HP Laser Jet P2055dn: Black spots on paper

Similar Questions

• Laser Jet MFP M125nw Pro: the paper is stuck inside the printer

  the paper is stuck inside the printer Laser Jet Pro MFP M125nw

  Did you follow the information from the HP web site?

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/document/c03921935/

• HP Laser Jet 3800 printer: black spots on HP 3800 verticals

  Hello

  I have a HP Laser Jet 3800 printer that has started having black smudgess on each print out.  I did all the cleaning, I can think.

  Now I think the replacement of the fuser or belt transport.

  Any suggestions?

  Please see image.  It is very important at the bottom back to the center of the page.  Thank you.

  

  It looks like a faulty black toner cartridge for me.

  If you open the printer and move the shutter, so you can see the drum in the black cartridge has a film of toner on it? (if so, you must replace it).

• Printer laser jet HP 1109: all HP laser jet printers accept sticker paper?

  I am a ceramic artist and want to know if the HP laser jet printer accepts paper sticker.

  Any media that you want to execute a LaserJet printer must be intended to be used in a LaserJet printer.

  I found a site which had some information and it seems it will work if it's a black and white laser printer.

  Package of 10 draws on Decal paper
  http://www.bigceramicstore.com/fired-on-decal-paper-10-pk.html

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Laser Jet m1212nf - Maximum paper weight

  I wonder what is the thicker paper stock, that I could put in the m1212nf Printer Laser Jet? Where it can go up to 250 g/m²? I just assumed to page of specifications of the printer a 'card' would be in the range of 200 to 220 gsm weight.

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=3965850#! tab = specifications

  See you soon,.

  CL *.

  Hi, the url you posted lists the maximum weight supported.

  Weight of the media, support of 60 to 163 g/m²

  Media weight, recommended bail of 60 to 90 g/m² (16 to 24 lb)

• Where can I download a user guide for a HP laser jet printer p2055dn?

  Where can I download a user guide for a HP laser jet printer p2055dn?   [email protected]

  Hello

  You may not be able to find the manual for it, but it's the P2050 series Manual:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01461642/c01461642.PDF

  Kind regards.

• Cannot print thick paper my hp laser jet 2840

  How can I print photo paper thick 200 g/m² on laser jet 2840 hp printer it keeps jamming. How windows 7 64 bit hp Pavilion

  What bin you're impression of?  Have you tried to use the 1 vs tray 2 tray, etc.?  Change the tray will often change the paper path and therefore has the possibility of interference do not leave a different bin.  I recommend the Tray 1.

  However, avoid adding print to Tray 1 so that the printer prints or jams may occur. Do not fan paper before loading them into trays and avoid overloading the trays.  Also, be sure to configure the tray properly - make sure it is configured as brilliant - Extra heavy or glossy cardstock.

• LJ4000n - get a black spot (~ 1 ") all along the left side of the paper

  When you print a LJ4000n, we get a black spot, about 1 "thick, along the left side of the paper - see below.  Changed the toner, the printer has been cleaned (according to Chapter 3 - maintenance of printer in the user's Guide) and I've done 2 cycles of cleaning of printing ("create" & "process") Pages.  I'm at a loss!  Any help / advice would be appreciated!

  Fuser needs to be replaced. Open the back door, using a flashlight to check fuser and see to that the heater is damaged on the side in question.

• HP Color Laser Jet CM6040: scratches when printing CM6040

  I have a very annoying problem with my print quality which causes the color to the burrs. Whenever I have print something on my laser jet CM6040 color it leaves a strip of color at the top of the page that spots and affects all pages.
  Recently it was also printing this band at the bottom of the page that you can see in the picture as an attachment. It tends to be worse in the morning when I get to work and first print something and tends to be bad after sitting idle for a while. We have installed a new fusion kit fairly recently so would avoid buying another so soon.

  Can anyone help or everyone knows that before?

  Think about how the image is made on paper. The flow of paper to the top of the side of the printer tray and a secondary transfer roller moves the image of the belt (just the little strip of paper feeds more) in order to fill the document with the complete picture. Continutes to travel at the front of the belt is a wiper brush that removes the residual toner was not transferred to the book and the back side of the belt if another page is printing is the image placed on it as the belt moves on the toner drums. If the belt has a defect in the Wiper Blade, excess toner that is a mixture of all colours (usually purple in color) out of the end of the belt like a streak. That's what I think happens for you. Now one thing you can try who works occasionally for me is to spend about 1 inch belt in the opposite direction, which will expose a lot of toner on the belt. Clean the toner and then advance the belt (always use the edges of the belt to move) and then look below where the belt comes out from the front and see if the line is still present or that it is a party. If passed, then the blade may have corrected itself. If the lines are still present, the blade is bad and the belt needs to be replaced. The cost of the belt is high. You could contact a company like metrofuser.com that may or may not sell belt given to nine for your model see if they have your model in stock. The cost is generally 1/2 of what you have to pay for a new belt, but you will need to return the old belt to them.

• Black spot on the camera

  When I use the camera, a black dot appears on the right side (when you hold the phone horizontally).

  I took a few pictures, a few minutes before the black spot appeared. West nothing on the lens. There might be a microscopic piece of dust inside, but I HIGHLY doubt it.

  I ve heard from a few people that is probably not a physical defect, but a real question much experimented with iOS 8.

  I m using the latest version of iOS, but they also heard some experience the same problem there.

  Any suggestions?

  just to learn, put the dust on your camera and take a look.., well he cant focus just that close, but you may notice theres no way it is dust! However, if she still something to do with the material, as this would mean that the sensor burned some pixels, but this usually happens only if you cam laser or try to take pictures of real welding close or things like that... If you don't have these bad things to your camera, it could be the connector.

  But it is unlikely, even if I had exactly this problem of connector camera back in the day with my 3gs.

  But just because these newer iDevices use screws to attach the connectors its very unlikely!

  If the restart does not work try a little touched the phone and check if the point changes or even disappears. If who have some influence the sensor may be broken since you have this iphone or this is the connector as I have just said.

  If nothing changes by slapping, etc. shaking your phone you should try to restore your device via itunes

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• laser jet 1007

  1007 laser jet prints on full black of the page what are the problem

  Hi @NAGARAJU1,

  Welcome to the HP Forums!

  I understand that your HP Laserjet 1007 printer is printing black pages. I am pleased to see that for you!

  A few questions for you:

  • What is the operating system that you are using? Windows or Mac? What version? If you do not know the operating system you are using, please visit this site. Whatsmyos.
  • How is the printer connected? Wireless, Ethernet or USB?

  In the meantime, please, try the procedure described in this guide, fixing poor print qualityand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon and have a great day!

• How to erase data from 2 printers I want to throw - HP Laser Jet CP1215 & HP Laser Jet III

  How to erase data from 2 printers I want to throw - HP Laser Jet - CP1215 & HP Laser Jet III thank you

  The CP1215 can be reset as described in the paper here.  The Laserjet III has no memory, which would keep the work print or any other private beyond information to remove the power.

• HP Laser Jet Pro M225dw MFP: HP E print App does not effectively bind to the Go Daddy email (HP Laser Jet Pro MFP M225dw)

  I bought a HP Laser Jet Pro (MFP M225dw) and am very excited about the mobile printing option. I downloaded the HP EPrint App on my smartphone (Samsung Note 4) and have successfully my gmail and hotmail accounts related.

  However, I have problems linking my Go Daddy account.

  As per a post on the forum of 2014, I have connected my Go Daddy via Outlook account, used the host name: imap.secureserver.net and Port: 143, SSL: WE. The account "seems" to link; However, when I click on my email Go Daddy Outlook icon, it brings back me permanently to the home screen, (the one that says "Photos, files, Web, Email") such that I'm never able to access really my Go Daddy email account.

  * No error message

  * Bluetooth off

  * 5.1.1 android

  * I have Norton Mobile on my phone

  * Looked at my Go Daddy security settings - no "two-step verification" or "allow the less trustworthy access apps to the ' questions

  Also, I see that this app is not able to print the body of an email; is there a way where information such as details such as email/recipient of the sender of transmission time, electronic mail may be included in the print job?

  Thanks a lot for your time and consideration!

  Hey @Lizaroo,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your Go Daddy email account settings enter the HP ePrint app. For more assistance, your best option would be to contact Go Daddy directly to check all the parameters of the post that you found are correct. Some e-mail clients change their settings often so that I wouldn't be surprised if the info you found is now outdated.

  Printing subject lines and headers, it is not possible to print. The reason is because many users are trying to print photos or documents. In the current situation, if a user were to send an email empty then the only thing that could print would be the attachment. This prevents clients a sheet of paper and the Ink/toner used to print.

  If you have the printer print senders and subject lines you can do so by having the sender to include in the body of the email. Another alternative is to set up an email address which is the sole purpose is to forward emails to the email address of the printer. This way if it is configured to include the information in the body so you will have those printed on the page. Also, this gives the advantage of having a backup of email messages sent to the address of the ePrint printer and if something should happen to the ePrint address, you can change the forwarding address that the email and no one would never know there was a problem.

  Please let me know if you have any other questions. If not, have a great week!

  If this solves your problems, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.