HP LaserJet 200 color MFP M276nw trouble after faxing

My operating system is Mac OS 10 10.6.8 product # is CF a 145.  When I send a fax, it goes through, but then I get a 'call' short message and then I get a message 'connection' that don't die out.  If I hit Cancel, and then 'Cancel' message comes on but won't turn off.  I have a Panasonic 5.8 GHz Digital expandable wireless answering machine and 5 handsets that are connected to the base unit.  I have not connected the base unit to the printer.  That I should?  Help, please.  It's a 2 line phone system, but I'm now using only one line.

Hey Lakewoman,

I understand that you have a problem with sending a fax from HP LaserJet 200 Color MFP M276nw.

Unplug the phone devices that you have plugged into the phone jack.
Connect one end of the telephone cord provided in the box with the printer on line 1 port at the back of the printer.
Make sure that you connect 1 end to the telephone outlet and other online 1 on printer
Use only the telephone cable provided with the printer

This document will help help.

http://support.HP.com/us-en/document/c03363598

Please do not hesitate to contact me if you have any other questions

Thank you

Tags: HP Printers

Similar Questions

  • HP LaserJet 200 color MFP m276: HP LaserJet 200 color MFP m276nw - scaning problem

    Dear gentlemen/ladies, Documents on the flatbed scanner / / UH m276 Color MFP HP LaserJet 200 cannot be scanned in the network folder, scanner, in my office by WiFi. He keeps giving the error message "username or password is incorrect. This user account and password are valid. "Please note that the wireless test is successful. A such problem, until the desktop computer (some bad sectors on the hard disk) has been repaired at the shop of the computer a week ago. However, I can use apps in my office to print and use the HP LJ200 M276 Scan to scan documents on the printer tray and save it in any folder remotely via WiFi. Please please advise solution/method that I can do to solve this new problem. Stephen

    Hi @U-Talents.

    Welcome to the Forums of HP Support! I read your post and see that you are not able to scan to network folder. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    I have provided a document to configure the scan to network folder. Follow the steps, there is a section to create the folder and set up the sharing and security:Scan of the control panel (including Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.

    This post is @wardell1, it can also help with this error message: try to configure the scan to network folder, name of user and password is incorrect. Do not take into account the model.

    I have also provided a @ShlomiLstation, on the same issue: scan to network folder fails.

    Try these documents to see if they help, and if there is anything else I can do, let me know. Thank you.

  • HP LaserJet 200 M276nw: Configuration of the network for HP LaserJet 200 color MFP M276nw

    Can the M276nw of 200 HP LaserJet can be configured to scan to a network without initial setup of a PC folder? Without having first to connect the unit to a computer first.

    We run a virtual environment and the printer will need to scan to a folder configured network and this should be done through the device. Of course, file permisisons will be completed before. I think I saw a manual where the Embeded webserver had this configuration, but would have to make sure, before committing to the purchase. Thanks in advance.

    We gladly invite you.

    Yes, the printer supports the SMB Protocol indeed.

  • Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

    Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

    What I've tried so far:

    Installed the latest drivers > unsuccessfully

    Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

    Have any suggestions what to do next?

    Update: the solution provided in this thread solved my problems:

    http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

     
  • Connectivity Bluetooth on HP Laserjet Pro 200 color MFP M276nw

    Madam/Sir,

    There the bluetooth on HP Laserjet Pro 200 color MFP M276nw connectivity?

    Hello

    I looked towards the top of the form to you, and not, unfortunately there is no bluetooth device.

    http://support.HP.com/us-en/document/c03315988

  • HP\HP LaserJet 200 color MFP M276\Help_Learn\Help.exe works but does not display anything?

    After several relocations I still see HP\HP LaserJet 200 color MFP M276\Help_Learn\Help.exe and clicking on the icon I can see (by the Task Manager) running.

    Nothing visible on the screen?

    Hi marahu,

    My apologies, I should have been more clear!

    You can certainly still use your Firefox for everything, it's just that the LaserJet software relies on Internet Explorer, so we must still make sure it is up-to-date, but you don't have to use it if you do not want.

    Now you can go to Internet Explorer 11, simply use the link in my last post

    Once done, if the help file still doesn't load, you have to uninstall the printer and reinstall so it can recognize the updates you made.

    I would like to know how it goes!

  • m276nw: more great paper for hp laserjet pro 200 color mfp m276nw tray

    Is there an extra tray for the m276nw

    Sorry, the input tray 150 standard page is only available for the HP Laserjet Pro 200 m276nw Color MFP tray.

  • LaserJet Pro 200 color MFP m276nw no network connection with Linksys HUB

    Hello

    I install my Color LaserJet Pro 200 m276nw MFP to connect to my home network using a wired connection.

    When directly connected to my router, the connection initializes and successfully receives an ip address. I was able to access all the functions connected to my router directly either wired or wireless network.

    I also have an old Linksys hub and when the printer is connected to the hub, it does not initialize the network connection. The hub works with all the other sevice in my network, including a few game consoles and a Mac Mini.

    Is there a network advance setting that I have to look?

    Thank you

    Hello

    I don't know if an IP address conflict is my problem as it is not a problem with another device on the network. But it is certainly a kind of incompatibility.

    I found a work around. I have an old LInksys WRT54GS router, I was about to sell and read that I could turn in a switch with a custom firmware, DD - WRT. After you have installed the custom firmware and following some instructions to configure in a switch (including setting a fixed IP address as you suggested), the router-turned-switch worked like a charm.

    So, it is definitely an incompatibilities with the Linksys Hub EFAH05W. Maybe this printer don't like hubs. I read the hubs do not succeed as a router or a switch network traffic only.

  • the white pages when printing for laserjet pro 200 color MFP M276nw

    When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

    You are unable to print the 'print quality Page' of the façade or do not know how?

  • Are total prints Page current cumulative use? HP LaserJet Pro 200 color MFP M276nw

    I have a HP LaserJet Pro 200 M276nw MFP color

    Are total impressions on the Page report cumulative use for the life of the machine?

    I want to print a Page 'use' every month, because I want to know the total number of impressions (impressions & copies) I print every month, or between two dates for that matter.  This will also help me to know the number of impressions I get from my ink, etc.

    If the 'Total' Impressions is cumulative, then I can just subtract two numbers - one of the last - to get the difference.  But if this isn't the case, then I have no precise information.

    Help, please.

    Thank you.

    Yes, the total number of impressions is cumulative over the life of the product.

  • HP LaserJet Pro 200 color MFP M276nw - Duplex / legal

    Can someone tell me how I can print duplex?  Once the computer prints the pages, he invites me to turn the paper.  However, I don't see a place for hand feeding as my old HP printer.

    So, how do I print legal?

    Thank you!

    Here are some great questions.  The laserjet M276nw doesn't have a manual feed slot.  It is necessary to remove the tray paper out and replace the printer page in the status bar to print on the other side for duplex printing.

    Information for this lie in the printer manual, located here.  Take a look at pages 25 and 26.

    Take a look at the picture below to get a better idea of the use of legal size paper in the paper tray.

  • LaserJet Pro 200 color MFP M276nw PC with BSOD crashes

    Printer connected to Windows 7 64-bit PC via a USB cable.  As soon as the last leaves page the printer after printing the PC hangs on a blue screen with corresponding memory dump.  Printer is new purchase and I was reluctant to go for a printer processing class from the off, but it was at a price (with cash) that I just couldn't ignore with more features that I even wanted to.  Something has to give, and in this case, it seems that it is the software of printer driver? (Semi-supposition). This is obviously a problem that needs to be resolved immediately that I'm strongly tempted to return to the store for a full refund and put it in reverse (dare I say here... an OKI machine?).  Another reason that I bought the thing was my first laser a Laserjet III who served me perfectly for 20 years!  But then even HP is only quality far then and it cost about £2 500!  Restore this confidence in HP products and support to let me know a solution simple and quick as soon as possible because I really want to take it back... and I hate to leave negative comments!  Thanks in advance!

    Hello

    If the printer is connected to a USB 3.0 on your computer, try to connect to a USB 2.0 port and check for the difference.

    So try following the directions below and check if this can help:

    http://support.HP.com/us-en/document/c03477088

    Shlomi

  • AiO + HP LaserJet Pro 200 color MFP M276nw iPad app

    Hello.

    I am leaving the AiO iPad app recognize my printer M276nw.

    AirPrint printing flawlessy, so the HP power application only (it recognizes the printer and let me check for toner levels).

    There is no way to let the printer appear in the AiO Remote app but no luck.

    I have tryied a wifi and ethernet connection. I tryied several devices with different iOS version but no positive results. Verify the new firmware on the printer itself says latest version is already installed.

    Any help would be appreciated.

    Thank you

    Luca DB

    Problem finally solved!

    How you ask? I connected my laptop by entering the static IP address of the printer such as the URL in the settings of the printer page via a Web browser. On the settings page, under the network tab, in the left menu under Setup, I selected the advanced option. In this advanced page, under the heading other settings I ticked the box Reset Factory Settings for all of the network settings and I clicked on the button apply. And voila, the HP AiO Remote App on the iPhone and the iPad is instantly the printer. I still don't know what happened in the first place, but more importantly, the problem is solved. It took a while, but it finally works. My happiness!

    Best regards, bottom

  • Printing problems in Mono from an iMac from Apple on a HP LaserJet Pro 200 color MFP M276nw

    Problems printing mode Mono of Apple iMac.

    Affecting the still B & W prints ONLY in color, despite selecing B & W in the framework on iMac in print.

    Have also tried to change parameter in the HP online portal - doesn'e seem to be a facility to select or clear the print in both modes.

    'Copy', black - print in B & W (so I know the printer is able to DO!)

    Does anyone have a solution for this please?

    Thank you very much - this fixed it finally.

    Confusion was - Presets show black and white, project

    I have seen that 'Safari' has a menu drop-down and many more options to select.

    In doing so, and by selecting color / quality - helped me to solve this problem.

    Thank you very much indeed!

    Yvonne

  • HP laserjet pro 200 color mfp m276nw

    I try to install the drivers for the above printer and the installation fails. So, here are my findings:

    -the printer driver has been downloaded from the HP website.

    -the installation process stops at exactly 80% of the first ' stage '.

    -during the running win 7 64 bit edition Home premium on a laptop Acer

    -It is my second installation. I already installed on the same computer (AVG AV) once and it worked fine. but I had to recover the laptop (and re - install the driver), but this time, it just doesn't.

    -J' use the software as an administrator.

    -windows firewall is running Microsoft security essentials. both have been disabled during the installation attempt.

    It SHOULD work, but it does NOT work.

    Product number: CF145A

    Serial number: {Private Information Removed}

    Thank you for your response.  I was coming in here to write something that finally worked for me. Maybe, when someone does a search on the forums for a solution like I did, they can try what I tried and it works also for them. By browsing the section downloads/drivers from the hp support site, I noticed a firmware file that I could download. I installed and rebooted my computer. I was relieved when I finally saw this installer I ran so many times before you get it 80%. I now have the software and drivers installed on my pc. Thank you for taking the time to post a possible solution for me.

Maybe you are looking for

  • Windows Vista crashes without opportunity

    Nice day I have windows vista and it freezes without opportunity. I'm doing a picture of program to control the pc from toshiba. .When it freezes, I have to close the PC by stop key. Please can you help me?And sorry for my English.

  • Why LabVIEW jump commands in programming structures

    Hi all! Is there a way you program it to do run all THE commands in a loop before entering another loop of labview? For example, I have some time who stops in a loop if either the stop button or if the entry of setpoint is greater than 8. If these tw

  • You can use the value of a digital indicator in a digital control?

    Hello! I have to develop a code where I need to find the maximum value of a waveform and draw a line at 50% of the value. So I chose find the amplitude of say 10 cycles of waveforms and found the maximum value of the amplitude. But my real problem is

  • IdeaPad s10e does not start

    Hello! Need some advice. My Ideapad s10e abrupt does not start. No coolers, no POST, nothing, just black screen and silence. The last time worked perfectly well, not fell, a no overheating, no had no any liquid spilled on, doesn't have the standby mo

  • Support JPEG

    Hello, I want to copy photos on Word that from Facebook and have no idea how to proceed. Have Windows XP, Microsoft Office 2003.  Photos are in JPEG format.