HP Laserjet CM1415fnw does not print wireless

Original title: HP Laserjet CM1415fnw

My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

Hey Kevin,

What version of the windows operating system is installed on your computer?

Refer to the steps in the following article and check if it helps.

HP Print and Scan Doctor

Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

Printer in Windows problems

Keep us updated on the status of the issue.

Tags: Windows

Similar Questions

  • Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft. Please notify.

    Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft.

    My Toshiba Laptop Windows XP Media Center OS is currently being updated with the exception of a point to update MS Office 2003 #KB949074

    has no size to him.

    Please notify.

    Kind regards

    Adolph Moret

    A call back to Epson says my Windows Firewall blocks printing Epson Status Monitor and by disabling the firewall every thing returns to normal.  Turning on the firewall without exception is still no difference and I should contact Microsoft for that matter.

    If the application works when the firewall is disabled, but not when the firewall is turned on, so you must create an exception for the application.

    I don't know what you mean by "turning on the firewall without exceptions still makes no difference" - no difference of what?

    You must determine the name of print Epson Status Monitor, then go to control panel > Windows Firewall (if your control panel is using "Category view", you will find Windows Firewall in the Security Center).

    Once in the Firewall dialog box, click the Exceptions tab, click the button "Add a program" and find printing Epson Status Monitor.  If it is not in the list that appears, click on the button "Browse".  After selecting the program and click OK, make sure that on the general tab of the Firewall properties dialog box that the "do not allow the box exceptions" is NOT checked.

  • LaserJet P1606dn: does not print the background of the page number of manual

    I use the HP Laserjet P1606dn printer.  I am trying to print the user's Guide the HP for a new printer HP Officejet Pro 8620.     The manual is in PDF format.   When you view a page of the manual on the computer screen, the page number appears at the bottom of the screen.  Unfortunately, when printing the printer manual HP Laserjet P1606dn, the page number is not printing.  I tried to use the SHRINK TO FIT to the Laserjet function, but that does not print the page number.

    Any advice on how to print the page number would be welcome.   Aaron

    Thank YOU FOR YOUR QUICK RESPONSE!   PROBLEM HAS BEEN RESOLVED.  I TRIED TO PRINT THE GUIDE THE USER DIRECTLY FROM THE WEB SITE THAT DID PRINT NOT PAGE NUMBER.    I DOWNLOADED THE MANUAL IN THE MEMORY OF THE COMPUTER AND THEN PRINTED THE GUIDE FROM THE DOWNLOADED FILE.   THE PAGE NUMBER DID PRINT WHEN YOU PRINT FROM THE DOWNLOADED FILE.    WHY IT WORKED, I DON'T KNOW, BUT CELA WORKED.

    THANKS AGAIN FOR YOUR KIND INPUT1 BEST, AARON

  • HP Color Laserjet CP2025 does not print the colors in the document

    Original title: print film

    I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

    Hi DirkjeAbma,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3 color printing fails all printing applications?

    You can see the following HP support article and check if it helps to solve the problem:

    HP Color LaserJet CP2020 printer - image quality problems

    You can also read the following article and check:

    How can I check my ink or toner levels?

    Hope this information is useful.

  • HP Laserjet 1200 does not print in Windows 7

    I have a HP Laserjet 1200 connected via the USB port of a laptop running Windows 7, 64-bit.  I installed the driver 64-bit windows 7 to the printer through the Windows Update process.  I added it as a local printer as described in this thread.  The driver installs and seems fine.  (The icon of the printer under "Devices and printers" is another printer, but I don't know which is relevant).  When I try to print a test page or any other page, work flashes in the queue of the printer window and disappears quickly, but the page does not print.  I get no error message.  Any suggestions?

    Hello

    I suggest you go through the following link.

    Printer in Windows problems.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    You can also try downloading the driver from the manufacturer's website, install on your computer.

    You can download the driver from the following link.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=29790&prodTypeId=18972&prodSeriesId=29789&swLang=8&TaskID=135&swEnvOID=4063

    You can also refer to:

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  • printer does not print wireless now that I added a password on our wireless account

    Does not print my 611 3052 printer all-in-one wireless more.  I added a password to our wireless router and now it will not pick up the printer.  What should I do?

    Well Yes, the reason why I proposed the software is that it is the only way to get the wifi password.

    I would recommend you go to the front of the printer and go to settings > Wireless > default settings before running the software.

  • Kodak in a 2150 does not print wireless. compatible with the usb cable. Help

    My printer prints not my lap top. It works already. I uninstalled the program and reinstalled and it still does not print. I turned off the printer for a minute and I turned my router for a minute and they turned back. I don't know what else to do. Help, please.

    See if it helps:

    Lost on printer all-in-one Wi - Fi
    http://support.en.kodak.com/app/answers/detail/A_ID/2741/selected/true

    The guests to answer and follow the troubleshooting.

  • Printers Multifunction LaserJet pro CM1415fnw does not print in color.

    I have a hp pro cm1415fnw mfp laser jet in my office who does not want to print in color. I have a windows xp. Whenever I try to print in color out of windows from microsoft or the internet the picture comes out all black and not in color. When I print a diagnostics page it prints in color, however. I need help.

    Hi RicherdAC24,

    Follow the steps below to uninstall and reinstall the printer.

    1. open Control Panel

    2. click on uninstall a program

    3 uninstall the Laserjet CM1415 in the list

    4 restart your computer

    5. download and install the latest version of Adobe flash player

    6 download the drivers and full software functionality, and then reinstall the printer.

  • HP Laserjet 1010 does not print

    After you have reinstalled Windows Vista 32-bit and printer HP Laserjet 1010 and update the printer driver does not work.  There is nothing wrong with the printer (everything is checked with the program Microsoft Fix It).  When I click on and open the printer it shows that there is an error.

    Have you installed the printer according to the instructions from HP, who usually does to install the HP software * before * the printer connection, and you used the latest version of the software / drivers from the HP site, or did you just plug?

    And if you have installed the HP drivers / software there is a HP utility test, theres also the option to print a test page through printer Btns

  • HP LaserJet 5550 does not print A3

    I rMBP (Maverics 10.9.5) and network HP LaserJet 5550 (pilot 19.8). After the last Update my priter won't print A3.

    I reinstall the printer drivers. I reconnect my printer, but it does not solve my problem.

    How to set up the paper of trey?

    I solve my problem after update Photoshop

  • 8600 visible on the network, but does not print wireless

    I can see the 8600 on my airport network, but does not display the work sent wireless (no error msg, stay in the queue). To print correctly if the USB cable is connected. Also see a separate network of 8600, but do not have a WEP key for it and don't see how to create one, so it won't let me join this network. Don't see any info on this in your pages and support forums.

    It was a very good question. I looked at my list of printer and there are 2 8600 s that are listed.  I think we could be active when the printer is connected via the cable and one for when it is wireless. I went by default and had no trouble in a wireless printing sheet.  It is probably a mistake on my part of the user, but I don't remember adding a second printer in the menu printing. I'll play around with it and remove an if it is not necessary. Thanks for your help.

  • HP F4580: Printer does not print wireless

    Hi there, can you help?

    I have a HP F4580 which will only print with the wire attached to my computer printing and the custom of my laptop either.  Ive done all the tests and it won't always feel. What should I do next?  TIA

    Hey there @Listento!

    Thanks for posting on the HP Forums!

    I would be happy to help with your HP Deskjet F4580, and wireless printing.  I can give you some suggestions that will hopefully solve the problem!

    If the printer wireless light blue which indicates its connected to the network.  I suggest to reconfigure the connection of the printer to the router to connect.  Once the printer is connected to the network then you can try to add the printer to the computer using the HP software.

    You will need to remove the printer from the computer first.  To do this, you will need to go into devices and printers from the start menu.

    To remove the device from the computer:

    1. click on the start icon

    2. click on devices and printers on the right column

    3 select your printer

    4. click on remove the device at the top of the window

    5. unplug the USB cable

    6 restart the computer

    To reconfigure the Deskjet F4580 Wireless:

    1. power cycle the printer and make sure that the USB cable is NOT connected at this time.

    2. install the HP software CD into the computer (if you don't have it click here: Deskjet F4580 Software)

    3. follow the installation of the software

    4. There should be an option to set up WiFi

    6. it will check the network environment and then ask you to connect the USB cable

    7. connect the printer via the USB port and follow the installation of WiFi program

    8. at the end it should ask you to remove the USB key and print a test page

    To add the printer to the laptop:

    1. install the HP software in the computer CD (if you don't have it click here: Deskjet F4580 Software)

    2. follow the installation of the software

    3. to find the printer on the wireless network

    4. follow the software configuration and test printing

    Please post back and let me know if this worked for you!

  • Color LaserJet 2605 does not print

    My ColorLaserJet 2605 was printing very well - I finished work, then fed the following work and therefore, everything he says "print document" with the green light flashing - but nothing ever prints! I rebooted, reinstalled, nothing changes - it lights, initializes, said it's "Ready", and then when I try to print a 1 page, simple text without color or photos document, I get the same situation of non-printing - saying the document print, but nothing prints ever. Any suggestions? Thanks in advance! Aggie 55

    First, go to the reports menu on the printer and see if you can print a configuration page. If it works, check your driver. If this does not work, then you can be problems to trainer.

  • Does not print wireless print server WPS54G

    I am using the installation wizard, but when is check the wireless setting I get a connection failure message. Help, please!

    According to the specifications of WPS54G, it only supports of WPA, does not support WPA2.

    Don't know there is that no new F/W can support WPA2 or not.

    If you had better to change security to WPA - PSK (TKIP) router and WPS54G wireless.

    And when you want to use WPS54G wireless, after unplugging the ethernet cable, you must turn off then WPS54G on.

  • Printer does not print wireless with a laptop

    I just got the B210A Photosmart more for Christmas and it is all set to print wireless from all the computers in my house except my Dell laptop running Windows Vista home Edition.  Everything says it connects and work, but I'm unable to print.  I just get an error message.

    The only thing I am able to print wireless is when I open the Web page the printer by typing the IP address and choosing to print a test page.

    All the diagnostic tools, I downloaded everything that the printer is connected and works well.

    I tried to uninstall and reinstall again.  Nothing works.  I also have one Mac and a Dell desktop that so many very good wireless printing.

    Help, please!

    Have you tried to disable the firewall of your security system?  Have you deleted and added the printer in Control Panel?  If this is not the case, do it in this way:

    1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
    2. click on > start > Control Panel > printers.
    3. click on add a printer
    4. Select local printer
    5. Select create a new port and select Standard TCP/IP Port, and click Next.
    6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the host name of the printer (found on the network printer configuration report the generated above). Click Next.
    If you get a message about required additional Port information, then the printer is not found using the host name. You can go back and start over or using the IP address of the printer instead of the host name.
    7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
    If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
    8. If prompted, use the driver that is currently installed.
    9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
    10. we may ask you to share the printer. Make a choice and click Next.
    11. the printing area of Test Page is displayed. Go ahead and print it out.
    12. click on finish.

Maybe you are looking for