HP laptop 15: Start Hp logo appears

Similar Questions

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• laptop HP probook 4540 s: hp probook 4540 s freeze on start hp logo

  Hello! My hp Probook s 4540 won't start. only the HP logo appears on the screen and that's all, nothing more and system unbootable. I have install hp diagonistic UEFI & then then when I reboot, this problem started. I cheak my hdd & memory. But it's work clearly. I also put a new hard drive & now I install windows on it. It works normally so far. I already update my bios F60. My specs are: Professional Windows 7 64, CPU Intel core i5, 4 GB ram, HDD 1 TB of toshiba, Intel HD Graphics 4000.

  I am successful to solve this problem. I just reset the cmos & reinstall windows.
  Thank you.

• Acer logo appears 2 times then starts windows.

  Hi entire community of Acer.
  I recently bought an Acer S670MG or computer M679G of office with the following specifications.
  Processor Intel core 2 due 3.1 ghz. 6 MB of L2 cache.
  6 GB of ram ddr3 to bus 1066 mhz
  NVIDIA Geforce 9800GT 512 MB/256bits external graphics card.
  WD 1 TB SATA hard drive.
  and I faced a problem that when I turned ON computer it beeps Acer Empowering People appears a few seconds then display has disappeared. then after cutting seconds, once again beeps sounds and new Acer logo appears, and then starts windows. can someone help me why this happens. because of this, boot time is much longer.
  P. in the bios. I tried both modes of hard drive. RAID and native ide. in third place is AHCI, I think that I have not yet tried.
  Help, please.
  BIOS. energy or American mega trend.
  Windows 7 Ultimate 64 bit SP1.

  A link to all of the troubleshooting you have already done here:

  http://www.SevenForums.com/hardware-devices/293189-Acer-logo-appears-2-times-then-starts-Windows.htm...

  Problem seems to be resolved by applying this thread.

• Once I turn on my dell inspiron laptop 1545 dell logo appears and then the screen goes black

  Let me start by saying: I had similar problems before, but none of the usual works.  The other day, these two Windows Update kept popping up and wouldn't go away so I clicked finally allow.  Then the next day that I was on the internet and my computer froze, I tried to turn it off and it wouldn't if I pressed the power button until it did.  Then when I turned it back after the dell logo appeared all that I had a black screen with a cursor in the upper left.  I ran diagnostics and startup repair and nothing.  I tried to do the restore of the system once in couple with different points and nothing, I still get the black screen after dell logo.  Is there another way outside the reinstallation of the operating system, to fix (because I really don't want to lose everything I have on my computer - and no I don't save it anywhere)?

  You can reinstall the OS without formatting the drive, all of your data in a folder named windows.old. You will need the Dell Windows Vista disc however.

  Follow my guide here: http://en.community.dell.com/support-forums/software-os/w/microsoft_os/1434.aspx
  Start with step 3. (require reinstalling Dell DVD). Skip step 5 continue on step 6 to step 7. Install Service Pack 1 and Service Pack 2 (autonomous probably 32-bit) and stand-alone Internet Explorer 9. You must download these in step 4 with the system drivers as described (probably, use another computer and use a USB drive). Install the drivers as mentioned system. Activation should be useless since you use the Dell DVD in a BIOs Dell. At the stage. 12 use the automated to retrieve documents from Windows.old. Make sure you have everything and then delete windows.old.

• Laptop computer start-up with a white screen

  Every morning now when I start my laptop, it always to start and stay on a blank black screen.

  I held down the power to turn the machine off, then turn on again so that it lights correctly so I can see anything.

  It happened for about a week now. Help, please!

  Hi Julcoh05,

  ·         Did you do changes on the computer before the show?

  You can check the following items and check if the problem still persists.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

   

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Hope this information helps.

• Satellite P200-140 - Toshiba Logo appears for a few seconds, then disappears

  I have a problem simular with a P200-140.

  When he starts the Toshiba Logo appears for a few seconds, then disappears, if I tilt the screen I can see that the image is there but the screen does not light.

  I used my projector SVGA output and which works very well. Sometimes after having started a few times the display returns and will then work fine but disappear again without warning especially if yiou closes the screen.

  I don't know if it's maybe a switch problem?
  Y at - it a contact microphone that could stick when you close the lid?

  I tried deleting and reinstalling display drivers and booting in safe mode, neither makes the difference.

  Hi Mortiss,
  Maybe the backlight of the lcd screen went... (I don't think)
  or broken wires... (!)
  or the lid switch is defectiv (rare)

  ask a servicepartner to help...

  deassemble unity... or watch this will kill your warranty...

• I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I did a reboot, nothing has changed.

  so the music app is an application by default/standard, it cannot be removed or reloaded.

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• During the starting process windows appears, then all is empty

  Sometimes when I turn on my laptop it shows the windows screen and then it turns off. also, the hard drive light stops flickering.

  I have to restart. This happens 2 or 3 times and then the laptop will start normally. No disc error or scan message.

  In addition, even after I've logged in the screen turns off and the system stops working altogether. I have to manually switch and turn it back on. Yet once, no disk or scan error message does. I ran Toshiba diagnostics and everything seems to be working well according to it.

  Hi dude

  First of all, it would be very nice to know what model of laptop you have. This info is much appreciated.

  My first thought was a hardware malfunction. Maybe something wrong with the HARD drive. But in my opinion, you should first check if the same would happen after the healing of the BONE.
  Try to recover the laptop with the delivered Toshiba Recovery CD and check the functionality of the laptop after this procedure.

  See you later ;)

• Bike logo appeared all to itself.

  I have uninstall some app, motorcycle logo appeared suddenly (as one during startup) for a minute and restored screen back to normal. Is this something normal or something really to worry?

  Don't think...

  Well, which may be due to this app...

  Because I had faced it as well during the uninstallation of an application and I realized it was just because of this app only e motorcycle has flashed logo...

  Do not worry...

  See you soon...

• My laptop just starts correctly.

  My laptop just starts correctly.  It turns on and just asked me to choose one of two options to restart Windows, which does not produce anything other than, at best, the bar of Microsoft and the bottom of the screen, or, at worst, a black screen.
  Please can someone help me?  I have no knowledge of true computer beyond that of an ordinary user of internet etc.
  Big thank you to anyone who can help me.
  Marty

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I disable the onion? every time I start Internet onion appears, what should I do to turn it off?

  How can I disable the onion? every time I start Internet onion appears, what should I do to turn it off?

  ·       Click Start on your desktop
  ·       Type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  Go to the Startup tab, locate Internet onion and uncheck the box to open at startup.

  I could also go into Panel, programs and features and see if you can uninstall Internet onion.

  Thank you

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.