HP LaserJet 6 p printer range does not print with windows 7

I installed the drivers that came with Windows 7, but the printer does not print. I run the diagnostic tool; It removes the work and says it's fixed.  It is not the case. HP says they cannot help.   I love my 6 p and would rather not have to buy a new printer.  Can anyone help? Thank you.

Windows 7 does NOT support printer HP laserjet 6 p.  It is a HP note:models 6L and 6 p in the LaserJet 6 series are NOT supported in Windows 7  I got and downloaded the driver on the Internet somewhere by typing: driver of HP laserjet 6 p.  You can check the box to add printers over the Internet.  I'm not looking for the process.  Try and I hope it helps.  In the meantime, I'm troubleshooting why my 6 p prints (parallel to 6 p and USB for laptop HP cable).  Don't forget the impression of 'biodirectional' is not checked in Ports (USB001, 2 or 3) place (lower-left) in Device Manager. Right-click on your printer, you will see 'printer properties '.  I say that linear, but you will get it.  Let us know.

Tags: Windows

Similar Questions

  • My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

    My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

    Hello

    Is the printer connected to your PC by USB or network?

    Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

    Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

    Kind regards

    Shlomi

  • lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

    Question
    better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
    Details

    In current versions of Flash you can also do this via the control panel.

    • Control Panel > Flash Player, click on remove and erase data
  • HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

    HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

    Thnx man always the same thing, but I deleted all partitions and then I was able to start...

  • GTA san andreas does not open with windows 7! How to silve this if you please help me

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: gta san andreas does not open with windows 7! How to silve this if you please help me

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Review the information from the Windows 7 Compatibility Center.
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Grand%20theft%20auto

    He says that version 2 is not compatible.

    If Aero is the problem, disable it before installing the game and then turn back on.
    I would say as you right-click on Setup and select "Run as Administrator".

    I hope this helps.

    Marilyn

  • DVD player does not work with Windows 10 on Acer Aspire 5553 G

    DVD player does not work with Windows 10 on Acer Aspire 5553 G. I waited for a fix of Windows a whole year now and I have tried several fixes that didn't work. Are there new solutions for this problem?

    http://community.Acer.com/T5/Windows-10/5553g-Windows-10/TD-p/375386/page/2

  • Microsoft VX 2000 does not work with windows 7

    I bought a webcam Microsoft VX 2000. It does not work with windows seven, when I use windows live messenger.

    I configured my device tested and it works, but if I try to have a video conversation of the webcam does not light. Ive gone in the tools and video microphone works fine, but when it comes to have a convo with someone the video does not start and so the other person can't see me. It works with Skype etc but not windows live messenger

    Hello smiffyinspain,

    The question you have posted is related to Windows Live and would be better suited to the Windows Live Help community. Please visit the link below to find a community that will provide the best support.

    http://windowslivehelp.com/community/

    Kind regards

    Savan - Microsoft technical support.

  • My bd dvd win does not work with windows 8.1

    My bd dvd win does not work with windows 8.1

    Hi johnny_k_01, sorry for the confusion, I just need to clarify. What is victory dvd software? or are you talking about the player view dvd itself? It will also be very appreciated if you can provide the name of the model of your device.

  • Why CRYSTAL_REPORT program does not work with windows Vista? __

    Why CRYSTAL_REPORT program does not work with windows Vista?

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    If this is not Vista compatible, read the info on the link above.
    It works for some programs, but not all.

    This applies to software programs, NOT hardware drivers.

    If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

    See you soon.

    Mick Murphy - Microsoft partner

  • my life chat lx-3000 does not work with Windows 7 help plz__

    my life chat lx-3000 does not work with window 7 help please

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • eGames Solitaire Master does not work with Windows 7

    Original title; Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

    Tried master eGames Solitaire, this does not work with windows 7. When will Microsoft a compatabillaty mode that actually works. If this is not the case, stop advertising as such. Its time Microsoft was made responsible for the costs involved in the duty of the latest edition of the software because of their own mess.

    Then you may need to try the modes of virtualization I listed above depending on the version of Windows 7, you have installed. However, XP Mode was created mainly for commercial applications and not for games so graphics intense games may not work correctly even in XP Mode.

    You can check with the manufacturer to see if they have an update or a fix that will allow the game to be run on Windows 7. Since the site egames solitaire Master 3 or 4 Master Solitär does not show to be compatible with Windows 7. However, they show to be compatible with Windows Vista.

    It is the manufacturer of games to make their games compatible with the operating system back.

    Hope this will help.

    Marilyn

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • U2413 SD card reader does not work with Windows 8.1

    My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?

    I have the same problem here too.

    The driver above does not work.

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • 4clipika for satluj police (Punjabi) does not work with windows 8

    R/Sir

    4clipika software for satluj police (Punjabi) does not work with windows 8, but it works with 7 and windows xp. Please solve this problem.

    BSwakaf

    I suggest you cont developer patches or updates.  It is for the developer to make it work with win 8-not the other way around.

Maybe you are looking for

  • Why I recently began having a display problem with fonts.

    I recently started seeing a lower quality fonts display in my web depending on the e-mail program and it cannot identify what has changed on my pc, unless it's a Firefox update. Also noticed that the Google search results headers have small dots on t

  • Expected 'end', but concluded end script error. Anyone can solve this for me? THX.

    I make a joke for my friend program but I can't seem to understand how to fix this script. I even deleted the "defective" part of the script and spruced up: display dialog "our processor cannot handle the installation program. You can use the overclo

  • Satellite A50 and XP pro?

    I have XP pro for purposes of working on my brand-new Satellite A50-522, but installation (even XP home upgrade) will not perform copy of files due to an unspecified error (blue screen and so on)-sometimes BAD_POOL-APPELLANT, sometimes "try to change

  • plotimages

    Hello! IM using plotimages from the property of XY graph node to draw objects in the background of the chart. I have 2 problems: 1: it works fine when I use a cluster as input, but when I compose a cluster by Group 4 inegers, nothing appears on the s

  • dll file missing (MSVCP120. DLL

    My computer crashed Commonw and I had to restart the plant. I installed all my other programs, but now I get an error: lack of MSVCP120. DLL. does anyone know how I can get this file and install it. There are many programs that want to register and p