HP LaserJet 1505N

Anyone know when the pilot is ready for Mac OS 10.6? I just get the same answer... we are working on it! What is the problem? I knoew I should have bought an Epson!

Use 'Laserjet 1015 + 2.5.3 Gutenprint' driver, works like a charm.

Tags: HP Printers

Similar Questions

  • LaserJet 1505n: cannot print on 1505n Workstation Windows 7 x 64 - no way no how?

    Recently built a new Windows 7 work station using my usual model - and trying to install/connect to our LJ 1505n - which is hanging on 192.168.1.8 connected to a switch in my wife's Office.

    While the driver to install and the instance printed on my work station all look great - if I try and print a test page - the page hangs in the spooler - as always.

    If I right click on the printer icon in the taskbar - right after sending the test page - I see the doc on hold and waiting. I dropped the camera and reinstalled about 5 times. I ran the HP print and Scan Doctor against the installed instance - it is said that all goes well. But even by making a Test print from the doctor - never complete.

    I can go to 192.168.1.8 via a browser, and the printer is all good. Everything is good. The device is online. Device is accessible, etc. who responded.

    What I'm missing here?

    Sonic.

    Drakster,

    I have an update to this issue. It made me mad that other devices on our network have been able to print fine to the P1505n without having to mess around with the printer, the switch or anything else.

    Yesterday afternoon, I did a test with my workstation DAW studio - shot - print a test page - everything was good. Did the same thing to my workstation (the only works not properly) and encountered the same obstacle.

    I noticed if I right click on the printer icon tiny in the printing status bar and choosing queue to print the 1505 - I could see my expectation of document - but the status column displays "error - printing". Not very useful.

    Then - I finally understood the question. My workstation has installed software VPN (pulse of Juniper) and I remember very well have questions like this before - where software Pulse - when enabled - would throw up a wall around the PC and do not leave any substance network happens - like impression.

  • Driver for the hp 1505n printer

    Hello

    I have the Hp Laserjet 1505n printer

    I need Driver for Windows 8 64-bit support

    Hello

    Please use the following link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=3435671#N200

    Kind regards.

  • Download SNMP MIB for Laserjet 5550 and 1505n. Paper, stuffing, etc.

    Please help me. I need the MIB files for SNMP messages as paper, jam, etc. Printers are LaserJet 5550 and 1505n. Rules of HP.

    Thank you very much for the help. I discovered a different way, but it's here:

    On the right side you can see the address and in the Middle, the data type and name. They are all in position 0.

    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperJam, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.9
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.8
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PeripheralError, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.6
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_ConnectionTerminationAck, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.5
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NewMode, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.4
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_InterventionState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.3
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_AtBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.24
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TcpBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.23
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LlcBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.22
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NovBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.21
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Reserved, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.20
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.2
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOutput, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.19
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Printing, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.18
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_DoorOpen, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.17
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Initialize, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.16
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Wait, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.15
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Busy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.14
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_IoActive, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.13
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_MemoryOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.12
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PagePunt, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.11
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TonerLow, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.10
    syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LineState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.1

    I hope it is useful for someone too.

    Best regards to all users of the forum!

    Cristian

  • LaserJet p1505 for connection wireless printing

    I have a Laserjet P1505 (not 1505n) a Net Gear N600 dual band Router router with USB port and printer. I tried to connect the printer USB cable to the USB port on the router and installed the printer on the laptop (a Windows Vista) I'm trying to save up for a wireless printing capability. The updated drivers from HP Web site, set to turn on printer 'sharing' but the printer does not appear in the network and sharing Center. Have directly connect the printer USB cable to the computer laptop USB port to print from the laptop.

    I missed something or cannot print via the router P1505 (without the "n")?

    Thank you

    I found a post where a similar problem has been resolved. The user has enough to show what he has done to help others like you. I hope this helps.

    OfficeJet 7210 won't install with Netgear N600 router

  • Printer Driver HP LaserJet 6 p file

    I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

    Thank you for your help

    Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

  • My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

    After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

    Open System Preferences > Printers and Scanners and select the print tab.

    Then the right or control click on the printer on the left then click: reset the printing system

  • How can I connect my iMac for HP Laserjet CP2025 El captain

    Connection to HP Laserjet CP2025

    Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

    This article should help you to solve the problems of printer on your Mac - Apple Support

  • I need the Hp Laserjet M2727nf Hp scanning software

    Need a Hp Laserjet M2727nf Hp scanning software

    You really have a classic Mac, a very old machine now.

  • HP Color Laserjet: HP Color LaserJet - lines/stripes

    Hello

    I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

    I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

    Thank you!

    Although I work for HP, my posts are MY opinion and not those of HP.

    I would recommend some of the things

    First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

    Then, make sure that the toner collection unit is not complete

    Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

    • Maintenance of the unit
    • Calibration / cleaning
    • Cleaning page

    You can also view this document as well.

    HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

    Hope that helps.

  • Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

    I can use WIndows 10 if the fix is available for this OS.

    I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

    Any help would be greatly appreciated.

    Thank you

    Hello

    Install the following firmware for your printer, and then look for a difference:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

    Kind regards

    Shlomi

  • Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

    Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

    I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

    I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

    I had care of do not connect USB until you are educated.

    I tried repeating the installation without uninstalling first and get the same result.

    I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

    I tried to do a right click to run the installer as administrator and get the same result.

    I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

    The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

    I tried to connect via USB 2.0 and 3.0 ports.

    I cleaned recycle them and temporary folders.

    I have updated the firmware of the printer to the 20160331 version.

    Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

    I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

    Thanks for any help solving this.

    I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

    DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

    1. go into the Device Manager and find the printer in the list of devices

    2. right click on the printer and select "Update Driver software"

    3. click on "Browse my computer for driver software".

    4. choose "Let Me pick one...» »

    5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

    6. click next and back to the installation of hp box and must now see the printer and continue the installation.

    -Alex

  • I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

    When I scan or fax, we get:

    PCL XL Error

    Subsystem: TEXT

    Error: InternalError 0 x 50

    File name: cheettext.c

    Line number: 710

    The printer is a Pro 400 Color MFP LaserJet - m475dw

    Windows 7 Professional Service pack 1

    What should I do to fix this?

    Thanks for the help.  I actually did an update of the firmware and it solved the problem.

  • LaserJet M1212nf MFP: Setting up printer blocked by the administrator

    Hey. I've updated to win 10 - now try to install the printer LaserJet have disabled Kasperski, but still get the msg: an administrator has blocked you from running this application. For more information, contact the administrator.
    Pls help.
    Thank you

    Good afternoon @Wogla777,.

    It is a great location for extra support! I see you are having problems installing the printer software. I'd be happy to help you.

    I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.

    Note: Do not connect the USB cable until you are prompted during the installation.

    • Go to your Start menu and in the box "search programs and files", type CMD.
    • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
    • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
    • Then, close CMD and then restart your computer.
    • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
    • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
    • Under the administrator account, install the printer software.
    • Test the printer.
    • To disable the Admin account start at step 1 and type net user administrator / active: No..

    If you still experience this issue, it may be the user's profile. Create a new user and try to install the printer on this account.

    • Open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
    • Click on manage another account.
    • Click on create a new account.
    • Install the printer on this account.

    To say thanks, you can click the 'Thumbs Up' and if the question
    is resolved you can click on the button "accept as a Solution.
    Please let me know the results. See you soon!

  • LaserJet M1132 MFP: Error E3 on M1132 MFP

    Hello

    Please help, I get the error E3 despite the fact that I've changed the cartridge, made sure that all packages are cleaner, cleaned the iner part of paper, disconnected and reconnected several times.

    is there a way to reset?

    Thank you

    I beg of you. Where E3 is an indication of a paper jam (could make sense given the noises your description), try the procedure described here: remove a paper jam for HP LaserJet Pro M1130 and LaserJet Pro M1210 Multifunction Printer Series.

    If the problem persist, it would be better for you to call us.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number are displayed.

Maybe you are looking for