HP L7780 all-in-one stops abruptly print cyan ink - would - this software problem?


Yes, I think that the print head is the cause. You try to run a few times to see if you can lead it.

If you want to keep the other cartridge, put it in a lock back zip and place it in the refrigerator.

Good luck

Kyle

Tags: HP Printers

Similar Questions

  • Photosmart premium 3-all-in-one does not print black ink

    My C310 series 3-all-in-one hp photosmart print no black ink on the page.  The cartridge is new, and all ink cartridges are full.  The printer is 3 years, just one month out of warranty.  I downloaded all the updates, I'm sure and went to the website of hp troubleshooting page.  I followed all directions, twice and still no black printing.  Please help, I don't want to buy a new printer!

    Under Tools, I see only "Clean cartridges" not "clean print head."

    When I chose "Clean cartridges" twice, black ink printed!  Hooray! Once I have this post, hopefully get back to the page to say the problem is "solved"!

    Oh, while I have you on the line, while the cartridges were being cleaned, I got a message saying that I had to download the latest hp drivers, because those I have is not compatible with this version of Windows.  However, I download the latest drivers for 8.1 from your web site when I had a terrible paper jam.  After that I downloaded the latest drivers, this problem has been resolved.  But, given that I get this message re incompatibility, I need to re-download?  It was only a couple of weeks (up to three) that I downloaded the drivers.

    Thank you once again!

  • HP Officejet 4620 e-all-in-one stop wireless print whenever it is turned off

    My HP 4620 stop wireless print whenever it is turned off, although it is connected to the network (by the results of the test network wireless, pass & the quality of the signal is excellent).  No troubleshooting - HP Print & Scan Doctor work there is no help, I have to uninstall & reinstall the printer each time to be able to print wireless again.

    I use it on/on button to turn the printer off, don't disconnect not.

    Please help, or I need to return to the store, this is the third time!

    I also had the same issue and after a few game it seemed to have fixed so here's what I did... Hope this helps someone else.

    -My printer is connected to my wireless network.

    -On my computer that I'm connected to the printer through the IP address 192.168.1.153... (Yours may vary) in a browser

    * You can find the ip address printers on the control panel of the printers by pushing the wireless button and pushing the ok option 1, it should appear with the intensity of the signal and the ip address is at the bottom.

    -Once I was on the Printers page in my browser, I went to the tab network at the top.

    -Then to Internet Printing Protocol section (on the left in the advanced settings)

    -On my own PPI was already on, but the location was empty I put a '1' in the location box and then applied settings.

    -C' is the only thing that I changed and now my printer is asleep as always, but when I print something from my iphone, mac or pc it wakes up and prints as it is supposed to!

    BTW before I went to the printer via the browser. I changed layout sleep in 15 minutes via the Control Panel on the printer itself, don't know if it helped the issue or not because I still had the problem of sleep after I set the timer to 15 minutes instead of 5 min. But I solved my problem after performing the steps above!

    Also note that on the one hand some ppl on here say it's a network problem or a router! This is NOT the case I never even tried these roads and I solved my problem only by changing the setting of the printer! I have not set a static ip address or something like that!  The above steps is things ONLY I touched and my problem is SOLVED!

    Router: NETGEAR AT & T 7550 wireless router/dsl Modem

    -Security: WPA2-PSK (AES)

    -Printer connected to the router via WPS (push button configuration)

    Printer: HP Officejet 4620e all-in-one

    Computer: Apple iMac OS X Version (connected to the network via wifi) 10.7.5

    Dell running Windows 7 server (connected to the network via wifi)

    Apple iPhone 4S (connected to the network via wifi)

  • HP 6812 All In One: stop a print session

    How to stop a print job while it is printing? Recently, I've printed 20 unnecessary pages.

    Sherrodwaterboy

    Hello;

    Let me welcome you on the HP forums!

    I read your message want to kill a print in Win10 job and wanted to help.

    Here are the instructions: http://www.dummies.com/how-to/content/how-to-cancel-a-print-job-in-windows-10.html

    Good luck
    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    If my post helped you, please click on the thumbs-up symbol to say thank you.
    If my posts resolved your issue please click "accept as a Solution.
    ========================================================================

  • OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

    Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

    Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

    Thought I would give it another chance: I've done the following:

    Ran L4uninstall.bat

    American ran Care System: registry clean and disk cleanup

    Connected accessories/tools disk cleaning system

    Restarted

    Insured that lates version of Adobe Flash Player has been installed

    Latest version of the software downloaded to the printer

    Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

    Restarted

    A ran another check of the register with the American healthcare system

    Ran disk clean again

    Off DSL modem

    Firewall and AntiVirus disabled Norton

    Restarted

    At installation of the printer as follows: first of all installed drivers

    Restarted

    A ran the remaining printer one by one with Solution Center last softerware

    Restarted

    Is surprised that Solution Center has worked without problem

  • L7780 All in One – Windows 7 Clean install - error when printing

    I have a huge problem with a failry new L7780 all-in-one. I has stopped printing from my laptop. I have recently upgraded to Windows 7 with a clean install of Vista... ergo I formatted the drive and reinstalled Windows 7. And now every time I print I get the following message "the job failed because of an error on the printing system.

    The printer is selected by default.

    The printer connects wireless on my network and appears on my connected PC. However, once I press print after a few seconds it seems to disappear.

    I did change all network settings and the MAC address is off on my router. It worked well on 2 home pc running XP, worked fine with Vista. And its only present a laptop with Windows 7 that cannot print on it for some reason any.

    However, sometimes when I stop... all of a sudden it prints what I asked 30 minutes ago.

    I tried the drivers installed and reinstalling.

    I tried forced start-up.

    Stop at the outlet.

    Reset the network adapter.

    I can only think at this stage there is a compatibility issue with Windows 7.

    Clues? Any help anyone can offer.

    See you soon,.

    Steve

    If it looks like your question:

    After you install the product on a network, you turn off the computer, and then, and the product loses functionality. The product is no longer prints and disappears from the icon of the product in the menu devices and printers in Windows 7 (64-bit).

    Try this fix:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-89191-1&LC=en&DLC=en&CC=US&OS=4063&Product=4022343&sw_lang=

  • Installation of the HP Officejet Pro L7780 all-in-One

    HP Officejet Pro L7780 all-in-One

    Windows 7 64 bit

    Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

    I run the program "to add a series of all-in-one Officejet Pro unit

    I chose the wireless connection

    The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

    He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

    I ran the install several times (also after restart the printer and the computer) moved always

    The connection of printers is configured properly, to the best of my knowledge.

    It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

    I have no idea what to do...

    Hi RazorkillerC,

    You can scan from the HP software successfully?

    1. open the Solution Center, and then select settings

    2. select scan settings

    3. delete the shortcuts on the right side

    4. click on the device to update, and then close the scan window

    5. open again the scan window

    6. add shortcuts on the left side to the right side

    7. click on the device to update

    8. try scan from the front panel of the printer

  • PR HP's all-in-one Deskjet F4172: printer all-in-one Deskjet F4172 HP and compatibility window 10

    Madam/Sir,
    With respect, I have printer all-in-one HP Deskjet F4172, I ask you this question if my mentioned HP printer will be compatible with window 10 by 'July 29, 2015' 10 window will be upgraded, please? and how I am able to get the software and drivers, please?

    I just use Google.

    http://support.HP.com/us-en/product/HP-DeskJet-F4100-all-in-one-printer-series/3177560/model/3341350

  • My Officejet 6500 E709 all in one will not print black.

    My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

    Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

    Hope this helps you with your problem.

  • My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

    My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

    Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

    new PC using Windows 7 until recently.

    Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

    Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

    This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

    Gordon,

    Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

    then buy a new one.

    It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

    But don't thank you for the reply... even if it was a joke!

  • HP C4280 all-in-One will not print photos on any HP photo paper

    HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

    Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

  • HP 1315xi all in one will not print.

    Recently had to wipe my hard drive and reinstall everything.  I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.

    I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site.  After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print.  It will scan and copy, but not reading as a printer.

    Help, please.

    Hello althor1170

    It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?

  • My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

    My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

    Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

  • -What is the HP Officejet 7310 all in one able to print wireless

    -What is the HP Officejet 7310 all in one able to print wireless

    What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

    C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

    Message: Script error...

    OK if you use IE9 32-bit

    Latest version of the driver from HPupdate

    Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

    Hello borisgit,

    As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

    Script error when you try to print from Internet Explorer 9

Maybe you are looking for

  • Sierra + Magic Trackpad 2 = Force click with a single finger no longer works

    Since the upgrade to Sierra, did someone else, difficulties with the Magic Trackpad 2 and using the force click to pull up definitions? If I turn it back to "tap with three fingers," it works, but is not the "click with one finger. In fact, I'm not s

  • When the HD 5650 graphics drivers will be updated?

    Where can we get an update on the graphics drivers for HD 5650? StarCraft 2 does not recognize my grahpics card. I can play the game, but some graphics settings are forced low, as the effects of lightning...

  • HP Deskjet 5850: The HP Deskjet 5850 unreliable paper feeding

    Hello - my printer (which although old has had a relatively easy life) always moves the paper slightly squint (I can live with that) and often needs help to pick up at all (I just can't live with it). The current document is paper HP Everyday. Is the

  • Windows 8 support

    If you want to learn the basics of using Windows 8, HP has a support topic that addresses exactly this. The topics included are: Getting started with Windows 8 Learn how to use the new interface to start, charm Bar and gestures Printing from Windows

  • How to change the existing terminals 'view as an icon' to view data by program type

    I had a few LabVIEW code inherited from someone else. And there are tons of existing terminals, displayed as an icon. Is it possible to batch process to change all of display them as data type? Thank you very much!