HP LaserJet CP1525nw color - engine comm error.

Similar Questions

• HP LaserJet CP1525nw color print quality problems

  I got a HP LaserJet CP1525nw color about 2 months ago. After about 4 weeks, I noticed a print quality begins to degrade. Black started first by streaks and fading. Now when blue prints starts to show streaks and melted a magenta pink. All cartridges are at 50 percent of capacity or more. Any ideas about what to check?

  Hello Graf213,

  There are a few things of different which could cause print quality begin to deteriorate on printouts. My guess is that the printer may need to be cleaned and / or calibrated.

  Troubleshooting HP article addresses print quality issues, and provides for the issue of many resolutions.

  Solving print quality problems

  Perform the steps, and I would like to know the results.

• You print envelopes with HP LaserJet CP1525nw color

  I tried to print envelopes on our printer above.  My document is in Word is formatted accordingly for a #10 business envelope

  Under the terms of the HP help function, I found the info on how to set up my document print options, then it would print correctly.

  The first envelope printed on the side of Rabat; I have reloaded in Tray 1 and was ready.

  The second envelope printed with success so I thought that I understood.  So, I loaded the tray paper with 5 envelopes, hoping to print them massively.  I couldn't get it work when I tried to print 4 at a time.  I got a "Paper jam in tray 2" error and I was not yet using tray 2.  I erased the 'problem' and AN envelope printed with success, then I got the same error message.

  I had 2 envelopes more printed this way, but every time I got the same error message, erasing the machine and 1 printed envelope.

  Frustrated, I cancelled the multiple print job and tried to print envelopes one by one.  Now it does not at all even if I delete the phantom paper jam every time.

  Can anyone help with this?  It makes me nutty.

  Background info: my husband (network engineer) install the printer.  I have over 20 years of experience in processing and usually have good results with appearing on printing problems.  It left me speechless!

  Thanks for any help you can provide.

  Dianne

  The CP1525 allows you to print envelopes. There are two ferries, which can be used. I will describe using only the lower tray. Normally, this tray is used for standard paper.  To use the letter envelopes, you must remove the tray and then make some changes. Remove all paper. There are supporters of blue color paper. Two are used for the width of paper. Move the cursor to the Center so that it will load the envelope with the top to the left. Put the envelope with the printable side upward and the top to the left. Slide the blue paper holders so that they touch the top and bottom. Then push the envelope completely backwards and then move the holder unique blue paper in the front to make it against the envelope. You're ready to print as much as the printer.

  I select the printer properties. I indicate that I am printing an envelope. I had also to indicate the landscape. I also had to move the appropriate print areas where I want to be. Then I added my address and the address to where they're going. I'm not sure that I have everything but it should work well.

  I only did this, but you can use two trays with one who holds a number of pages and the other for a certain number of envelopes.

• Color LaserJet CP1525nw: 1 1/2 black lines on the right side and another black spot on the side right laserjet cp1525nw color

  I downloaded the software and latest drivers. It has the latest firmware. I contracted the toner and blown with compressed air. Look in the back for the dust from toner on the sleeve of teflon to fuser. Unplugged, restarted, of course my book has been for laser printers. Ran across several cleaning cycles, recalibrated color, put a piece of paper and toner open door when he was printing. Released A black to see if I could see and toner on blue cylinder. None of the things I've tried have solved the problem. Toner is about 3/4 down. It print fine with this new series of cartridges for quite a while.  I went from my warrarnty.

  .

  The amount of toner from the printer say that there is only an estimate. Your default seems to me that the black toner cartridge is bad. First thing I would do is to replace the black toner cartridge as it should solve your problem.

• No sufficient data CP1525nw Color Laser - ePrint errors - & processing error

  Hello.

  I was struggling trying to get printing to work on this printer with my iPod. ePrint is one of the reasons I bought this particular printer.

  I managed to get an email to printing, but it is not do me much good, because it was just an email composed on my iPod e-mail client. I don't plan to do it like that at all.

  I use several apps that have a "mail" function, which simply use the e-mail of your iPod settings. The app I really want to get to work is MindNode. The application will send files png as an attachment.

  It seems that this is a problem on the server because the error I get is related to an error of 'treatment' and "insuffient." given I can't believe that insufficient data because I can view the email and see that the png is attached.

  I also sent emails directly from Yahoo Mail and Hotmail on my Macbook and Windows XP. I get the same errors.

  This could not be a problem with my router, could it, since I have received an email composed on mail on my iPod to print immediately?

  Can someone help me please?

  Jon

  Jon,

  It's a very good question that you asked, and in the post, I have copied directly from the help at ePrintCenter.com section, it says that a reason possible, why the error "insufficient data." As I was doing some research on this and posting I think is when you posted that you found is more than the hit error back to your iPod, but rather the error now is visible inside the ePrintCenter queue.

  Now, you are using an e-mail account on your iPod on your computer that print successfully? Your apps on your iPod using the e-mail settings, but are not necessarily direct emails.  If you sent a picture of the app you use for an email account different (i.e.. your personal Gmail or Yahoo), the destination e-mail address appears in the CC: section?  There comes a strange source that is not a typical research e-mail address or an address that is not on your list of users allowed inside the ePrintCenter? Here are other reasons why you may only display the error inside the ePrintCenter.

  This coming .png file is what specific app on your iPod?

  Thank you

• HP Color LaserJet CP1525nw: Can't get CP1525nw connected to the network wireless Netgear Nighthawk x 6 R8000

  I have never been able to successfully get the printer installed by wi - fi with any stability, so we always connected via USB and shared. I bought a new router and would like to be able to print to this printer wireless anywhere on my network. I can't out of connected mode and mode wi - fi printer. Your software crashes, crash facilities to half way through. The printer indicates an IP 169.254.xxx.xxx, if the network is aware, but it's I can get. None of the HP tools will run under this operating system, they hang immediately upon launch. It's frustration none! Someone out there was a bit of luck with this printer!

  Dell XPS 8700 16 GB of RAM

  Earn 8.1 (64-bit)

  Comcast TG862G Gateway (POS)

  Router wireless Netgear Nighthawk x 6 R8000

  HP LaserJet CP1525nw color printer range

  Hi @jrmunn ,

  I want to help you get the printer works on the wireless network.

  There are a few different ways to install the printer on the wireless network.

  • Thanks to the support WPS.
  • Through the installation, by connecting the USB port, it will configure the wireless.
  • Once the USB installation is done. You can configure the wireless via an Ethernet connection.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Uninstall the printer software.

  WPS configuration method:

  To connect your printer to your wireless router wireless using WPS:
  (your router must support WPS)

  Start the mode of the WPS button on your printer.
  Within 2 minutes, press the WPS button on your router.

  Then run a printer from devices and printers Add Wizard.

  The USB method:

  Perform a clean boot on the computer and disable the Antivirus software and any analysis in real-time in the Antivirus software also. How to perform a clean boot in Windows.

  Then run the installation immediately after connecting the USB cable, follow the steps described in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue. (you can use this procedure for any type of installation)

  If you are still having problems and you have an Ethernet cable, we can install the printer as a USB connection again and then configure the printer via wireless Ethernet.

  Method of Ethernet:

  Restore the default settings of the printer.

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Print a printer configuration page, to get the new IPv4 address.

  Then create a new port with the new IPv4 address.

  In the devices window and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• Color laserjet CP1525nw will not print in color

  I installed the PCL6 and PostScript drivers on my Surface Pro 3 to print to my LaserJet CP1525nw color.  The printer is connected to my router.  The printer prints, but only in shades of gray.  What can I do to be able to print in color and continue to print through my router?

  My printer is connected via USB. I installed the full version of the software, and everything works now. Thank you!

• My Laserjet CP1525nw disconnects frequently and does not print. What should I do to put online?

  I recently bought a LaserJet CP1525nw color printer. Firstly, I have established a wireless connection, via a router, with an Acer PC (Windows 7 Professional 64-bit operating system) using the CD of the printer by following the guided procedure and with attention to connect the USB cable when asked me to do. The printer worked very well. Then I installed the software in the CD for the printer on an Asus PC (operating system Windows 7 Professional 64 bit) who was in another room of my house and establishes a wireless connection between the Asus PC and printer. During the installation I was not asked to make the connection with the USB cable. I was able to print from the PC Acer or Asus PC regularly. Finally, I have a wireless printer on my laptop (operating system Linux Ubuntu 12.04 32 bit) using the HPLIP software. On the PC the LaserJet has been set as default printer. Printer LaserJet printed all three PC regularly. I left the printer. The next day, I try to print but I did not do it from a PC. The printer display showed 'Ready' and the correct printer (192.168.1.7) IP address. The blue led is on continuously. However open the control panel of the printer on the PC, I realized that the printer is offline. I tried to solve the problem to read the guide to the printer, but I wasn't able to find any suggestion. PC Acer and Asus have firewall Windows is activated and installed AVG antivirus. The netbook nothing. On the Acer PC, I uninstalled the printer and do a new installation using the CD for the printer. After this operation, I was still able to print from a PC, but the next day, the printer was offline again and was not able to print from a PC. Really, I cannot understand what is happening and should deeply grateful to receive any suggestions on your part. Many thanks in advance and best regards. sdrrmit

  This article should help to keep the Wi - Fi connection and solve problems in offline mode:
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Printer driver LaserJet CP1525nw moved

  All of a sudden my Laserjet CP1525nw color printerdriver reinstall on a USB cable. Technical support is unable to find the problem. I also cleaned my registry and my hard drive but nothing helped. I rarely meet driver problems and have never had a printer driver install fail. Can anyone provide any indication this problem?

  I'm under Win. 7 (32-bit) on a desktop computer.

  Hi Ron,

  You are right, it would be something in the operating system at the origin of the problem. Unfortunately I can't help you with issues related to your operating system. The only thing I can say is that you back up your data on the hard drive and then reload your OS. I'm glad to hear that you were able to successfully install the printer on your computer and the other computer. Have a wonderful weekend.

• HP CP1525nw color: needing a new HP laserjet and want to get one that uses the same previous cartridges

  My printer HP laserjet CP 1525nw Color has finally succumbed to a slow death and I JUST bought 15 cartridges that cannot be returned.  How can I locate a new laserjet printer that uses these same cartridges?

  Thank you!

  According to the HP store (see http://store.hp.com/UKStore/Merch/Product.aspx?id=CE320A&opt=&sel=SUP#merch-comp-products ), the HP 128 has cartridges can only be used with the following printers:

  • HP LaserJet Pro CP1525n color printer
  • HP LaserJet Pro CP1525nw color printer
  • HP LaserJet Pro CM1415fnw color multifunction printer

• My HP LaserJet 100 color MFP M175nw Gets a 54.2 error message

  My HP LaserJet 100 color MFP M175nw Gets a message from 54.2 error, I thibk something stop them from turning. How to manually turn the toner cartridges to get out? the knob does not work.

  Hi mazz154,

  If any of the cartridges get stuck the carousel could not turn depending on how stuck cartridge is. To move the carousel you must have released brake and then find a place on the carousel to do turn to the next cartridge door. Just make sure that you do not touch the mag of the cartridges ink roller with your finger as the oil on your hands can damage the toner mag roller. If you are unable to follow the procedure described in my previous post due to a jam cartridges you will need to call technical support in 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If your printer is no longer under warranty, you will need to review the document below.

  HP out of warranty of the Support Options for HP select consumer printers *.

  Let me know what you find?

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• LaserJet CP1525nw: CP1525nw color printer leaves magenta spots to the left of each page

  My CP1525nw color printer leaves the magenta veins on the left side of each page to print.  I tried to clean the printer using the clean function built into many times I removed and cleaned the amgenta cartridge, and I also deleted every piece of software my machine HP and reinstalled the drivers for this printer.  Magenta strekas are still there. They are always on the left side of the page.

  someone had this problem a few years ago and an answering machine seems to have responded with a link to a wrong page

  Is there a solution or a work link pleaase?

  Well, it's obvious that you're upset.  I'd be for.  To make this real simple.  You have a bad magenta toner cartridge. Cleaning will not work because the wiper inside the toner cartridge blade went probably bad toner causing the flight of this side and causing the problem.  Replace the magenta toner with a new toner hp original and all should be good.

• LaserJet 500 color M551 PCL6 - Toner level error

  I love my LaserJet 500 color M551 but I'm having a problem with the black toner level.  I went to spend the night to have a level of about 50-60% to 10%.  Literally from one day to the next.  I had just checked the levels during the night and the next day the black toner was low.  My use is very light.  According to the page using the number for the monochrome is 1 668.  Total is listed at 3 487.  According to the supplies Status Page 3 543 pages were printed with black and 2 154 ink with the 3, various tonic color.  The only chance 3 543 a to be healthy is if black was included in all color prints so total use of black toner without color would be in the area of 1,400 pages.   There is no way we printed 3 543 black pages and more 2 154 color pages.  We had this printer at 14 months.  We get a new pack of 500 pages about every 2 to 3 months.  At the absolute most, we printed 3 500 pages total.  Most of our impression is heavier on the color.  In fact, we have done a large number of color prints full page.  But given the way we print color is about where we might expect.  And when the black toner showed the 50-60% it was where we expected.

  So what happened? Why our drop of toner level to 10 percent from one day to the next?  I tried the cat with the support, but they did lose one hour of my time and absolutely nothing accomplished.  The service was terribly slow that it was as if a person has worked 3 or 4 cats at the same time.  So I tried it and vain.  The support representative suggested that I swap cartridges.  I don't have a spare those for Exchange.  It made absolutely no sense to me to buy a cartridge of 160-$180 if he could sit on a shelf for a year while waiting to get used.  I certainly don't want to buy and open a new toner cartridge just to know, nothing was wrong with the other.   So the line of background here is... someone has suggestions?  How will I know what is the real level of toner?  Is there a way to reset the levels?

  Better yet. Someone has this model of printer and a black toner empty known cardtridge?  If yes do you know the exact weight of a cartridge empty in ounces? I also want to compare this to the full weight of this model cartridge at 100%.  If I had these two weight I would be able to calculate the exact amount of toner remaining.

  Here, any help would be greatly appreciated.

  I have a simple solution to your problem: just keep printing.  There was problems with the guarantee of toner system where there are sudden jumps in reported toner level, like what comes to live.  Unfortunately, we do not have a foolproof system for reporting levels of toner, and there is no method for re - calculate and declare a correct level in your cartridge.  Toner templates does not rise, they count only down.  When you eventually replace the cartridge, it will start again at 100%.

  The good news is that you have not suddenly lost all life of the cartridge, it looks just like that.  Your printer will continue printing normally, and the toner level be at 10% for a long time.  When the black cartridge is in fact less than 10%, the pledge starts counting down again.  I'm sorry to see this problem coming up for visitors, but it does.  There is nothing wrong, except the black toner level reported.  I know this isn't a great answer, but it is the best I have.   I'm glad you like your printer - try to ignore the level of toner for awhile.

  Best regards

  Alan_R

• Enable Web Services on HP LaserJet CP1525nw

  We are trying to install web print on HP LaserJet CP1525nw service.

  This is a printer over the network from a server windows server 2008 R2 for Windows 7 x 64 machines

  It is connected to a network wired and all (printing etc.) works execpt WebService.

  We manually set DNS 8.8.8.8 and 8.8.4.4 secondary and restarted dns

  We also have white listed IP of the printer on the firewall, so it has access to the internet through the network without be filtered. (Did anyone know what are the IP address for the web services on the HP circuit?)

  When access us the printer using its IP address and go to the configuration of Web Services and click on 'Activate' it is on the screen for about 2 minutes and does not

  "Connection check connection error".

  Any advice is much appreicated.

  Success his works now!