HP laptop: laptop has changed before the purchase date files

Similar Questions

• How to change the setting of the Siebns.dat file

  Hi all
  
  Can change us the Siebns.dat file?
  If Yes, then what is the procedure to do?
  
  I thing some command is available for this.
  
  Some body can help me in this.
  
  
  Thanks in advance
  
  Remy

  You can type help to list the usual orders, or refer to shelf Siebel System Administration Guide >
  Using the Siebel Server Manager command-line Interface.
  http://download.Oracle.com/docs/CD/B40099_02/books/SystAdm/SystAdm_SrvrMgrCLI.html

  If you would like more information, let me know what you want to do, and I'll do my best to help
  Best regards
  EvtLogLvl

• I have toshiba laptop that missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all the other themes are greyed out so you cannot select them,

  I have toshiba laptop missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all other themes are greyed out so you cannot select them, my internet has also stoped working, I also can't do a system restore as it says it does not work any body can help me please?

  My laptop will also not me do a backup.

  Try these:
  METHOD 1:
  Back up all the files on a USB Flash drive or an external hard drive and re - install Windows on the hard disk of laptop.
  -------------------------------------------------------------
  METHOD 2:

  Try partitioning your hard drive and put your files there.

  1. Start menu search: 'drive '.
  2. click on create and format hard disk partitions
  3 right-click the Local Disk (C) and select shrink.
  4. According to the size of the files, we could save, choose the size you want to reduce (1000 MB = 1 GB)
  5. right click on the new "unallocated space" and create the Partition. (Name it BACKUP or something)
  6. place all your important files on the new partition, and then, when you reinstall Windows, select the Local Disk (C)
  DO NOT select the Partition you you saved on files.
  Hope that these answers are useful.

• I recently updated my computer (the thing has changed since the problem) and now my LAN is enabled at startup, even if I turn it off before you stop. Why? And how can I stop this?

  Since my last update, that is the only thing changed on my computer since it began, my lan port is always on at the start of Vista (Ultimate).   I'm on a laptop that has a LAN on board.  I have not had this problem NEVER before and have owned the laptop for about two years now.    The only thing that has changed on the computer's windows updates.

  I spent the length of a deactivation of the adapter before you turn off the laptop and tried to load a page that is not in the temporary memory, and get the usual page cannot be displayed.  I scanned for virus using AVG and Bell Internet Security scanner online McAfee.   I also ran Windows MSRT and found nothing unusual.   I also checked to see if the BIOS has been changed somehow, and nothing has changed.   Boot to LAN is disabled.   So I can only conclude that I have a virus has not been detected (but have no slowdowns or anything different in the security under gpedit.msc logs), or the more recent Windows Update changed some settings.

  But weak and this is every time I start up the computer from the local network is enabled.   If I let the cable disconnected at startup, it does not reconnect to the modem cable after rehabilitation and I have to disable and then re-enable the LAN to access the internet.

  Please let me know if anyone else has this problem or have heard of this and know a solution.

  Thank you.

  Leqs D.

  Hi Lequarius,

  ·          You receive an error message when you restart?

  Method 1

  I suggest that you download and install the updated drivers for the network adapter on the computer by visiting the card manufacturer or computer manufacturer website manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I would suggest that temporary you disable the security software installed on the computer and check if the problem persists.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

• When I connect to Windows 7 after that my laptop has been asleep, the Welcome screen will have 10 minutes to go beyond.

  When I connect to Windows 7 after my laptop has been asleep, the Welcome screen will block for always (10 + minutes). It does not every time, but maybe once all 5 or 6 times and it's happened lately. I can just shut the computer off and the newspaper with no problem after starting it upward, but I'm afraid, there may come a time where it does not work.

  I had this problem since I got my computer 2 months ago so I don't think it's related to what I have installed. Has anyone else encountered this problem and has found a way to fix it? Is this a common bug in all of Windows 7?

  original title: Windows 7 stuck on the Welcome screen

  Hello

  Safe mode - repeatedly, press F8 as you bootup. Another method is to start - type in
  Search-> find MSCONFIG in top box - just right-click on it - RUN AS Admin Startup tab
  -check the Safe Boot (network) APPLY / OK. Don't forget to change it if necessary.

  Try a system restore before what happened: (you can run system restore
  in the Windows as well however it sometimes works better in safe mode-
  repeatedly press F8 as you start.)

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ==========================================

  If it is mounted on the homescreen?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  
  ======================================

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Laptop has frozen on the download of the Update step 3 of 3, but never goes beyond 0%

  Original title: download freezes

  My laptop has frozen on the installation of your last update - when you switch on it says download stage 3 of 3, but never moves beyond 0%.  I tried your advice on restarting in safe mode but still the same thing, then toggle, light up again and continues in a loop!

  Hi NathanielPortland,

  Method 1:

  You can read the following article and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Method 2: When you're able to start normally, check the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Method 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• Virtual disk parent has changed since the child was created.

  I recently had one of my virtual machines go down and I couldn't connect to access anything whatsoever, so I rode as an extra hard drive to another virtual machine in order to access the data I needed.

  Once I had finished I he took off the other VM and proceeds to the power on the virtual machine, but I got an error of:

  "The virtual disk parent has been changed since the child was created." The content of the virtual disk ID parent does not match the ID of parent matching the child content. »

  Reason: The virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent matching the child content.
  Cannot open disk ' / vmfs/volumes/4e24c6fe-3c2ad61e-a57c-e4115bbbce6c/SNCTrillium/SNCTrillium-000003.vmdk' or one of the snapshot disks it depends on.

  I read upward through the knowledge base of VMWare on the modified files, but I've never had to do that before and I'm not sure about how to go on this subject as I've never used the vsphere CLI either.

  I am currently using ESXi 5.0.0 with vsphere client 5.0.0. I've attached a screenshot of the error.

  According to the snapshot between SNCTrillium - 000001.vmdk and the basic disk SNCTrillium.vmdk is broken, which means that the basic disk has been changed. I have attached an instant replacement for the SNCTrillium - 000001.vmdk with a fixed string that should allow you to open the virtual machine. However, since I do not know what and how much data has changed on the basic disk, I can't tell you how much data corruption, you will see. So you better take an another snapshot to be temporary once loading hard file attached, in order to ensure the current hard data files cannot be changed.

  André

• HPCM error - definition model has changed since the last calculation

  Hello world
  
  I have a bit of a problem on an application Coordinator.
  
  (1) message warning when I go to balancing-> "model has changed since the last calculation."
  (2) message when I select cube considered in balancing-> 'the database has not been updated with the latest results of calculation."
  
  What has been done before I got to this point:
  
  (1) add a few lev 0 members in the current hierarchy for cost center
  (2) run a comparison to check if they are picked up (OK!)
  3) deploy EPMA (result: SUCCESSFUL message)
  4) go to HPCM and deploy the two cubes (OK-> at least is what the status of the job)
  (5) control of new members in OTL (OK! they are there)
  (6) the HPCM Calc launch, check the box to erase all data of calc prev, check the box to regenerate calcs, check the box to transfer data to the reporting cube.
  result: employment status: OK!
  
  But in reality: never got transferred through to the reporting cube.
  
  I repeated steps 1 through 6, a few times, I even changed something in the (alias) shared library to check if it went through.
  In EPMA it says that the app is 'in sync with the deployment. And when I run a comparison with deployed application, it does not pick up anything.
  
  Any ideas?
  
  Thank you
  
  Kind regards
  Annie

  Hello world

  Just realised I never came back with the answer to my question. I was developing the new application and starts the compilation of the Calc sequentially, so while I was developing Calc for step 2 or 3, rebuild only those scripts are calculate only the specific areas. This is the reason why I received this message. As soon as I transferred both apps and recalculated at the beginning, the error message disappeared.
  Just in case someone wondered.

  See you soon,.
  Annie

• the identification has changed to the CHRC... what it means?

  The icon for Mozilla Firefox has been reading of Mozilla Firefox, but now it shows the CHRC... what it means, what it is and why it was changed?

  The text under your Firefox on the Windows desktop icon has changed to the CHRC...? I think that you can rename it to whatever you want, but I see no reason for this change on its own.

  Could you do a right click and take a look at properties? You expect to see a 'target' like "C:\Program Files\Mozilla Firefox\firefox.exe" Summary anything here?

• The screen of my Hotmail has changed. The box of Firefox at the top has disappeared. It has nothling I can click to get back to my desktop screen.

  The screen of my Hotmail has changed. The box of Firefox at the top left is gone. I don't see anything that I can click out of Hotmail and return to my office.

  Hello

  You are able to use Hotmail without any problem on Internet Explorer?

  You will need to contact Hotmail support team or firefox support team for assistance on this. Usually, you get a disconnection of the option on the upper right of the browser window to sign out of Hotmail.

• Streets & Trips has expired before the date of the trial.

  Streets & trips has expired before the date of the trial

  Hello

  I suggest you post your questions on the forum of Streets and Trips is here:
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• The virtual disk parent has changed since the child was created

  Hi all, need your help with this one.

  I deleted two snapshots and now I can not start the virtual machine.

  Get the following error:

  Reason: The virtual disk parent has changed since the child was created.
  Cannot open disk ' / vmfs/volumes/4c483d34-a8c778c4-46a5-001cc460f09e/WEBPDXXXY/WEBPDXXXY_1-000003.vmdk' or one of the snapshot disks it depends on.

  I tried that link but still did not work KB: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 1007969

  I can still see the WEBPDXXXY_1 - 000003.vmdk, WEBPDXXXY_1 - 000002.vmdk and WEBPDXXXY_1 - 000001.vmdk when I browse the data store.

  WEBPDXXXY_1 - 000003.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 59fab513
  parentCID = a4a63bd5
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000002.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDWEBPDXXXY_1-000003 - delta.vmdk.

  # The database disk
  #DDB

  WEBPDXXXY_1 - 000002.vmdk
  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = a4a63bd5
  parentCID = 0f8995f3
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000001.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000002 - delta.vmdk.

  # The database disk
  #DDB

  DDB. Deletable = 'true '.
  ddb.longContentID = "ab1b7008e386c884ae920930a4a63bd5".

  WEBPDXXXY_1 - 000001.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 0f8995f3
  parentCID = 926f96fa
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000001 - delta.vmdk.

  # The database disk
  #DDB

  ddb.longContentID = "0336846d9f849b4b97ad028f0f8995f3".
  DDB. Deletable = 'true '.

  WEBPDXXXY_1.VMDK

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.

  CID = 926f96fa

  parentCID = ffffffff
  isNativeSnapshot = 'no '.
  createType = "vmfsRawDeviceMap."

  # Description of the measure
  RW 209715200 VMFSRDM ' WEBPDXXXY_1 - rdm.vmdk '.

  # The database disk
  #DDB

  ddb.toolsVersion = "8295.
  ddb.adapterType = "free".
  DDB. Geometry.sectors = "63".
  DDB. Geometry.Heads = "255".
  DDB. Geometry.Cylinders = "13054.
  DDB. UUID = "60 00 C2 92 41 62 5 d 8f-10 59 12 60 53 0 to a8 94.
  ddb.longContentID = "b204c5bc523bbc83c01dd3ed926f96fa".
  ddb.virtualHWVersion = "7".
  DDB. Deletable = 'true '.

  Is there a chance to run ls-lisa from the command line (SSH) in the virtual machine folder and provide the output!

  I ask because I'm a little worried about the timestamp of the hard (May 2011). Depending on the size of the files in the snapshot, it seems that the second virtual disk is not really used by the guest operating system and we could come back manually (by editing the .vmx file) on the resized basic disk (100 GB compared to 75 GB for snapshots) without losing important data!

  If you want to revert manually,

  • delete the virtual machine of the inventory
  • backup and then edit the .vmx file (replace "WEBPDMAPPD_1 - 000003.vmdk" with "WEBPDMAPPD_1.vmdk")
  • Move 3 snapshots in a directory temporary sub
  • Add the virtual machine to inventory
  • create a new snapshot to prevent the current hard files to be modified
  • Turn on the virtual machine

  If everything works as expected, you can delete the snapshot files moved and remove the snapshot created in the Snapshot Manager again.

  André

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.

• Currency of the line has changed since the user interface has been made on creating

  Hi all
  
  I'm ' currency of the line has changed since the user interface has been made. " The key to the planned line was oracle.jbo.Key' error on create action. Use case is simple. He saw table and create a button. When I click the Create button, I get this error. Back button of the browser is never used.
  
  The strange thing is that I don't get this error when I run my application on your premises. However, after I had it deployed in real development environment, he started up this error and I do not get this error on other pages.
  
  JDeveloper Version: 11.1.2.2.0 (JSF 2.0)
  Weblogic Version development environment: 11.1.1.6
  
  Kind regards
  Anil

  Same question: do you have the correct version of the runtime ADF your server?

  Timo