB SSD as boot drive, on the integrated LSI SAS 2308 controller. It is a GPT disk. I just tried to update my BIOS Rev 02.08 Z820. at 02.55 a. rev. The update succeeded, and in the BIOS, I ch

  • problem 2G Milestone XT720 United States

    Hello world. I just bought milestone XT 720 unlocked of the France. I thought that it could be used 2 G with At & t in the United States. (I know that it cannot be used with At & t 3 G in the United States) However, I can not access 2G now. If someon

  • ThinkPad Helix - down does not work

    The gesture of "sweeping down from the top" does not work in any application of metro/modern Windows 8. Can I close an application by dragging it down with the mouse, but sliding down with my finger on the screen does nothing. Anyone else experienced

  • Bought an update disk thinking it was the complete system.

    I bought a windows disk thought 7 it is the full operating system, I have not followed the instructions properly or made a mistake somewere along the way during Assembly and have now lost my Vista the operating system completely. I still have the pro

  • My cd/dvd drive stop working.

    I have vista and I went to rip a cd and it says to install a cd player. In addition, the discs (CDs and DVDs) are not listed under drives in the computer. I have something to turn off somehow?


HashFlare