HP LaserJet 200 colorMFP M276n: HP LaserJet 200 colorMFP M276nw won't sleep

Similar Questions

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• HP Laserjet 200ColorMFP M276nw: PCL XL Error, HP LaserJet 200 ColorMFP M276nw, Windows 8.1

  Printer: HP Laserjet ColorMFP M276nw 200

  Installation: cable network using the complete package PCL6 (last available online)

  OS: 8.1 64-bit Windows

  Problem:

  When you print to some programs (for example the Page of Test, Microsoft Word), the printer prints a page with the following text:

  PCL XL Error

  Subsystem: kernel

  Error: IllegalTag

  File name: kernel.c

  Line number: 1921

  Printing from Notepad works very well. Printing on other computers on the wired network is working properly.

  Troubleshooting steps:

  1. Updated firmware update
  2. Uninstall, and then reinstall using the latest version of the software available online
  3. Changing to optimize for the text on the Advanced tab.

  Thank you for your help.

  As explained above, it could be a fault of the driver, or intermittent corruption by the hardware, or (as http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 says) the result of a recent update of AVG anti-virus.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• I got a HP LaserJet P1006. They won't let me install. I just got a new pc. and I was installing in the new pc.

  I got a HP LaserJet P1006. They won't let me install. I just got a new pc. and I was installing in the new pc... It of getting so far and keep coming back me and I do and then click Next. Then her ' tell me to go back...

  Hello

  What is you get the exact error message?

  You have the required drivers for the printer?

  If you have problems installing a printer, or if you have added a printer but are unable to use it, you need to maybe install or update the printer driver so that it is compatible with the version of Windows you are using.

  Some drivers that come with Windows, are available through Windows Update, or are registered on your computer through the hardware installation process and are ready to install. In other cases, you will need to install the drivers using a CD or DVD provided by the manufacturer of the printer. To install these drivers, follow the steps to use the Printers folder. If the driver you need is not already stored on your computer or if you do not have a CD or DVD, try to search the website of the manufacturer of the printer to see if you can download and install from there.

  I recommend you go through the manual supplied with the printer first. The manual includes the steps that will lead you through the installation process.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01179194&tmp_task=setupCategory&LC=en&DLC=en&cc=us&product=3435684&lang=en

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software Internet.

   

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Let us know if this helps

  Concerning
  Anthony.

• HP Laserjet Pro 200 ColorMFP m276nw stopped printing

  I installed the all-in-one color HP Laserjet Pro 200 m276nw a couple of months and configure for network printing. So far, it works perfectly for everyone in my house. Whenever I try to print, nothing happens. Can print other in my house that are on the network. When I go to the print queue dialog box, I get the message: "printing - the printer is unresponsive." If I go into printers and faxes application in system preferences, it shows this printer as inactive. I tried to restart my laptop (Macbook Air), turned the printer market, turned Wi - fi market, enabled Bluetooth market, even tried to connect to the printer via the cable. What can I do else?

  Hi Robvale,

  Welcome to the HP Forums!

  From what you described, it seems that the print job do not leave the print queue. I've included the document 'cannot print? Print jobs are stuck in the print queue'. Please select your version of Mac and follow the steps listed.

  If you still have problems after that, please provide me the version of Mac OS X, you're running. I've included the document 'find your OS X version and compilation of information', if you need it.

  Impatience on your part.

• problems of Config on HP LaserJet 200 colorMFP M276nw e-mail

  Hello

  I'm trying to set up my scanning to e-mail via the web interface of the printer (from my Mac).

  I get my information from e-mail server exactly as my e-mail client is configured, but when I test, I get the following error:

  Cannot resolve the SMTP server. Check this setting with your system administrator or your Internet service provider.

  The specified server is smtp.cogeco.ca and port 25.  No authorization is required (Cogeco is my ISP, and I'm on their network).  I can telnet to the server of my Macbook on port 25 and both my Macbook and the printer are connected to the Cogeco network using the same WiFi router.

  I can scan to a network folder in my local network without any problems.

  I'd like to get the scan to E-mail feature works, but without details of the connection problem, I do not see how to do this.

  Any suggestions?

  Hi Spin2Win,

  I appreciate that you try to configure the scan to e-mail.

  I'll be happy to help you.

  I have provided a document for how Scan: from the control panel. Select Scan to an email.

  If you're still having problems, then go to the printer's built-in Web server by typing in the IP address of the printer in your web browser.

  Click the network tab, and then click config IP4 on the left side.

  Click on the network (IP) address

  Select Manual.

  Type in the information and the IP address of the printer.
  Set the Configuration to manual DNS address.

  Set the default address as 8.8.8.8
  Set the e-mail address alternative as 8.8.4.4 and confirm the changes.

  Try the implementation again.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• LaserJet 200 colorMFP M276nw: unable to connect to the domain for the IP address. (Wired)

  Initially, I didn't have a drop of lan available to connect this printer to the network so I connected directly to a computer.  I recently purchaced a network switch and connected the printer and the computer to the network through the switch.

  Now the printer is not joining the domain and is not assigned an IP address of our domain.   When I run the network on the printer IPv4 TCP/IPv4 summary and the default gateway assigned is 6.173.243.184 should be 172.20.1.xxx for our domain.

  Lists network ID as NPI138751 hostname with no domain listed.

  The wired configuration netwrok lists as connected.

  Well the only thing I can think, if you have not yet done, are to reset the printer to Factory Defaults and try again to establish the connection.

• Color HP Laserjet Pro 200 M251n does not in Sleep Mode

  Printer: HP color Laserjet Pro 200 M251n

  Firmware: 2014-06-04, Version 20140521

  Problem:

  Since the last update Firmware the printer does not sleep/wake no event (all configured to wake up the printer) will wake up the printer. Even to connect via Webinterfac the printer does not respond. Ping also fails.

  Tried to connect the printer to the printer ports / wall plug changed network cables nothing worked.

  The only solution is to reset the printer (power off / on) to get the printer working again.

  Played a bit with the EcoSmart configuration, but little matter what is selected it its always the same as the printer stuck sleep/sleep mode and don't responde.

  Y at - it somewhere the old FIrmware to download to try a downgrade if it would help?

  I really don't think there is anythink else I could try.

  just to confirm that the last Firmware update solves the problem

  If I remember correctly it when, one day in December when it came out

• Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

  Kindly help, I tried to update the firmware, but still my web services will not turn on.

  RGS

  G

  Hi GayleneC,

  Thank you for the update and additional information.  I really appreciate it.

  You indicated that you tried to update the firmware, I wonder because the printer is not connecting to web services that is may not have logged in to check the updates of the firmware.  I have included two links, one is for the Windows of HP LaserJet Pro Series Firmware Update Utility version , the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose your operating system and we will try and update the firmware without using the front panel of the printer.

  After you run the firmware update utility, please disable IPv6 wireless via built-in web server.  Please follow the steps below:

  1. To open the HP embedded Web server, type the IP address of product in a Web browser address line. When it opens, it should look like the screenshot below.
     
     
  2. Please click on the 'Network' tab as highlighted in the screenshot above.
     
     
  3. Please click on 'Advanced' in the side menu on the left as indicated above. Please disable IPv6 and click 'apply '.
     
     
  4. Please click on the "HP Web Services" tab.
     
     
  5. Please click on the button "activate". Print the newsletter of Web Services.
     
     

• LaserJet pro 200 MFP M276nw display is not in English.

  Can not understand how to change the display to English.  I tried key wrench.  Everything that

  in a foreign language. (Chinese)?

  I go on-line at the library of service you can view the control panel in English. I hope this will guide you through the Panel so that you can reset your language to the language you need.

  Service library

  Printers/Multifunction - Laserjet MFP/AIO - find your printer (M276)

  Scroll down below the screen and get together and set up

  Another window opens with a video - select set language.

  English is the language first in the list.

  If this does not work, here are the lists of the screen:

  System set up (first screen, first choice) - language (top selection on the screen) - English (first choice in the list)

• Color LaserJet pro 200 M276nw: color LaserJet pro 200 MFP M276nw network installation problems

  Set up the printer correctly. Has chosen to use the Wifi option. Wireless computers are able to print to it without problem. Went do my first scan, and it tells me to set up printing to the network drive. So I will do this, and the software HP on the host computer (with USB connection) told me that it can configure not unless that is the printer is connected to a network.

  Obviouslly, it is connected to a network...

  Then disabled Wifi. Is turned off the printer. It connected to the router. Running. And still get the error message. Besides, cannot be found in the menu of the printer (on printer) where I can "setup" a wired connection.

  I'm a nerd of the computer, but for some reason i gots the mute today. Some advice would be appreciated - about the printer that is.

  Oh. You say to add the printer a network rather than USB printer. DOH. So simple. Thank you!!!

• MFP HP Laserjet Pro 200 color M276nw

  How to scan up to 30 or 50 pages at a time, good quality yet NB a size compressed for assignments with this printer? I have HP LJ200 M276 Scan.  I also have the Readiris Pro 12 software provided with the product, but the quality and compression is not to be reckoned with Readiris. Surely I don't have to splash out for another scanner?

  Also, I don't seem to find the quantity of sheets you can load in the ADF (document feeder).

  Hi T3L,.

  You could try a Third Party Software.

  Depending on what you do with the file later, you can scan at high resolution and then compress the file zipping it. Similar to the use of Winzip software.

  Sorry, I hope this helps.

  Thank you.

• Range of printers LaserJet color multifunction m276nw 200

  Why my photos are coming out so dark?  What is a print setting I need to do?  I use Kodak paper. I use Windows XP

  Have you done the paper type and quality are defined in the printer preferences?  I would recommend setting for the correct photo paper type and use the best quality.

  Thus, there is a document with the steps to solve the problems of print quality with the M276nw, found here.

  One thing you might check is to move the image on a USB key.  The printer has a USB port on the front and try to print the photo here.  What is quality appear different from stick memory direct vs PC?

  Let me know how it goes.