HP LaserJet 1200: HP LaserJet 1200 connected via USB to the PC with Windows 7 is not redirected in DRC

Hello.

HP LaserJet 1200 connected via USB to the PC with Windows 7 (32 bit) and works fine (latest drivers via Windows Update installed).

But when I have connected via RDC (Remote Desktop Connection) for PC with Windows XP and try to print from this PC to LJ1200 - it is not redirected in a remote desktop session and I did not see in printers and Faxes folder.

Other printers from PC with Win7 works fine via DRC (XPS Document Writer and PDFCreator).

During this time when I do the same thing from another PC with Windows XP, LJ1200 (connected via USB to the PC) works very well through the DRC.

Anyone know how to make LJ1200 to be redirected in a remote desktop session?

Thanks in advance.

For more information, here are 2 possible solutions:

1. put two computers in the same workgroup and then share the printer and install from the remote computer.

2. best solution: install on PC with Windows 7 drivers for Windows XP (PCL6) - it works very well as a redirected local printer via DRC!

Tags: HP Printers

Similar Questions

  • Is it possible to share a hp color laserjet cp2020 connected via usb to a 32-bit with a 64-bit PC?

    I have a client that is running a PC XP 32 - bit that has the Color Laserjet CP2020 connected via USB. It is shared on the network to the other PC, but I've recently upgraded to 2 PC for Windows 7 64 bit and now I can't connect the printer shared for them.

    Try the following: install the drivers for Windows 7 x 64 on your Windows 7 machine as if the printer will be attached locally.  Then on the Win 7 machine go devices and printers folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, then select the cp2020.

  • HP officejet 6500 e709n NOT connected via usb to a pc running windows xp

    I have a hp officejet 6500 e709n connected via usb to a pc running windows xp.  It has stopped printing.  I tried to uninstall and reinstall the printer software.  Now, when you try to install, I get the screen of "connect your device now' which indicates that the printer is not connected.  I've tried different USB ports on the pc with the same result.  Has anyone else encountered this situation?

    Uninstalled and reinstalled several times and finally got running again.  This can be closed.

  • HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

    Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

    Thank you

    Hi @kattok001

    I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

    Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

     
  • Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

    Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

    Try using using the Image Capture (in the Applications folder)?

  • drive external hard connected via usb hub powered Time Capsule guard fall...

    Hello.

    Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

    When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

    After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

    What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

    Just seems like something somewhere that expire, causing it to drop the connection...

    Thanks for your useful suggestions to fix this!

    Is your TC the Gen5, model AC?

    I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

    What is the speaker (the box is powered)?

    Quality of the envelope varies a lot... What is it??

    If this is the typical brand X... Plug it into your Mac. is it reliable?

    Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

    I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

    I start TM. After a few minutes the backup fruitbodies.

    Check in the finder, it has created the sparsebundle and works.

    Can you have a USB hub between the external hard drive and time capsuls?

    It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

    Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

    The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

    I started a thread for a database just now... has not progressed much.

    https://discussions.Apple.com/thread/5912861?TSTART=0

  • Satellite C660-1RQ cannot connect via HDMI to the NEC projector

    Hello.

    I have laptop Toshiba C660-1RQ.
    It can not connect via HDMI to the NEC projector.
    I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58

    I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...

    And my HDMI works with monitors, TV (but sometimes!), etc.

    I don't know what to do...

    > And my HDMI works with monitors, TV (but sometimes!), etc.

    If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.

    What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?

    The use of Fn + F5 keys can toggle between internal and external display.

  • D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

    Printer D1370 MF w / usb on win7 x 64 machine connection.

    I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

    However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

    So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

    1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

    2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

    3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

    4. What is the error Code 162,0,0?

    5. where is the complete list of the error codes for MF Toolbox.

    6 help!

    Hi monza.

    I know that this issue is frustrating and I'll be happy to help you.

    The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

    Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

    The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

    1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
    2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
    3. On the computer, open the MF Toolbox and select [PDF].
    4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

    Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

    imageCLASS D1370 - Brochures & manuals

    I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

  • To connect to the PC - tab 8W - not seen when connected via USB - Help!

    My new 8W tab is not seen by the PC connected via USB. Both are Windows 10. Help!

    Out of curiosity I will pick up an OTG cable and let you know the result!

  • Trident video capture card connected via USB 2 not working not properly under XP

    I use a Trident card connected via USB 2.0 video capture and I had a weird behavior:

    -sometimes not detected (not included in the list of devices)

    -sometimes not recognized (unknown device)

    -sometimes not start (Code 10)

    -sometimes works very well

    I used a USB Tracker to study the issue and found out that the usbehci driver is not able to activate the USB port.

    The message sequence is as follows (when it works):

    Get the status of the Port (4) - success

    Serial Port (4) feature, Reset - success

    Get the status of the Port (4) - success

    | - Port is enabled

    This is when it does not work:

    Get the status of the Port (4) - success

    Serial Port (4) feature, Reset - success

    Get the status of the Port (4) - success

    | - Port is NOT enabled

    Function Clear (4) Port, connect to state change - success

    Get the status of the Port (4) - success

    Serial Port (4) feature, reset the change - success

    I have more tracks, but I don't know if this is the right place to post.

    Thank you in advance to anyone willing to help me.

    Sincerely

    Andrea

    * original title - device USB not recognized or not started or sometimes work *.

    This link might be useful for:

    Advanced troubleshooting tips for General USB for Windows XP problems

  • Play music while connected via USB?

    Is it possible to play music while connected via USB?

    It would be very useful for those of us who listen to music all day at work.

    Workaround/hax solutions will be appreciated.

    Hello britoso and welcome to the forum.

    The Clip cannot read music when it is connected and communicates with a computer USB port. If you want to keep the battery from flowing and still be able to listen to music, you will need to get a USB charger or try one of the methods described in these discussions:

  • connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

    connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

    Best regards: John

    Hello

    -Do you have Bluetooth devices internal or external connected to the laptop?
    -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
    -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
    -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

    I suggest you to go through these below items that could help you to fix this problem.

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this information helps you!

  • OfficeJet 5740: OfficeJet connected Via USB and wireless?

    I just bought a HP OfficeJet 5740 printer.

    Currently, my printer is connected via USB to my PC. Could I also set up to be connected wireless at the same time so that I can print from a Tablet?

    Yes.

  • Can range of printers HP 6830 - I connect via USB and ethernet?

    I just bought a printer HP 6830.  I have a Windows Vista computer that I don't want to be connected to the internet and a PC of Windows 8.1, but also a laptop Windows 2000 who are both connected to the internet via ethernet (and can also be connected via a wireless connection).  I was hoping to connect the printer to the PC via the port USB Vista and for Windows 8.1 PC and laptop computer via an ethernet cable.  Can I connect via usb or ethernet connection at the same time?

    Hello

    You can install the software via a USB port on your Windows Vista PC, do not connect USB until the installation guide to make.

    So you can connect the printer to your network and install it on Windows 8.1 PC, USB and a network connection can be used for concurrency and would not interfere between them...

    For the PC under Windows 2000, the printer is not compatible with the operating system and there is no drivers for such a, you can find the system requirements below:

    http://support.HP.com/us-en/document/c04268294

    Kind regards

    Shlomi

  • Windows 7 will not recognize or sync Pocket PC which is connected via usb

    Hello

    I am trying to sync my Pocket PC data (Pal my ASUS a686) on my computer (Windows 7 Enterprise). I think that if you had Windows XP, we would use Active Sync. However, it's windows 7, so I think that I use Windows Mobile Device Center. In fact, I used the center of the device before, but it has been a week to try to download the data again and it no longer works. He is very picky. But we need our data and cannot wait for the day that he decided to download.
    So I uninstalled the center of the device (the tip of a chat room) and now I can not re - load it. However, before I even uninstalled, the problem returning to the top, it was my computer does not recognize the device connected via usb.
    Code 43 continues to come does not recognize this device. And yet it is plugged. I keep trying to restart, plug the unit in different orders, send good energy, etc.
    I did a soft reboot of the pocket pc the last time, but that makes you lose all data on the pocket pc and we cannot lose this data. Finally, it is for the eco-counter software. When it worked, I hit the sync button and the data were downloaded. Now... He says just connect me please my pocket pc when it is connected. Why!
    Thank you
    Cole

    On the Pocket PC, try going to "start |" Settings | Connections | USB to PC"and unchecking the checkbox"Enable advanced network functionality. "

    HAL

    --

    HAL Hostetler, TCE

    Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

    www.kvoa.com - KVOA television, Tucson, AZ.

    Live Hot Licks -www.badnewsbluesband.com

Maybe you are looking for