HP laserjet 4100n - printing garbage after upgrade to Windows 8 and can not network

Hi everyone - I've recently upgraded to a new PC in Windows 8 and I have terrible problems with my printer HP Laserjet 4100, which worked perfectly before XP.

Question n ° 1

I had to get a parallel/USB cable to connect the printer and you can see after downloading some drivers of my PC and I can print - but every now and then it prints garbage to half way through a document/print run.  Someone has experienced this problem and if so how to solve?

2nd edition

At the time where the printer is a stand-alone but I want this printer to network, but no matter what I try I can't be seen.  I printed the configuration information and it shows me what I need, but I when I try to add it it just can not be detected.  What I am doing wrong?

I was able to add a Lexmark laser printer at the independent address and I've also linked it with no problems at all.

Any advice (as simple and in English) would be greatly appreciated.

Reset the cold of the printer. Turn the power off. Hold down the green button while turning on the printer up to cold appears in the window of the menu. Liberation and the printer will come on loan. Wait about 1 minute after a ready appears, and then print the config page again and see if the address has changed. Even if this is not the case, go to a prompt on the computer and see if you can ping the address.

Tags: HP Printers

Similar Questions

  • just upgraded to windows 2010 and can not find a way to get to the top of my game of spider solitaire

    I don't know how to download and access windows 2010 Games

    It just shows how dumb can use computers sometimes!  lol I meant windows 7!   And I thought about it... but thanks for the laughs!

  • I've upgraded to windows 7 and can't get my motion eye camera work

    I've upgraded to windows 7 and can't get my motion eye camera work

    Go to the Sony website and find your model of PC in the support section. Now download the Windows 7 drivers for the camera (assuming they exist) and then install the drivers.

  • Envy 15-c101dx: 8.1 Windows reset always available after upgrade to Windows 10 and refreshment?

    I tried to troubleshoot and fix a driver of hareware problem that was discovered after doing the upgrade of Windows 10 Windows 8.1. Before updating my system, I was warned by the software that I would not be able to return to Windows 8.1 if I did the update with the upgrade of Windows 10 still installed. My question is if Windows 10 also stop me from going back to Windows 8 if I did a reset of the system?

    I played it safe and restored back to 8.1 for Windows before you reset this time, but this will delay upgrading me to Windows 10 in confidence (1 month to try it is not a lot of time).

    Hi @hyjiad.

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY x 2-computer laptop 15-c101dx and concerns with the Windows 10 upgrade. It shows me that your system is compatible with Windows 10 drivers. It tells you which driver he would have a problem with?

    The best I can offer at this point is to create your a HP recovery USB drive.

    Here is a link to Windows 10 FAQ. It gives you that Go Back is a feature that will restore your computer to the old operating system that was installed before you upgraded to Windows 10 for only 28 days. But with your recovery USB disk you can do at any point and time.

    I hope this helps you.

    Thank you.

  • No networks detected after upgrade of Windows 8 and Windows Update

    HP Compaq dx7400 d7400s S/E8300 64-bit chip 32-bit of Windows 8 Pro

    Updated for Windows 7.  Ethernet of Broadcom has not worked but PCI adapter D - Link DWA-510 wireless worked well.  Update from Windows Update and the Defender through the window update were only facilities.  Stop letting the updates of Windows Installer.  Next time you start the 'no networks found '.  Pilots refreshed. D - Link says there is no new driver for Windows 8, but the adapter worked for 6 days.  Have 8 machines to be upgraded, a second has the same problem.  Got an adapter Wireless USB TP-Link and after a flawless installation always get no networks found.  Device Mgr shows everything as well.

    It appears Windows 8, once Windows Update cannot use any network adapter.

    Hello world

    After working with support for a very long time, we have determined the following:

    It seems that if the first network card driver fails to install correctly (in this case, the Ethernet adapter embedded knew incompatible), Windows 8 will not start the Service WLAN or it launches the application and it crashes (stuck in a wait state) and then even if install subsequent fine wireless network cards and look in the Device Manager they are not available for the system.
    Even if the network adapter has failed is disabled (via the Devcon command or through the user interface), it always causes failure of the WLAN service and subsequent failures to occur.  The user must obtain map of defective network out of the category network adapters in Device Manager by asking the driver updated and when the update fails, the system then puts the device in the unknown category.  If the user then turns the unknown device, that's alright then.
    The sequence is:
    1. start the system
    2. Once completed, there is no network connectivity and the incompatible adapter is in one State does not work in Device Manager.
    3. in Device Manager asks the updated driver for the incompatible device.  The update fails and the device is put in the category unknown and removed from the category network adapters in Device Manager.
    4. in the Device Manager, disable the unknown device.
    5 restart the system and the network card bad remains a device disabled, unknown and thus becomes the first met NIC wireless adapter that installs and initializes all right.

    Everything works fine across reboots and stop / start cycles.

  • Compaq Presario CQ61: After upgrade to Windows 10, HDMI does not WMV (.wmv) files more.

    Hello

    When I connect my PC to my TV, movies created with Movie Maker cannot take more since I've upgraded to Windows 10.  My system is completely up to date.  Without HDMI, there is no problem.

    What can I please?

    Thanks in advance.

    Hello @PaulTLX,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I read your post on the HDMI issue and wanted to help you!

    The problem may be the driver.  For your product, all Windows 10 drivers are pushed through Windows Update.  You can try to check for drivers that will work with Windows 10.  You can see this site as well:

    HP products - where to find Windows 10 drivers and software for my model?

    If you have problems to install the drivers, you can use the tool on the following site:

    Open the Windows Update troubleshooting tool

    It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • How is done since the upgrade to Windows 10 I can not blockers advertising at work?

    I had Avast Antivirus navigation secure, Ad Block Plus, Ad Block Plus Pop Up Addon, blocker of advertising from Facebook and Webmail Ad Blocker all installed and working great on a customers laptop, but after they have upgraded to Windows 10 all the addons disappeared. I tried to reinstall and the blue bar runs through to the end and it sticks on 'download '. Why can't I install?

    If that doesn't fix it, the nuclear option complete clean reinstall, can help.

    This means that you delete your Firefox program files, and then reinstall Firefox. This process does not delete your Firefox profile (such as bookmarks and passwords) data, since this information is stored in a different location.

    To do a clean reinstall of Firefox, follow these steps: Note: you can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
    2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

      Click the close button

      ).

    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

  • Windows 7 says this isn't authentic after changing the HARD drive and can not activate

    After a Windows Update I received a notice that my version of windows was not authentic, which is false because I had windows on my laptop because I got it 4 years ago. Recently, I had to have the changed HARD drive as it corrupts. Installed new HARD drive and partition it a space in which the old files to hard drives. Seemed to turn very well when HARD drives were exchanged and windows installed on the new drive until windows update. My Microsoft certificate key is passed out to illegible but I don't have the product key for the OEM version. Any help would be great, thanks.

    If Windows was preinstalled on your computer, you can enable using the code from the sticker on the computer.  If you can not read the sticker more, you will need to contact the computer company he built.

    If you purchased Windows from the store, you can enable using the code of the case/box/CD.  If you can't read it, you must contact the retailer who sells to you.

  • Features of the printer lost after upgrading to Windows 8

    I use a HP Deskjet 2060 K110 AIO.

    After you have installed Windows 8 Windows 7, the "Pages to print" option (print odd and even pages) and 'HP Real Life Technologies' are missing, even after I installed the driver for http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4157...

    I tried to install the driver on the CD it came with, it won't install.

    This feature is deliberately deleted or did I miss something?

    Hello

    These features make accessible to the general public through the driver supplied with the HP full feature software, by your description I guess you have mistakenly added the In-OS driver included in Windows 8.

    Follow the steps below, which should add a feature to the printer:

    1. download and run the latest version of the full software features below:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109371-2&cc=us&DLC=en&LC=en&OS=4158&product=4157336&sw_lang=

    2. once the installation dialog box appears, click CTRL + SHIFT + ESC to open the Task Manager

    3. right click on the process of HP - DQEX5.exe, and then select the location of the open file.

    4. right click on the address bar and select copy address as text.

    5. open the control panel and then go to devices and printers, the HP Deskjet Ink Adv 2060 icon right click and select printer properties.

    6 open the Advanced tab, click new driver.

    7. click on Next, click the disk button, paste the address of the software by clicking CTRL + V and click OK.

    8. finish the wizard, and then click OK to confirm the changes. your pritner driver now understand one of these options:

    Kind regards

    Shlomi

  • HP Officejet Pro 8600: Upgrade to Windows 10 and does not recognize the printer scan function

    What should I do to get my scanner to work with Windows 10?

    Hello

    Re-install or update software and driver help. But what is your HP Officejet Pro 8600? HP Officejet Pro 8600 - N911, it must be* where * can be from a to z.

    Kind regards.

  • Label PSC1410V - ups HP is only printing on 1/4 of the page and can not understand why

    I tried to print a ups label to return an element from zappos, I do quite often and never have a problem.  However, today when I tried to print, the label came out only 1/4 the size it is usually.  I've tried everything I can think of and I am just frustrated terrily.  Help, please.

    Hello Msjan,

    Welcome to the Forums of HP Support!

    I see you are trying to print a UPS shipping label, but it will only print 1/4 across the PSC 1410. What is the operating system you are printing from Windows or Mac?

    You print the shipping outside the Web label? If Yes, what web browser are you using, Internet Explorer, Firefox, etc. It would be a good idea to try to use another browser on the computer.

    Are you able to save ups label your computer as one. PDF, printing, it can work in this way as a work-around.

    See you soon,.

  • I cannot get my printer to print to the edge of the page and can not find the right settings.

    I am creating a spreads in InDesign A4 A5 booklet, what I've done now, but for some reason when I print it is not printing on the edges of the paper. It is short on the edge and runs along the long edge of about 3 mm 6 mm short. I don't think that the printer we have is full bleed, but I expect to get a little more narrow than at the edges. I looked at the document settings and reset all the options of bleed and Slug and I don't see anything to change in the settings local printers. Please someone any idea that I might be able to change?

    Thank you very much

    The list of features of the printer touts unless expressly impression "edge to edge", it cannot print almost certainly one of the 4 edges. It is a mechanical limitation, and 3-6 mm is fairly typical.

    tobyhawksmoor wrote:

    I expected to get a little more narrow than at the edges.

    Why?

    It is likely, there is nothing else to try. If you feed something that would or should print on the edges, if the printer is capable of that and got the 3 and 6 mm printable area margins, this is certainly the best it will do the printer.

  • I have upgraded to Firefox 8 and can not get a home button on my toolbar

    It doesn't seem to be an option to add a button to the toolbar. It isn't even a home button listed under the menu button customization.

    I couldn't find it no more, but it's more to the right instead of on the left, it's a small house.

  • Just upgraded to Windows 7 but can not receive updates or download Windows Live Mail. Said that there are already 1 being downloaded, please continue to download one

    I tried to bownloed windows live and it says that there are already 1 being downloeded, I tried windows updates downloeding and he did not finish. Looks like I'm not able to get anything from Microsoft. Is someone can you please tell me what can be done?

    See if this manual update installation problem solver: http://support.microsoft.com/kb/947821 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Upgraded to Windows 7 and then downgraded back to Vista - ethernet not working, pilots it but says error Ethernet does not, code 10

    My computer is a Vista desktop Dell Vostra.  I've upgraded to Windows 7 and did not like (a lot of my programs wouldn't run well on it) so I tried to demote him back to Vista.  Now my ethernet does not work.  The drivers are there, but he says won't work, code 10.  How can I fix it?  I can't solve the problems on the computer, because I have no network.

    Hello

    go to dell and get the latest drivers for vista for your machine using one, you're on to get here

    Save the drivers for the flash player and then transfer them

    http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

Maybe you are looking for