HP laserjet 1018 is not printing after upgrading to Windows 7

I've upgraded Windows vista to windows 7 and my HP laserjet 1018 is not printing.  The status shows "lazy", is not ready.  Any ideas?

you use a windows 7 64 bit or 32 bit?

for a 32-bit operating system, download the software at:

h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=1814094#N670

for a 64 bit OS, download software to:

h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1814094

for any question about the drivers and software for HP products check this site:

h10025.www1.HP.com/ewfrf/wc/document?DocName=c01506815&LC=en&DLC=en&cc=us&OS=4063&product=1814094&sw_lang=

Tags: Windows

Similar Questions

  • DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

    Dear forum,

    I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

    I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

    • A "test print" works very well.
    • When I print a PDF from the edge, the printer creates output but not good quality.
    • When I print an office word document, pages came out empty.

    3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

    Do you have any tips for me?

    With sincere friendships.

    Pieter

    HeyPieter_Belgium

    Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

    HP printers - uninstalling the software of the printer (Windows)

    Remove the driver from the print server properties:

    1. in the folder "devices and printers".

    2. choose "print server properties.

    • Win XP - with no printer selected, click 'File' then 'server properties '.
    • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
    • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

    3. click on the "Drivers" tab at the top of the window "properties of the print server.

    4. choose the printer that you want to uninstall, and then click 'remove '.

    5. choose "Remove driver only.

    6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

    If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

    Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

    If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

    Thank you.

  • HP Laserjet 2100 does not work after upgrade Windows 10

    HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

    Thank you!

    If the printer is connected using a parallel printer cable, please see the link below for the solution.

    http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

  • Cannot print after upgrading to Windows 10

    Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10.  I have a HP officejet Pro 8600.  I downloaded a new drivers, etc, and nothing works.  Help, please

    Hello Kathy,

    http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

    The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

    Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

  • Apple Software Update will NOT work after upgrading to Windows 7

    Apple Software Update will NOT work after upgrading to Windows 7

    flyboy340 wrote:

    Apple Software Update will NOT work after upgrading to Windows 7

    More information is needed.

    Which machine you use, OS X are you running?

    Windows 7 running in BootCamp?

    The OS X app store is not present at all?

    AppStore is present but the update tab does not?

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • Second monitor is not detected after upgrade to Windows 10

    After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

    I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

  • Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

    Hi all

    Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

    His output HDMI for my Sony LED used previously to work properly.

    But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

    I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

    Thank you.

    I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

    To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

  • Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

    Hey!

    I can't get my card reader works after upgrade to windows 10 64-bit...

    Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

    "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

    Have you ever tried the Realtek website?

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

    Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

  • Multifunction HP LaserJet 1536dnf printers: Scanner function not accessible after upgrade to Windows 10

    Function non-contactable on printers MFP HP LaserJet 1536dnf of analysis after the upgrade to Windows 10.

    Here is the error message:

    I recycled the printer... inaccessible even

    I recycled the router and the printer... inaccessible even

    Worked fine before with Norton and Windows Firewall enabled on Windows 7.  so...

    I have disabled the Windows Firewall (but not Norton firewall)... inaccessible even

    I ran "SCF/scannow' with the command prompt... inaccessible even

    I ran HP Print doctor who says that the scanning software was not installed.

    I tried to download and install the software the complete solution... masse not installed properly... even inaccessible.

    Help, please

    HALLALUJAH!  Now, I can scan, fax and print.  I did not follow the directions of RnRMusicMan together.  I just deleted all the HP software that had to do with print and then installed the suggested software.  I do not close the firewall or do any of the other suggestions.  Other people with the same problem may have to follow all the indications made by RnRMusicMan above.  RnRMusicMan, THANK YOU for giving me the link for the correct HP software to solve the problem, HP LaserJet full feature software and driver.   Without your help, I would have not a scanner works on this printer.  I scan most all instead of filing paper.  I was in trouble when the sweep would not work. ... HP support is GREAT!

  • HP laserjet p1006: does not print after changing the toner

    I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

    Hi @cindycb,

    Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Make sure all the orange, packaging material is to remove the toner.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

    Open and close the cover five times quickly. It should print a page with black lines on it.

    You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

    You use Genuine HP Toner?

    Please let me know the result and if there is anything else I can help you. Thank you.

  • HP Envy 7640: Receives the message "print status interface is not responding" after upgrade to windows 10

    After the upgrade to windows 10 I have to manually delete each message in the queue.  I can print one message and then I have to go into devices and printers and delete this message before I can print another.  I have a wireless internet connection.  I checked the print spooler and it is set to automatic.

    It is an addition to this post:

    Later, after downloading the latest version of the software and reinstall the printer, the problem has been corrected.

    Hi, uninstall the printer software and download the installation software for free using this linkHP.

  • HP940c does not web print after upgrading to Windows 7

    recently unclassified HP Pavilion 9500 from Vista Home Premium to Windows 7 Home Premium. After upgrade, can no longer print to Web sites - using IE 11.0. Before the upgrade was using IE 9.0. Tried to print from multiple sites by using the function "Print" in the "Tools" button Was able to copy information Word doc Web site and print it from there. All ideasas to problem?

    Hi twf42,

    Thank you for being an active member of the HP support forums.  I understand that you have an impression of Internet Explorer 11 problem on your Windows 7 computer.

    I have included a link in Microsoft Internet Explorer required 11.  Microsoft says IE 11 runs only on computers running Windows 8.1 or Windows RT 8.1.

    Microsoft Internet Explore 11 system requirements

Maybe you are looking for