HP laserjet 2300 dtn

need help replacing roll in the third set. Is anyway to get a diagram

Hello wsbowles1,

You need to replace the roller for the third set.

Here is a link to your service manual that will help you.

By clicking on the White Star congratulations on the left is a way of saying thanks!

I would like to know how everything goes.

Nice day.

Tags: Notebooks

Similar Questions

  • My Laserjet 2300 allow XP and Windows 8 - 2 computers connected to it?

    Assuming that I can download a driver from Windows 8 for my Laserjet 2300, I always will be able to print from my old XP computer, also hanging on to her?

    Yes. The driver will not be installed on the printer, it will install on the PC. This means that as long as each PC (Win 8 and XP) has its respective drivers, they both should print without problem. And it looks like there are Win 8 drivers for your printer. You can get by following the link below. Make sure to enter the full name of the printer to get the correct drivers, that there are a several versions of the LJ 2300.

    http://goo.GL/BVOOg

  • printing from Mac to HP Laserjet 5100 dtn without internet

    Hello

    I have a Mac Book Pro using OS X 10.5.8 and a HP Laserjet 5100 dtn. There is no Internet in my room. Is it possible to send files using an ethernet straight cable on my printer? How can I print? Thank you for your help.

    Christian

    Yes, that's a bit what I thought would happen.

    You have a router wired or wireless?  It should not be connected to the Internet to work.  It will assign the printer an IP address and your Mac will be happy.

  • HP Laserjet 2300: HP 2300 printer won't print after basic troubleshooting

    My HP Laserjet 2300 print order and does not meet the print commands. I use an iMac running OS 10.7.5

    Action taken:

    1. the cables.

    2 printer can print pages of the printer itself.

    3. check the software updates.

    4. set the printing systems 4 X

    5. repair disk Ran twice.

    The printer is still on which the print command.

    I think that the usb port on the printer has gone wrong.  You can try adding a jetdirect eio card and attach the printer via ethernet to your router or switch if you have one.  Cards can be purchased on ebay for about 10:00.  Look for the HP 600N, 610N or 615N.

  • HP Laserjet 2300: HP Laserjet 2300 does not not with El Capitan

    Since the update of OSX El Capitan, my laserjet 2300 does not work properly. I have no problem with my Brother printer, though. It must be something in the driver software. How can I slve; where can I find the updated driver software?

    The recent update of the El Capitan 10.11.4 seems to fix the problem. HP Laserjet 2300 works as before! It's a shame, it took this long and caused a load of annoyance with many people!

  • Cannot install the printer HP LaserJet 2300 on Windows 7

    original title: I have a question

    Morning

    I tried to configure my computer to 32-bit windows 7 on Hp LaserJet 2300 printer, but it does not work. Please help me

    Did you get the drivers from here?

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=238802&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=238800

    Otherwise, you have to...

  • HP laserjet 2300

    Hello

    I have 2 computers and a printer HP laserjet 2300, one with win7 32 bits and the other with win7 64bits. Can you provide me with a link to the drivers/software for computers: 32 and 64 bit?

    Thank you

    Joel

    I'll be happy to help you with this problem.

    Here is a link that can help with this.

    http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&task=&tool=&query=HP+LaserJet+2300

    I hope this helps.

  • LaserJet 2300: Laserjet 2300 horizontal streaks

    Hello

    We have a 2300 Laserjet that works very well. That the cartridge is empty, we bought the spare cartridges which are officially HP 10A (Q2610A) 2300 series voor.  After we started making copies again, but they came out with a lot of black horizontal stripes, so almost a black page, which makes it almost impossible to read anything. When we gave the old man a (almost empty), we could make another copy with ink on the left and the copy was perfect once again. Put the new one in, even black streaks. As we thought that maybe this cartridge was defective or has been damaged, we decided to open the second cartridge we bought, but without success. Also of black streaks. And the former providing perfect copies. So does that mean? If we have forgotten something? Is something with the new cartridges?

    Hope someone can help us.

    Best regards, Luc

    I don't know where you purchased the cartridges. Since this is now an old printer, it is possible that you got of the toner cartridges that are obsolete and not stored properly. They have the wiper blades that can go wrong when not stored in correct temperatures. If HP original back instead of purchase for refund or Exchange. Something tells me that you probably bought toners on ebay then you can be out of luck. Also the box they came in should be black and white. So blue and white you got very old ink cartridges.

  • How to install HP LaserJet 2300?

    Original title: hp 2300 laser jet

    How c alter hp laser jet 2300 to collect?

    How c alter hp laser jet 2300 to collect?

    Hello

    Your best resource is HP.

    HP drivers & support | United States:
    http://WWW8.HP.com/us/en/support-drivers.html

    You can also check on the Forums of HP Support for other users who may have solved that problem.

    HP - HP Support Forum Support Forum:
    http://h30434.www3.HP.com/PSG/

    Concerning

  • HP LaserJet 3800 DTN optional tray 3 will not open (but empty)

    I have the optional tray 3 for a HP 3800 DTN laserject

    3 tray does not open.

    I have removed the printer and cannot open it.

    It appears that on the left side has some kind of catch which will not be shared. I say this as wel I try to open the drawer, it tilts to the left (the right tries to get out but the left side crashes upward).

    Please notify.

    I solved the problem myself.

    There are 4 feet at the bottom of the tray 3 optional. The 2 to the front of the unit have screws. I removed the screws and waved the units of feet that double as guides of drawer slide. Once both have been removed, the sliding drawer.

    The problem was spring loaded pressure feeder had been stuck in a State more compressed inside the drawer box. The guides of slide based feet have a trigger output on them which frees pressure loaded spring trough when the drawer is pushed into the tray of the firm. The spring loaded drawer charger never push completely compressed while the inside of the cabinet drawer, and outside the cash drawer. If the spring supply pressure responsible is locked in it more compressed position inside the cabinet drawer it cannot slide past the release trigger wihtout withdrawal based foot feet.

  • LaserJet 2300: Printer error status

    Printer is displayed in the error state. Reinstalled the drivers, powercycled the printer and rebooted the computer several times. Question began with the last update of Windows 10.

    How is the printer connected?  If this is a known issue with the last update 10 windows parallel port.  Go to Device Manager and in the tab change the Port settings to "never use an interrupt" to one of the other options.

  • HP LaserJet 2300 Series Firmware update failed

    Hi all

    After that I loaded a new firmware for my printer it still keeps asking me to install the new firmware. There is nothing else I can do with the printer. I (tried) to install the firmware over the network.

    When I run the printer the display shows the following:

    "Download file now" - Download now
    "Return the RFU upgrd" - send rfu upgrade

    Before the error, I followed the instructions in the Readme attached the new firmware and sent the command ' copy/b lj2300fw_04.050.2.rfu \\i7\hplaserj' to the printer on the network which confirmed that "1 file (s) copied".

    The printer does not respond to Windows or Mac OS all over and is shown as offline in Windows.

    When I try to reload the firmware there is simply nothing but I still have the confirmation "1 file (s) copied"

    Thank you in advance for your help!

    To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

    I hope this helps!

  • LaserJet 2300: Laserjet cartridge Expiration Date

    Hello.

    I bought a carton of 10 a flea market-but-sealed for this printer.  According to the manual, the life expectancy of a cartridge that is not used is 2.5 years.  This is useful information, but it isn't, because I can't find a date of manufacture on the packaging.

    I've even opened the bag.  Perhaps on the cartridge, or elsewhere?

    And what happens if the cartridge is middle-aged?

    Thank you kindly.

    The expiration date is usually on the box which contained the cartridge. Depending on how the toner has been kept, it might be years 2.5 or 10 years. The only thing that is wrong with a toner expired is the wiper blade to spoil over time and you usually find in the 50 first printed pages. Since you already bought it I would use it as soon as possible in order to limit the possibility of the blade goes wrong.

  • Waiting for tray 2 to lift? (color laserjet 5500 dtn)

    Printer displays the message "waiting for tray 2 to lift", also said that it is to treat the work but nothing is printing. Help please!

    The trays are lifted audiences on these, you might be able to go back, look at the back of the status bar (with a blowtorch), see if the tray is thrown.

    If this isn't the case, then check that the tray is not damaged, if it is OK, then you can change the paper pickup unit.

    The drive to lift for tray 2 is there.

    This is for the RG5-6670-110CN 5500.

    You can remove it but to replace the whole unit is only 2 screws and it comes out of the box the cartridge before, so it's a quick repair, not requiring no not a high-level engineer.

  • Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

    Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

    What I've tried so far:

    Installed the latest drivers > unsuccessfully

    Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

    Have any suggestions what to do next?

    Update: the solution provided in this thread solved my problems:

    http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

     

Maybe you are looking for

  • How can I get a paper copy of my favorites

    I'm going to buy a new computer & re - transfer my existing bookmarks. What is the best way to do it?

  • Save as default clusters

    Hi allI'm stuck in a small problem and need a bit of help from you.In my application, I have a Subvi, which will have the parameters required for the user to run the program. These settings, I want to store it in a file (or other format) so that when

  • Removal of documents in the print queue - error message

    I'm unable to remove a document from the print queue - the status of a document is "deleting - error - printing".  Subsequent print jobs do not print due to this error.  If I select 'cancel all documents' all other jobs are deleted, but it is still t

  • The specified service does not exist as an installed service

    Recently I seem to have problem with every thing in my laptop under windows vistas. When I try to open any program such as device 1 Manager) 2) install/uninstall any program 3) manage computer 4) remove a printer, etc., it gives only the error "the s

  • NWM map does not show TV

    When reinstalling my router problems, I added the devices wireless, laptop, printer and TV (6050 Samsung Smart TV). Everything appears on the NWM except the TV card.  I turned on when adding it and updating the map, several times and it does not appe