HP Laserjet 200ColorMFP M276nw: PCL XL Error, HP LaserJet 200 ColorMFP M276nw, Windows 8.1

Similar Questions

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• HP LaserJet 200 colorMFP M276n: HP LaserJet 200 colorMFP M276nw won't sleep

  HP LaserJet 200 colorMFP M276nw'm not going to sleep no matter how configure configuration.

  It ' on an Ethernet cable. WiFi and FAX are disabled. No local USB not connected. LCD Panel and web access see the that he was put to sleep after so many minutes of inactivity.

  He used to go to sleep, that is the LCD screen is off and the power LED flashed, as expected after the period button inactive specified, 15 min...

  I'm not 100% sure, but I guess it started showing this symptom as I replaced the black cartridge with a genuine HP one. Nothing has changed, and I doubt that if the issues of the cartridge. I've updated the firmware to 20150212, but no help.

  When I tried to update the firmware locallly, the LCD panel said he is not able to connect to the server even though it is perfectly on our LAN and connected to the Internet. For example I can scan documents to send to e-mail addresses.

  All attempts resulted negative. So I have a chat session with a HP tech support but it could not solve the problem. In addition, there was a much more serious problem with the printer which toners all came out with less than 100 printed pages. However, HP has launched a warranty replacement process and I'm waiting for the forthcoming replacement.

  Thank you, John, to remind me of important base of troubleshooting by isolating the problems one by one!

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• problems of Config on HP LaserJet 200 colorMFP M276nw e-mail

  Hello

  I'm trying to set up my scanning to e-mail via the web interface of the printer (from my Mac).

  I get my information from e-mail server exactly as my e-mail client is configured, but when I test, I get the following error:

  Cannot resolve the SMTP server. Check this setting with your system administrator or your Internet service provider.

  The specified server is smtp.cogeco.ca and port 25.  No authorization is required (Cogeco is my ISP, and I'm on their network).  I can telnet to the server of my Macbook on port 25 and both my Macbook and the printer are connected to the Cogeco network using the same WiFi router.

  I can scan to a network folder in my local network without any problems.

  I'd like to get the scan to E-mail feature works, but without details of the connection problem, I do not see how to do this.

  Any suggestions?

  Hi Spin2Win,

  I appreciate that you try to configure the scan to e-mail.

  I'll be happy to help you.

  I have provided a document for how Scan: from the control panel. Select Scan to an email.

  If you're still having problems, then go to the printer's built-in Web server by typing in the IP address of the printer in your web browser.

  Click the network tab, and then click config IP4 on the left side.

  Click on the network (IP) address

  Select Manual.

  Type in the information and the IP address of the printer.
  Set the Configuration to manual DNS address.

  Set the default address as 8.8.8.8
  Set the e-mail address alternative as 8.8.4.4 and confirm the changes.

  Try the implementation again.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• LaserJet 200 colorMFP M276nw: unable to connect to the domain for the IP address. (Wired)

  Initially, I didn't have a drop of lan available to connect this printer to the network so I connected directly to a computer.  I recently purchaced a network switch and connected the printer and the computer to the network through the switch.

  Now the printer is not joining the domain and is not assigned an IP address of our domain.   When I run the network on the printer IPv4 TCP/IPv4 summary and the default gateway assigned is 6.173.243.184 should be 172.20.1.xxx for our domain.

  Lists network ID as NPI138751 hostname with no domain listed.

  The wired configuration netwrok lists as connected.

  Well the only thing I can think, if you have not yet done, are to reset the printer to Factory Defaults and try again to establish the connection.

• Cannot print from Internet Explorer 11 using HP LaserJet 200 color on Windows 7

  Who would be able to help me?

  When I want to print using Internet Explorer 11 on a Windows 7 PC, I can select Preview before printing, but when I actually want to print, it gives the error:

  "There was an internal error and Internet Explorer is unable to print this document."

  This error only occurs when the 200 HP LaserJet color is selected.

  I am able to print on our other HP printers, like the HP Color LaserJet CM4540 multifunction printers.

  I am also able to print on a printer using Chrome.

  If the problem seems to be related to Internet Explorer 11 in combination with 200 HP LaserJet color.

  I tried the 'standard' measures to resolve the issue, such as:

  1. disable Internet Explorer Protected Mode

  2. the value Internet Explorer default browser

  3 re-create the missing bass folder and define the level of integrity

  4. start Internet Explorer as an administrator

  This does not resolve the issue.

  Please notify. Thanks in advance.

  It is a problem with IE 11 on Windows 7 systems with no fix yet against MS.

  The following thread has had a problem like yours:

  http://h30434.www3.HP.com/T5/other-printing-questions/printing-stopped-working-in-IE11/TD-p/3549605

• Re: Error Dell Vostro 200 - at startup: "Windows XP cannot start."

  When I turn on the PC, the following text is displayed:

  Windows XP cannot start, load needed DLLs for kernel.

  During the installation of Windows: File\i386\halaacpi.dll could not be loaded. the error code is 7. Implementation cannot continue.

  Hi MzJo,

  1. Did you the latest changes on the computer?
  2. You are able to boot into Windows after the error message?
  3. When was the last time it was working fine?
  4. You have security software installed on the computer?
  5. You try to install or upgrade to Windows XP?

  See the articles below and check if it helps.

  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

  http://support.Microsoft.com/kb/812450

  Error message: Windows did not start because of an error in...

  http://support.Microsoft.com/kb/326671

  Windows XP problems with damaged or incompatible hardware

  http://support.Microsoft.com/kb/330181

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• HP LaserJet 200 colorMFP M276n: printer don't wake up when the print job received

  Hello

  The all-in-one printer in my company does not work well as it does already.

  He supposed to wake up when receiving print jobs, but it doesn't. Tap the user Panel must then only it starts to print. After that the user can do another trouble-free printing. We have setup this printer on LAN and I checked the console EcoSmart that all wake up on the events are checked. (i.e. USB, LAN, contriol Panel & fax ring).

  Another thing I found is the ink cartridge 2 have low supplies, do not know if this is causing the problem, however.

  Pls advise me what will be the possible causes?

  Thank you.

  CC

  Hi Sabretooth04,

  Thanks for your sharing.

  Just to inform that my problem is resolved by changing a new ink cartridge.

  So probably because the small amount on cartridge a message pop up in the users and once this last conrol touch she will continue printing.

• EPrint registration don't DO NOT WORK in HP Laserjet 200 M276 PCL6

  I bought this printer and its only to be able to print on the shot, but the Web ePrint service or better allow the same won't work.

  The printer is HP LaserJet 200 colorMFP M276nw PCL6, serial number is CNF8G6S398, the support of the computer is a notebook of EEE from Asus with Windows 7 Home Premium Service Pack 1.

  Update the firmware to version 20140521 (version 20140718 does NOT work) to see if it was a problem of firmware, the problem remains the same, it does not via the Server Web integrated in my browser, either from the control panel of the printer, this code, you may not have.

  The printer works regularly in the local network, here in this link all the configuration parameters (the firmware has been updated as shown in the link is old, but the rest of the configuration is the same).

  https://drive.Google.com/file/d/0Bx7PIMyN30XKenQ5YnJSbkFLQzA/view?USP=sharing

  I'm really frustrated, three days of work without being able to allow that the only feature I really needed.

  Problem solved by Jerebko (very thanks) to this thread

   

  http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Eprint-amp-LaserJet-Pro-276nw/m-p/4738076/highlight/false#M115390
  

  

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• HP Color LaserJet 4550: HP Color LaserJet 4550 PCL XL error

  I use this printer for years.  It works beautifully.

  Windows 10 has just done an update & the printer driver disappeared.  I use this printer with a HP Jet Direct J4135A usb card.  Now any driver or what I do I try to install or use, I get the same error message.

  I am trying to use the printer driver's upd-pcl6 - x 64 - 6.3.0.21178.exe.  The printer driver appears in the settings & is by default we & they say that everything works correctly.

  Can you help me please?  I don't want to go out and buy another printer.

  PCL XL error

  Subsystem: KERNEL

  Error: UnsupportedProtocol

  Operator: 0x0

  Position: 0

  Found the solution for everyone that might have this problem.

  Just right click on the printer icon in the Device Manager and select printer properties / Advanced / change & driver driver HP Color LaserJet 4550 PCL6 ranking to HP Color LaserJet 4550 PCL6 and click OK.  That's all there is to it.

  Now, it will work with USB (HP Jet Direct J4135A Card) that is not supported, instead of just supported network.