HP LaserJet 400 ColorMFP M475D: HP equipment MIB (Management Information Base)

Similar Questions

• HP LaserJet 400 ColorMFP M475D: Where I found the Documentation MIB?

  Hello!

  I'm trying to monitor a printer, a HP LaserJet 400 ColorMFP M475D and to move forward with what I need device MIB. Thus, the HP Forum help me with this information in the last month in this thread.

  But, MIB has a lot of information and I don't know what they mean. This type of file have a documentation? I just found the MIB repository, but they documentation I don't know.

  Could someone answer if it have a documentation?

  Thank you!

  The format of MIB data (for printers and other devices) follow a set of standards that is not defined by HP.

  A basic description of the MIBs print shops can be found in this document RFC 3085.

  It is not easy to read (don't expect any specification document to be).

  There are probably many applications available to help interpret the MIBs and how to use them with SNMP functions.

  It is not something I know a lot of things, so I can't recommend specific applications.

• HP LaserJet 400 colorMFP M475dw scan to E-mail problems

  Hi all!

  I would appreciate a solution to my agony.

  We recently purchased a printer HP LaserJet 400 colorMFP M475dw. Now, I'm putting in place (browser-> Scan--> the outgoing message profile administration) to send scanworks by e-mail but face the following problems:

  1. when it is correctly typed all the credentials, even the "Test & Save" option takes forever. After cople attempts I got it successfully tested.

  2. with the help of my personal gmail accout as the sender, sweeping work takes a lot of time. It stops in the phase connection smtp server for quite a long time before even starting the actual analysis.

  3 using the company newly created accounts of e-mail as a sender, it takes even more time. I timed it just 6 minutes and 23 seconds before the actual analysis.

  4. now, it seems to send the scan ok, but with some first attempts it failed with some general error message asking to try again.

  In my opinion, the time it takes is completely unacceptable. Is this a known problem and is there a workaround?

  Our company emails run on MS Office 365 and I use smtp.office365.com as server smtp port 587 and SSL/TLS ticked (tried also unchecked). As I said with Gmail, it would also slow but still very very very slow.

  Help, please?

  I know this is an old thread, but just in case anyone is still having problems with this - I managed to fix it by disabling IPv6 in network-> advanced in the web server administrator. Connect to smtp.gmail.com from 3 minutes + seconds.

• LaserJet 400 colorMFP M475dn: my printer will not scan

  The printer worked perfectly for yearsnuntil today when he not scanning to an e-mail saying: username or password is incorrect and to ensure the user name and password are valid. I never set up with security by password. I read the entire manual and cannot figure out what to do. I'm desperate, since I use this for my work. Thank you very much!!!

  Hi Helen,

  We gladly invite you.

  Please open the printer homepage, to open it click on the Configuration icon on the screen of the printer and select reports, then tap report Configuration to print a report.

  Locate the registered IP / IPv4 / URL in the network information section, then go to the URL from the web browser on your computer...

  Click Scan in the main menu, and then click e-mail profiles outgoing in the button left of andclick pane change to the active scan profile.

  Updated the SMTP password with your new password, check that the PIN in option values empty unless you do not want to set a 4-digit code to scan from the front panel (sometimes, the browser can automatically fill these).

  Click on save and test, and then allow the test complete the scan to e-mail function should work again.

  Kind regards

  Shlomi

• Regular Toner artifacts - nine LaserJet 400 colorMFP M475dw

  I recently bought and even more recently unpacked and set up a new M475dw. everything is fine, except... from the first impression of sample, there is a recurring point 15/16 "on the left side of the page. The first is 3/8 "down and he regularly repeats every 17/16" to the bottom of the page.

  He has recalibrated, I ran a cleaning twice page now. On the second page of cleaning, it is somewhat a repeat ghost of the dot at intervals of 1/8 ".

  Then... (I know... don't laugh...) What to replace and how HP to get one?

  Thank you, David.

  Here are the * resolution *.

  (A) I ended up posting a real problem with HP ticket.

  (B) the problem just disappeared... what combination of cursing, insistence and prick I was using just caused the thing to disappear.

  (C) a representative of HP is actually called to discuss the problem and propose solutions

  (in that order).

  So: Problem solved. AND... mea culpa... all my preemptive whining about the product and the supposed lack of service were indeed premature.

  Next printer in my 25 years of printer channel buy...? Yet HP.

• LaserJet 400 ColorMFP M475dw: Problem of power cord for m745dw multifunction color HP LaserJet Pro 400

  I'm trying to find the number of pieces of the electric cable.

  My warranty expired on 6 December 2014.

  My power cable is flaky.

  When I move a bit the the line cord with the output plug, my printer would turn off and turn on again.

  If I move the power cord a little by the power printer connection, power remains standing.

  Can anyone provide me with the part number of HP for the power cable?

  Thank you

  Yucaipa

  This printer uses a standard pc power cord.  All power cord printer or standard pc with 3 connections will work fine.  I just hope that it is the power supply cord and not taking on the printer.

• Given to zero cold/reset HP LaserJet 500 colorMFP M570dw

  Hello

  I clicked on the wrong country on the first installation of the printer.

  Now, I would like to correct the country, but the only way to change the country seems to bee if a cold reset/reset of the printer.

  How can you do a cold reset/reset with the printer HP LaserJet 500 colorMFP M570dw? I couldn't find the answer in the manual...

  Thanks for your replies

  GeHoGo

  P.S. This thread has been moved from Laserjet MFP and all-in-one - HP's Forums moderator

  What you need is a NVRAM or a Super NVRAM. Both will do the job for the same problem: initialization of memory NVRAM ATTENTION: all HP Jetdirect settings are also reset. Don't forget to print a Setup page before you perform initialization of the NVRAM. Make a note of the IP address that is listed on the Jetdirect configuration page. You must restore the IP address after a the NVRAM initialization. A the NVRAM initialization erases all data stored in the sections not protected from NVRAM. Perform initialization of the NVRAM resets the settings and the following information: ● all menu settings are reset to the factory default values. ● all location settings, such as language and national and regional, are reset to zero. After a the NVRAM initialization, reconfigure all computers that print to this product so that the computer can recognize the product. 1. turn off the product. 2 models of touch control panel: press and hold the lower quadrant right of the touch screen. Keep the depressed quadrant that you turn on the product. 3. when the Permanent storage Init. message appears on the screen, release the buttons. 4. when the product has completed the NVRAM initialization, it returns to the ready state. Super super initializing NVRAM NONVOLATILE initialization A restores the product for "generic" mode, in which you get at the factory. This means that you need to reset the language settings and country, when the product starts after initialization. A super NVRAM initialization erases all the data stored in the NVRAM protected and unprotected sections. 1. turn off the product. 2. press and hold the lower left quadrant of the touch screen. Keep the depressed quadrant that you turn on the product. 3. when the Permanent storage Init. message appears on the screen, release the buttons. 4 the super NVRAM initialization is completed, the product is in generic product mode.

• RESOLVED - "49 error turn off then" HP LaserJet 400 M451dn

  Last week, I set up not one but 2 printers HP LaserJet 400 M451dn color for a client. It was 2 because I went first to the provider think there is a fault with the printer showed a 49 error randomly, but when I got exactly the same error on the 2nd and the same printer with a different provider, I thought that this may not be the case.

  What I found was - I set up the printer with a static IP address of 192.168.0.218 and excluded this address in the DHCP reservation list, so it is not assigned to another device. If I turned on the printer without the LAN cable connected the printer would say "Ready", but as soon as I connected the LAN cable, it is when that would throw a wobbly and appear "error 49 - Turn off, then on. I tried to reset the default printer without joy.

  THE FIX here IS (or should I say a work around) in the following order:

  (1) remove the LAN / network printer cables.

  (2) to reset the default printer.

  (3) remove the the 192.168.0.218 of the server DHCP reservation.

  (4) delete the IP 192.168.0.218 Server lease.

  (5) connect the LAN cable to the printer.

  (6) can get a new IP address from the printer. Using the same IP address again you go back to step 1 again.

  (7) that's all.

  For some reason, this printer does NOT set a static IP address and put a reserve on the server. Nuts!

  I installed several HP printers that I have in the course of the years and never encountered this problem. As I mentioned above, this is more than a solution to a genuine problem...

  Hope you guys find this post useful.

  I had exactly the same problem with a M451dn of 400 LaserJet, except in a working group with the router making DHCP, use a static address outside DHCP for 2 days and then pool this week had error 49, noticed that when the Lan cable has been disconnected, he seems to have stopped. Printer changed to use DHCP and it works again. (updating the firmware via USB had no effect)

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• LaserJet 400 m401dn: HP Laserjet 400 m401dn, make wireless?

  Is it possible to buy a product to make the Laserjet 400 m401dn active wifi or is this product already activated?  The internet router is in another place, so a physical connection is not possible.  I would like the capability configure the SSID, etc. to connect and print.  Thank you.

  > Laserjet 400 m401dn wifi active or is this product already activated?

  The m401dn is a model of printer Dmodel Network (wire) connected.  The active WiFi model would be a M401dw , that would be the model Dand Wwireless.

  However, if you create a connection to your router via a wired Ethernet connection and then the printer would be accessible by wireless network devices.  All you need to do is get the printer on the network.

  > internet router is in a different location so a physical connection is not possible.

  The only options you have are to run a new cable at the location of the printer and Ethernet cable connect with the current hardware.

  Otherwise you would seek to create a 'bridge' between the printer and the router wireless network using a router without wire 2.  Configure the wireless router 2 to act as a client or to fill in the primary wireless router that acts as the main Point of access to the network.  Once the 2nd wireless router is filled in elementary school all the devices that are connected to Router 2 will be accessible from the main access point.

  There are guides out there circulating that walks you through this process, but the specific steps will have to come some 2nd router manufacturer, you can decide to experiment.

  Here is a sample of Cisco support article that calls this "Cascade" procedure one router to another:

  http://www.Cisco.com/c/en/us/support/docs/voice-unified-communications/SPA8000-8-port-IP-telephony-gateway/108678-PQA-108678.html

• HP laserjet 400: hp laserjet 400

  Whenever I have install new ink cartridges, he throws the alignment off the coast. It's like it prints twice, especially in color.

  It makes it almost impossible to read. I'm tired of paying a technician to fix this, every month. Help!

  HP LaserJet 400 color MFP M475fn

  Calibrate the product from the control panel
  1. press the Setup button.
  2. open the configuration menu of the system.
  3 open the print quality menu.
  4. open the menu of color calibration.
  5. tap the element calibrate now.

• Printing to HP Laserjet 400 M401N corrupt characters

  I just installed a new HP Laserjet 400 M401N and his corrupt characters printing. This often happens when I print pdf files.

  I ran the scrubber and reinstalled the drivers again, but it still does the same thing. Help, please. Thank you.

  The solution was to use a universal driver.

  Here are the XP x 86 one:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=5096252&prodNameId=5166603&swEnvOID=228&swLang=8&mode=2&taskId=135&swItem=ds-99375-4

  It is here is Windows 7 64 bit one:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=5096252&prodNameId=5166603&swEnvOID=4063&swLang=8&mode=2&taskId=135&swItem=ds-99376-4

• LaserJet 400 M451dn: laserjet 400

  I have a printer LaserJet 400 M451dn . There was a severe storm, but the printer is on a surge protector APC, including a printer HP LaserJet P1501n and other devices. All other devices operate normally.

  The LaserJet 400 M451dn printer when turned on, the symptoms are the following:

  • Noise of rattling all 4.5 sec
  • White LCD screen
  • no lights on the front panel
  • Ping address responds 'host unreachable '.
  • On printer Ethernet port are turned on

  Printer is on a network, local domestic and no software change or recent driver.

  I tried HP solutions but without success.

  Any suggestion is appreciated.

  ~ Pheeoo

  Hello @Pheeoo

  Think about replacement parts this its go device but you only have two options

  To display sound problem usually a combo that you need to get the trainer + Control Panel from one of the 2 could be the problem

  HP part dept store number its 800 227 8164

  The other option will be to return this printer for a discount for another product

  HP 888 447 0078 ext 813 solutions

  You can call them and see what they have to offer with this second option

• HP Laserjet 500 colorMFP M570d: printer HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present.

  HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present. Effects of several operating system platforms; 10, 7, 8.1, 2012 R2 server.

  We have this printer is installed on a server for printing on 2012 R2 server configuration. Everything works fine until today. The status on the side of things, regardless of the OS, OS shows the printer status is "on paper". Paper has been confirmed in the printer, cleaned rollers, test pages, copy made, etc. When you submit a print job, the State remains the same, just, the job is in the queue and does nothing.

  Any help would be appreciated.

  CRI_IT_guy

  When the software indicates out of paper, it's really tell you he lost communication with the printer. It could be a server problem.  To test since you already know that the printer works would print a printer configuration page and using the printer ip address set up on top of one of the computers as a local tcp/ip printer without going through the server, so the computer prints directly to the printer.  If it works, then your issue is network or linked servers.  Make sure that the address of the printer has not changed and also make sure that the spooler is running on the server.