HP LaserJet 200 colorMFP M276n: printer don't wake up when the print job received

Similar Questions

• HP LaserJet 200 colorMFP M276n: HP LaserJet 200 colorMFP M276nw won't sleep

  HP LaserJet 200 colorMFP M276nw'm not going to sleep no matter how configure configuration.

  It ' on an Ethernet cable. WiFi and FAX are disabled. No local USB not connected. LCD Panel and web access see the that he was put to sleep after so many minutes of inactivity.

  He used to go to sleep, that is the LCD screen is off and the power LED flashed, as expected after the period button inactive specified, 15 min...

  I'm not 100% sure, but I guess it started showing this symptom as I replaced the black cartridge with a genuine HP one. Nothing has changed, and I doubt that if the issues of the cartridge. I've updated the firmware to 20150212, but no help.

  When I tried to update the firmware locallly, the LCD panel said he is not able to connect to the server even though it is perfectly on our LAN and connected to the Internet. For example I can scan documents to send to e-mail addresses.

  All attempts resulted negative. So I have a chat session with a HP tech support but it could not solve the problem. In addition, there was a much more serious problem with the printer which toners all came out with less than 100 printed pages. However, HP has launched a warranty replacement process and I'm waiting for the forthcoming replacement.

  Thank you, John, to remind me of important base of troubleshooting by isolating the problems one by one!

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• HP Laserjet 500 colorMFP M570d: printer HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present.

  HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present. Effects of several operating system platforms; 10, 7, 8.1, 2012 R2 server.

  We have this printer is installed on a server for printing on 2012 R2 server configuration. Everything works fine until today. The status on the side of things, regardless of the OS, OS shows the printer status is "on paper". Paper has been confirmed in the printer, cleaned rollers, test pages, copy made, etc. When you submit a print job, the State remains the same, just, the job is in the queue and does nothing.

  Any help would be appreciated.

  CRI_IT_guy

  When the software indicates out of paper, it's really tell you he lost communication with the printer. It could be a server problem.  To test since you already know that the printer works would print a printer configuration page and using the printer ip address set up on top of one of the computers as a local tcp/ip printer without going through the server, so the computer prints directly to the printer.  If it works, then your issue is network or linked servers.  Make sure that the address of the printer has not changed and also make sure that the spooler is running on the server.

• LaserJet 200 M276nw works for a week or so starts the initialization of all 5 minutes.

  Hi, I am now on my third laserjet 200 M276nw in less than a month. I have never seen any company as incompetent as HP... nobody can understand this, what I have available is Indian phone centers... they just read and re-read the same scripts for me again and again and want to replace my laser printer new, expensive with a refurbished. I just want one that works and is not "initialize" every 5 minutes on the minute, it is more accurate than Big Ben, but never stops never whining and squealing, day and night. I'm running out of options, HP is about to lose my business forever... won't let my day 30 trial jump in their 1 year warranty or I'll be stuck with a renovated / someone else's problem.  Must be something simple or something I am not, read everything I can find, but apparently, this happens only to me? WEIRD, I can't get 3 'or MORE' of a defective product in a row.

  ANY IDEAS or HELP would be appreciated.

  Thank you.

  CAPER

  I think I knew, still on trial with her, could happen again. I found that when I unplugged my router that you suggested, and off the printer. Then turn on the printer and then to restore the wireless router, it seems to last a while on the first try anyway. Now it's been about 6 days and everything seems always very well.
  Could happen again, but if I can get a week or more out of it, I'm happy.

  Thank you dansdad.

  Kudos to you.

• M1132 don't wake. When I hit the button start-stop, but it then doesn't not scanner/photocopy

  Hello

  I just bought this Laserjet M1132 MFP.

  He goes to sleep and the next time, it won't wake up. I jiggle with all the buttons on the machine, without exploitation. I use win8. Preferences has nothing on the sleep options.

  When I click on one = off button shut down shut down and restart, it prints. But then it doesn't scan or photocopy antything, it does not do anything, just blank pages.

  I need to plug in the printer power cable off, hang it upwards again once, and then it works.

  Really frustrating feature

  Well, directly plugin was not the solution. I updated the win8 Office and downloaded and updated the firmware of the printer from the HP website.

  Now he'll still sleep and yet not wake when I have something to print, send, but hit the on/off button wakes up the computer and it scans and photocopies now after the update of the firmware and update the computer.

  Thus, no congratulations, but thanks

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• HP Laserjet 200ColorMFP M276nw: PCL XL Error, HP LaserJet 200 ColorMFP M276nw, Windows 8.1

  Printer: HP Laserjet ColorMFP M276nw 200

  Installation: cable network using the complete package PCL6 (last available online)

  OS: 8.1 64-bit Windows

  Problem:

  When you print to some programs (for example the Page of Test, Microsoft Word), the printer prints a page with the following text:

  PCL XL Error

  Subsystem: kernel

  Error: IllegalTag

  File name: kernel.c

  Line number: 1921

  Printing from Notepad works very well. Printing on other computers on the wired network is working properly.

  Troubleshooting steps:

  1. Updated firmware update
  2. Uninstall, and then reinstall using the latest version of the software available online
  3. Changing to optimize for the text on the Advanced tab.

  Thank you for your help.

  As explained above, it could be a fault of the driver, or intermittent corruption by the hardware, or (as http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 says) the result of a recent update of AVG anti-virus.

• LaserJet 200 colorMFP M276nw: unable to connect to the domain for the IP address. (Wired)

  Initially, I didn't have a drop of lan available to connect this printer to the network so I connected directly to a computer.  I recently purchaced a network switch and connected the printer and the computer to the network through the switch.

  Now the printer is not joining the domain and is not assigned an IP address of our domain.   When I run the network on the printer IPv4 TCP/IPv4 summary and the default gateway assigned is 6.173.243.184 should be 172.20.1.xxx for our domain.

  Lists network ID as NPI138751 hostname with no domain listed.

  The wired configuration netwrok lists as connected.

  Well the only thing I can think, if you have not yet done, are to reset the printer to Factory Defaults and try again to establish the connection.

• HP Laserjet 200 M276 MFP printer is not printing in color

  I'm trying to get my printer to print in color, but I only get out, not in the least blue colors to print.

  Any ideas what could be the cause?

  FYI: I use original HP toner

  Thank you

  Yvonne

  Welcome to the Forums of HP YHendrikx,

  By your post, I see that you have found only output blue.
  I can help you with this problem.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  I have provided a document through the steps to see if she will help solve this problem.

  Troubleshooting print quality problems.

  Please provide detailed results if you're still having problems.

  What are the results of the supplies status page and the print quality page?

  Good day!
  Thank you.

• problems of Config on HP LaserJet 200 colorMFP M276nw e-mail

  Hello

  I'm trying to set up my scanning to e-mail via the web interface of the printer (from my Mac).

  I get my information from e-mail server exactly as my e-mail client is configured, but when I test, I get the following error:

  Cannot resolve the SMTP server. Check this setting with your system administrator or your Internet service provider.

  The specified server is smtp.cogeco.ca and port 25.  No authorization is required (Cogeco is my ISP, and I'm on their network).  I can telnet to the server of my Macbook on port 25 and both my Macbook and the printer are connected to the Cogeco network using the same WiFi router.

  I can scan to a network folder in my local network without any problems.

  I'd like to get the scan to E-mail feature works, but without details of the connection problem, I do not see how to do this.

  Any suggestions?

  Hi Spin2Win,

  I appreciate that you try to configure the scan to e-mail.

  I'll be happy to help you.

  I have provided a document for how Scan: from the control panel. Select Scan to an email.

  If you're still having problems, then go to the printer's built-in Web server by typing in the IP address of the printer in your web browser.

  Click the network tab, and then click config IP4 on the left side.

  Click on the network (IP) address

  Select Manual.

  Type in the information and the IP address of the printer.
  Set the Configuration to manual DNS address.

  Set the default address as 8.8.8.8
  Set the e-mail address alternative as 8.8.4.4 and confirm the changes.

  Try the implementation again.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• Laser Jet Pro 200 M251nw color: print job stuck in the queue

  I have problems with my color Laser Jet Pro 200 M251nw. I can print a MS word document and the printer works fine. When I try to print a second document MS word, that work remains stuck in the tail (spooling). I can't remove it from the queue. If I restart the computer, it went from the queue. If I print another document the process starts again. I know the procedure to remove a document from the queue but what I need to know is how to prevent them from getting stuck.

  Hello

  Please try the solutions in this doc.

• Manual configuration of the proxy don't glue - don't stay - pass when the tabs.

  Suddenly, in the 27 new FF, when I manually set a proxy, it turns off (goes back to the 'No proxy') when I tabs or open a new tab. He used to stay up until I turned it off. I want him to stay through all the tabs up to what I turn it off, as he used to do. Also, I have this problem, if I use fast Proxy.

  Any suggestions? Thank you.

  There discover research. The problem goes away when the search discover is disabled. Too bad - it is a good and useful app.
  Can I ask you to contact them to ask them to clean it up?