HP laptop G72: Battery only charge while turned off.

Similar Questions

• BlackBerry Smartphones BB Bold only charges when turned off

  Hi all

  I have a BB "BOLD" for a few weeks now.  When I plug it into the charger, it does not seem to load when the device is on.  The loading symbol appears in the upper left corner, but if I unplug the device after a period of time, the battery status symbol doesn't seem like the unit is charged.  In addition, the light yellow of load not flach when plugged in when turned on.

  When I switch off the unit and plug it in, I get the charging flashing yellow light and accusations of pretty good device.

  I also tried it with the device is plugged into the USB port on my laptop (I have DeskTop Manager 4.7), and it does not seem to load there either, although I have not tried to load from the PC the unit is turned off.

  It is a real problem, as very often, I want to load the device then turned, while I do miss phone calls and emails.

  Thank you.

  Adam

  The battery on the top icon left not enough resolution to be used for something other than a general indication of charge level.

  Go to Options, State to see the level of charge of the battery percentage.

  When I have my camera on during loading, I do not see the battery flashing yellow light. In fact, I didn't "BOLD" had one of these!

  In any case, see if the percentage level changes during loading with the appliance on.

• When I unplug my laptop - even if the battery is charged - it turns off immediately

  I have a laptop HP pavilion with windows vista.  The fine battery charges but when I have a connect the power to the computer will stop immediately.  What can I do?

  Hello CorySchneider,

  In addition to commentary of Veritas Aequitas, I suggest trying a diagnostic test, assuming that HP has one installed.  Who would check usually software and hardware.  Including battery, to see if it is bad.  Have you ever replaced the battery before?

  Fix the battery issues:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

• Y50 - 70 touch only charges when turned off

  My Y50-70 will only touch and detect the power adapter when it is stopped. When on and running, he acts as the power adapter is not plugged at all. When shut down, it charges the battery and the light indicates its charge but when its on and running it does not detect the power cable at all. I just wanted to know where begin to solve the problem. Its executing 10 windows, was 8.1 Windows

  The PSU was the problem, just in case someone already has this problem!

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

• Why has my laptop started to randomly stop before turning off

  Original title: computer power questions

  Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check with these utilities to see if information may be collected: BlueScreenView run to see if
  There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
  seconds before) see the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  =========================================
  =========================================

  More if needed and you think that the closure could related to the Options of food or sleep.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I click on Akamai Download Manager says of the window which opens, "413 header length too large."  How can I fix? I am running Windows 8 on a laptop computer and that you have turned off my pop ups.

  When I click on Akamai Download Manager says of the window which opens, "413 header length too large."  How can I fix? I am running Windows 8 on a laptop computer and that you have turned off my pop ups.

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

• Satellite U400 - battery only charge if the laptop is turned off

  When I plug in charge he only charged but when I turn of laptop battery is in charge.
  So he allways using the battery.

  What should do?

  Hello!

  What Satellite laptop do you have?

  At the moment, I can t say what the reason is for this. Maybe you should try to update the BIOS that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In the worst case, it s a malfunction of the motherboard and it should be replaced :(

  Good bye

• Laptop battery only charges to 79%. Think I've changed the settings earlier to save the battery of thea, but now want to 100% load again.

  My laptop battery is ok, but still only charge up to 79%. And stop there. What should do? I changed the settings as soon as possible to save the battery, but now wants to load 100% again. I can't find where to change them back.

  If you start in System Setup (BIOS) - before any loading of the operating system - and look at the section health and charge battery... What percentage watch battery is charged it?  What status?  If leave you it in the BIOS and let it load this way - it's 100% top?  If so - what happens when you start in Windows?

  (Trying to confirm this, it is an error within the OS and not a hardware problem).

• Why my battery only charges to 76%?

  I have a laptop Gateway NV53A I bought a year ago and the battery charge up to 76%. The light on my computer not display blue more that it's always red.

  Question (or 'Test'): turn on the laptop, but instead start in Windows, go into the settings 'system BIOS.  To do this, turn off the laptop and when you turn it on - gave is a gateway - start by pressing "F2" on the keypad once per second.  That should put you in THE system BIOS.

  See if there is a section in the BIOS for your battery - saying wewillgive health and the current load on the battery.

  Remain in the BIOS on this system for an hour with plugged into the power supply.

  Your battery levy?

  Start Windows and refer to the web site for download to support and drivers Gateway and locate your exact model laptop and download the latest motherboard chipset drivers and install them.

  Batteries last between one and two years currently in laptops given how many people use them.  (Many people leave the battery in the machine all the time, completely busy and currently in use, but connected.)

• Pavilion 15 laptop: Start button / stop does not turn off

  After the upgrade to windows 10, "sleep" mode did not work, however a windows update corrects this problem. The only problem I have seen today is that when I stopped my laptop the power button stays on your battery and I have to manually turn off (by pressing for 5 seconds).  What I do is turn on the computer again and stop it again, and then it turns off completely. I m afraid that force close down may harm the computer.  As info... I bought my laptop this year, came with windows 8.1.  Any help? Thanks in advance.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
     • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
     • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
     • In Control Panel, select administrative tools, and open Services.
     • Go to Windows Update and double-click it to view its properties.
     • Click on stop to stop the service to run.
     • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
     • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• spectrum x 360: battery - spectrum x 360 turns off 8%

  I bought a convertible of spectrum x 360 at the end of Thanksgiving this past November 2015. As I use the machine for several months now I have noticed that it turns off when the battery exactly reached 8% of remaining power. Is it possible to let it flow to zero and told me just to say 5% compared to the ways in which he warns me currently to 15.12 & 10% remaining battery?

  Also, just to clarify, I read on the microsoft Web site related to the life of the battery it is recommended to you to Miss completely before charging again, as obbosed to say let it flow to 50% and full charge battery. Is this OK make the most of performance and autonomy? I do not consider this when buying, but the battery in the spectrum can be replaced in the windows store?

  Thank you for your time and your consideration.

  Hello

  Please use the following article to configure your machine:

  http://www.howtogeek.com/224501/how-to-improve-battery-life-with-Windows-10s-new-power-settings/

  Kind regards.

• Envy laptop: my notebook of envy not turn off when I stopped in Windows 10?

  Hi all

  I tried everything to get my HP laptop work properly.  I am a computer programmer and my laptop not stop using the power HP power and sleep, using Windows 10.  I have to update the display driver, I tried different settings in the HP power settings and still no luck.  I have never seen anything like this before.  All my drivers are updated etc.  I'm about to give this thing!  When I select my phone stop Windows 10, should close and doesn't have the power button / light on.  When I try to go back on my laptop, it is dead and I hold the power button for about a minute before it turns off so I can restart the laptop?

  Thank you

  Mark

  Hi Mark,

  You've already tried this, but if not, it's definitely worth it.

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• computer guard install an update while turning off

  When I turn off my computer, Windows is to install an update, but it retains "installation", for hours, the computer is not turned off. Problem: I can not turn off my computer properly, unless I use the "start/stop" - button and I can't install the update. These two problems cause my computer runs much more slowly.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  If you could answer a few questions that would help us resolve this problem:
  1. What is the number of KB updates?
  2. do you get an error message?
  3. don't you make changes to the computer before the show?
   
  You can access the interface from Windows Update Update by typing in the search box of the "Start" menu, then on "Windows Update" in the results.
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Reset windows update components and then try to install the updates and see if the installation is complete. Open the link below and click on the cue, he touches.
  http://support.Microsoft.com/kb/971058

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

   
  Method 2:
  Try to download and install the updates manually. Visit the link and enter the KB number for updates and download the same.
  http://www.Microsoft.com/downloads/en/default.aspx

  Method 3:

  Try the steps from the link below.
  http://support.Microsoft.com/kb/822798

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Back up your files before you begin reinstalling Windows 7 if possible, even if you have reinstalled Windows 7 on a hard disk partition, and you have personal files on another partition. For example, if you have encrypted files, you will not be able to access them after reinstalling Windows. A custom installation replaces the current version of Windows 7 and all personal files.

   
  I hope this helps.