HP LaserJet 200 color M251nw: 200 Laserjet color m251nw in paper

Similar Questions

• Color LaserJet Pro 200 M251nw: torn paper jam

  

  Hello

  One of the printers of the company I am based in had a printer Jam recently, some people tried to remove the paper from the printer and ended up ripping it (as seen in the image above). I was wondering what should do us from here, I tried to get out the paper but I didn't chance, any advice is appreciated

  It seems that the paper is stuck in the fuser unit.  Only suggestion I can offer is to do a search on google for the service manual and look for instructions to remove fusion and unit once you have the fuser unit you should be able to find a way to remove paper stuck in it.  Removal of the fuser unit is not as simple as that.

• Color HP LaserJet Pro 200 M252: clearing the jammed paper

  Printed paper is stuck between the back door of the printer and the output area and is not reachable to clear for further printing.   I can't access this area.  How can it be erased successfully.

  Hi @trevorat10 ,

  By your post, I see that you have a paper jam from the rear door of the printer and the output area. Want to know how to remove it. I want to help you solve this problem.

  I'm sorry, but I can't find a color HP LaserJet Pro 200 M252.

  When the printer was purchased?

  You may color HP LaserJet Pro 200 M251 model?

  Please call our technical support at 800-474-6836 if the printer is still under warranty for assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.

• LaserJet Pro M276: What paper Laser Photo 4 X 6 can I use in a Color Laserjet Pro M276

  What paper Laser Photo 4 X 6 can I use in a Color Laserjet Pro M276?

  Hello

  Go to the next page, the first page only 12 points from the list. In any case, HP provides larger format documents for Laser printers. I do not know why:

  http://store.HP.com/webapp/WCS/stores/servlet/CategoryListingView?catalogId=10051&CategoryID=88331&langid=-1&StoreID=10151#! & TabName = vao

  I do not print photos at home, too expensive, but for the test, I normally print 4 photos on a single sheet (A4) and cut in 4.

  Kind regards.

• Color LaserJet 3600n's standard paper tray

  We have a Color LaserJet 3600, who had a problem with the standard paper tray being stuck.  Could not get out until we were able to get inside the machine and press the metal plate that makes up the paper when the drawer is in the printer.  After we got him we found a small piece of plastic broken on the end of the right side of the metal plate that sticks through the plastic side of the tray (see picture).  Someone know where I can get this plastic piece without having to buy the whole set?

  In general these tidbits on the bins of paper, like this one, is not available by themselves. We can check the HP parts store to see if the part is available, but probably it will take to get the tray as a single unit.

  I hope this helps.

• Ink laser jet pro 200: numbers of HP photo paper

  What are the numbers of HP Paper Photo quality for printing my color Laser printer?  I'm having a hard time finding just the photo Laser paper.  Everything seems to be for inkjet.  I think that HP made the printer, they probably have the book I need to go with it.  I want the paper to be like paper, I get prints of the store.  Just a few light paper every day.  Thank you.

  Hi @nicats,

  I see by your message you want to read a paper that you can use with the Laserjet Printer. I'd love to help you.

  You can use any multipurpose paper, bright white is recommended for LaserJet.

  Here's the color HP Laser Photo paper (glossy) for printers Laser - 8.5 x 11 Q6608A information.

  Most Laserjet printers supports the following type of paper: paper (bond, brochure, colour, glossy, heavy, paper header, light, photo, plain, preprinted, prepunched, recycled, rough), transparencies, labels, envelopes, thick paper.

  16 to 43 lb (up to 59 lbs with HP laser glossy photo paper)

  If you have any other questions, please provide the full name of the printer.

  How can I find my model number or product number?

  If you appreciate my help, please click the button below the thumbs up.

  Good day!
  Thank you.

• Suggestion for the color laser glossy paper printer...

  
  

  We have the M452dw Pro of LaserJet of color HP which is currently on sale for only $299.99 (price initial $499.99)

  It can print only, wireless. Letter from the printing speed: up to 28 ppm (black and color). Automatic duplex printing. 2 (standard) paper trays.

  See the link below for more details:

  http://store.HP.com/us/en/PDP/HP-Color-LaserJet-Pro-m452dw?cc=us&lang=en

• LaserJet P2015d: Laserjet don't feed paper unless I opened before each time

  Hi all, I recently have a problem with my Laserjet P2015d how can I get to print each page of a document, I need to open the hood before (like matching the ink cartridge) and then close it to print the next page. If I do not open the lid before you start printing, it light-error with a flashing orange alert indicator. It does not send the error codes to the computer but then I don't really see what it is. But from what I hear, it tries to feed the paper from the cassette, but fails, unless I opened on the front, then close it and for some reason it work just for a single page. When he tries to move to the next, he fails again. How could solve this, or is it a bust? Thank you

  When the bin is full the indicator says it's because the metal tray is all the way at the bottom of thie plastic frame, i.e. where he sat when he was full of paper and the drawer is closed.

  When you first put all paper in and looking at the indicator is shows a full tray until you close the drawer, then when the paper raises it shows the actual level.

  So at this point, that looks like you close the drawer, then paper comes up, if there is not a lot of paper in the tray it will feed a sheet but the mechanism which is to follow the set allows to fall and you get no paper feed more.

  So, you could have actually just a defective Board.  If you can find another P2015 to borrow a tray, can you could test.

• LaserJet CP1525: Laserjet CP1525 generates errors 'paper jam' on almost everything I print and there are no jams

  Hello everyone, I have a Laserjet CP1525 who I am troubleshooting for a colleague, and no matter what we do whenever we try to print, we get "paper jam in tray 2" "clear jam and then press {OK}."

  I checked this printer up and down and everything autour and there is no jams, there is not a coward or a sheet of paper, the platters, and linings are very clean, I opened all the doors on the printer, but we still have this isse. Toners are all fine, black, it becomes weak, but it is quite the impression that I was able to print a single test page.  I don't know what else to do. Any help is greatly appreciated.

  Thank you!

  How old is this printer.  How it was used.  On this engine, I saw a lot where the roller is worn and it won't pick up the paper.  The roll is kind of a pain to change, but on what I laid out with this issue, once I have change the roll everything works fine.  Remove the tray paper and printing tilt up and with a flashlight he will shine on the roll.  Do not touch the roller.  There should be steps on the roll that you can see.  Most of the time there are only steps on the outside or the inside only and the rest of the roll is smooth.  If this is the case, you will need to change the roll.

• LaserJet 5200tn tray 3 paper jam

  I have a Laserjet 5200tn who gets a tray 3 paper jam, each time, prints fine from Tray 1 and 2. Page feeds on tray and stops with the leading edge just below the exit rollers. I replaced rollers pick up in tray 3 and checked for obstructions the paper path, no effect. Any help would be appreciated, I'm stuck.

  Hi DeweyE,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  Hope this helps, have a good!

• HP LaserJet Pro M1530 MFP paper management

  How can I configure the MFP HP LaserJet Pro M1530 to choose paper from the bin to paper and not from the status bar, manual power all trays are loaded paper.

  Hi emoh3,

  With some printers, the manual tray is separated from the other trays. On this printer the manual tray uses the same pickup, power system as the main feeder that requires you to remove the paper if you want to print from the main tray. The manual tray for this printer is mainly used for envelopes or other special media that you want to print.

• LaserJet IIIp accordion pleated paper

  My LaserJet IIIp was a special paper feeding problem.

  It feeds paper out of the slot to eject before without problem, but out of the rear slot, the last third of each leaf looks like a sweet accordion fold or pleated in flange.

  The problem is definitely in the last set of rollers.

  If I eliminate these rolls the feed is good, but the leaf does not come completely out of the machine. (I ran some tests with the lid removed to prove that the entire sheet is printed and smooth (and) all the rolls before the last series comes...

  I don't understand why the first 2/3 of each sheet comes out of the printer smoothly but the third last undulations.

  Does anyone have a suggestion as to the cause?

  Nice to see that some HP products are capable of longer than a few years.

• HP Laserjet 2600n's frequent paper jams

  Sorry, this is my second post on this topic. I get paper jams in the main feeder of my HP Laserjet 2600n. It will not pick up sheets of paper so never really jams - it just stays in the tray of the printer. I make sure to put just the right amount of paper in, but it will not always pick up the leaves. How can I get the paper tray to work properly?

  HP has a video that shows how to do this:

  http://h20464.www2.HP.com/resultsCSR.htm?prodSeriesId=446153&MEID=1B81D21C-B796-4D07-9D6D-E2B519E93960

  Just click on the heading "Replaceing and disassembly of parts" paper roll and scroll down to view the animation.

• LaserJet M276nw - envelopes / Legal paper feed / manual

  Can someone tell me how I can print envelopes / legal communication and manual feed my LaserJet M276nw?

  Thank you!

  The M276nw printer does not have a manual feed slot.  To print a two-sided with this device, we could have taken the page printed and updated new paper in the tray.

  See the section on loading the paper tray in the user guide of the printer for more information on the use of envelopes and legal papers.  Click here to view the guide of the user to the M276nw.

• LaserJet p3005 printing 'path paper test' on 2 faces prints.

  Hello

  Installed a p3005 and everything was fine.  When they go to print 2 sided, it prints 'Paper path Test' words on paper.  Any ideas?

  Thank you

  TJ

  There is a test of path of paper under the menu of diagnostics on the printer that prints on the paper, but it should print only when the test is activated.  You can post a copy of what the user does.