HP laserjet CP5525: error fuser 50.B2.00

Similar Questions

• M775 MFP LaserJet 700: error Fuser LaserJet 700

  My fuser unit started failing last week.  I recycled power several times, but error persists. I purhased and installed a new fuser kit. However, I always get the same fuser error. My guess is that the power supply of the fuser unit is toast. Anyone know what diet controls the fuser unit? This printer has several power supplies. Thank you

  You need to call HP support because your printer probably has a date born on them one could use to validate the warranty and you could get free service.

• HP LaserJet P4515 - error 13.05.00 out of Fuser, paper thin, Jam.

  HP LaserJet P4515 - error 13.05.00 out of Fuser, paper thin, Jam.

  I have frequent errors of this type during work duplex paper jam. Simplex jobs seem to work unless I'm trying to duplex manually by printing on one side then the other well.

  When the jams, I will have a page hit the sensors after the roll before the transfer, usually empty the page following any given bin and my page duplex, which crossed once and came back to the backpage, folded under or on top of itself after its passage of the transfer roller, but before it hits the Fuser rollers.

  Sometimes it wil happen all other double-sided pages, or it can leave 5-10 before doing it again.

  Fuser has been replaced twice, because I thought maybe the first fusion unit was defective.

  I ran the component tests, tests of sensor and they seem normal.

  I need to know where I should look next.

  Currently, I plan to change all of the food guide, since this is where the interference takes place.

  The food guide was the culprit.

  The main roller connected to the gear was broken, which allowed to get out of the lowest speed.

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• LaserJet 1536dnf error 79

  I'm in trouble with my 8-Butterfly-old LaserJet 1536dnf. Worked fine with my computer Windows XP and Mac OS X up to yesterday, when I tried to send a fax by flat bed scanner (scanner ADF works perfectly)

  When I press the button on the Fax, the printer prompt if the document is on "glass", I confirm, start creshes scanner and printer. All the lights start flashing and displays "error 79, restart printer. After a few seconds of printer restarts.

  Also, I unplugged the power cord and plugged into the Jack at the end of a few minutes...

  Print and scan using Windows does not always work, but my favorite software is on my Mac.

  With my Mac OS X computer, one feature of printing now works fine, scanning software can't find any device with Hello (all services are enabled on my printer!). I downloaded the last software OS X from HP.com, uninstalling the old drivers and the software, installed a new... but the scanner and the HP Utility software does not always work correctly.

  I also do a "reset" on the main parameters in the menu of the printer, but nothing has changed (lost network configuration and fax settings).

  Printer runs the latest version of the firmware available on the Web from HP.com site. I've never had no problems during the update process.

  Do you think that my printer needs to be repaired?

  In this period I need really the printer and a scanner for my important documents.

  

  Called technical support.

  Turn off the device, then:

  -Press x and > at the same time (hold)

  -turn on the printer

  -Press and hold both buttons and wait for the message "restore" on the screen

  -wait, wait... When you have finished starting printer new

• LaserJet M1217: Error Scanner 22 with a Laserjet M1217 on a wireless network

  I just tried scanning a document using the SCAN TO PC.  It has worked well in the past.

  When I launched the scan, the M1217 was presented to work until the moment where the scanner arm normally begins to move.  I heard a 'click' plastic, then I got SCANNER ERROR 22.

  I followed the instructions on the FAQ section; disconnect the printer from the power, unplug the power cord, counted to 15 sec, plugged everything back in and NADA!  Re-error.

  Advice?

  Hi @hadrian9637,

  Welcome to the Forums of HP Support! I read your post and see that you are getting the error "Scanner 22. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please try the steps outlined in this document, they are little different from what you have described, HP LaserJet Pro M1212nf and M1217nfw Multifunction Printer Series - a Message "Scanner Error 22" appears on the printer control panel.

  Please keep the lid of the scanner open and then press the copy button.

  Check if the scanner lamp turns on.

  Also to see if the scanner moves freely through the glass.

  It may be a hardware problem.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance. Good day! Thank you.

• HP LaserJet 4050: Error printing on HP Laserjet 4050 and 4100 Windows R2 2012

  We have recently migrated our Windows Server 2003 environment to Windows Server R2 2012.  Some of our printers, specifically HP Laserjet 4050 and 4100 no longer work with Server R2 2012, even if we downloaded the drivers for Windows R2 2012 from the Internet HP site and made sure the printer was using the new driver from HP.  When you try to print from the server or terminal connection, we get a "printing error" in the status field in the queue.  We do not know what to do to get these printers to print.  We have several of them and redirect users to print to another printer which is further so they can print.

  Do you have any suggestions?

  Best regards

  Paul

  If you cannot print from the server, then on the server, the parameters must be incorrect.  You can even ping the printers on the server?  Since you have more than 1 printer with this problem I doubt that all the printers hp all wrong.  Something else in the way that you configure these printers must be the issue.  If you can ping and also access the web server, then I think you have problems with active directory.  If you can not ping so perhaps have changed the ip addresses or the road you take these ip address has changed.

• LaserJet P1102: HP LaserJet P1102 - error "INSTALL BLACK CARTRIDGE"

  Tried to print a provision of the EAGLE Cadsoft program card on photographic paper, A6. The paper A6 was on top of the A4 papers, if the printer did not take the A6 paper. After that, the error "Install black cartridge" appeared. Tried to power off AND removed the power cord for 1 minute, checked for paper inside, cleaned the pins on the cartridge of the printer... still the same error. Help will be greatly appreciated.

  Thanks for providing this information @north991.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Please try the steps listed in this document for the Solution for light flashing light and pay Attention, Pro printers HP LaserJet - flashing lights.

  If the problem persists, please Contact the HP Support and let them know that you have a warranty on toner and inquire about a replacement. Check the model number and the form to receive a file number for faster assistance.

  Please hold me. Thank you.

• HP jet p1102w laser: printing on hp laserjet p1102w error

  When I come back to print from my iPhone and iPad the printer says error could bot print I have tried reseting cartridge changing power rest but he didn't he had printed one page and display the error message please help

  Hi MohamedAlaa,

  After that you went through the second step: print a Self Test / Configuration Page of the device. When she printed it showed an IP address? He mentioned that if something is not on the sheet?

  In the meantime, please see this post, iPhone & iPad can't Airprint for LaserJet p1102w, by @VisionAiry. To make sure the firmware on the printer is up-to-date.

  Once done, go through this guide once again, setting up the printer on a wireless network for the HP LaserJet Pro P1102w printer. To reconnect to the network. You have to turn on all devices again later and check that they are all on the same network!

  Hope this works for you and have a nice day!

• HP Laserjet MFP error 54.2 M275NW 200

  Getting error on HP Laserjet MFP M275NW 200 54.2, cartridge turn - please help.

  Thank you!

  Hi tm_999,

  If one or more ink cartridges are installed properly, this may cause a rotation error 54.2 carousel. This error is usually accompanied by a loud grinding noise.

  NOTE: The carousel is the rotating part under the top cover that attach all four print cartridges. (C = Cyan, M = Magenta, Y = yellow, K = black).

  Troubleshooting

  To resolve this problem, see the following information in the order indicated.

  Remove and then reinstall the ink cartridges

  To help remove and then reinstall the ink cartridges, see the instructions below:

  1. Lift the scanner (M175) cover and remove the capture of scene (M275), then open the toner access cover.
  2. Look for the carousel brake version, which is the small white tab in the location shown in Figures 1. With a small screwdriver pen or glass hold down and then pull the tab toward the front of the printer to release the brake.

  Figure 1: Carousel brake release

  

  1 - a release of the brakes of the carousel

  NOTE: To locate the brake of the carousel, facing the front of the printer, then open the toner cartridge cover. The brake is located on the left side in line with the cartridges.

  3. while now the brake of the exit, turn the carousel forward or backward to align the guides of the print cartridge black on the carousel on the adequate position to remove the cartridge, as shown in Figure 2.

  Warning: Make sure not to touch the mag with the applied toner roller. Oils on your hands can damage the toner mag roller

  Figure 2: Correct alignment for removal

  

  4. remove the ink cartridges when the carousel is in position for the withdrawal of the print cartridge.

  5. Repeat this procedure to remove each remaining print cartridge.

  6. check the cartridge problem for damage (compare to one of the other cartridges if necessary).

  7. Once you have all the ink cartridges that are removed, you will need to turn off the printer and then turn it back on by following the instructions in the error message.

  8. wait the printer prompts for installation of the cartridges

  9. Enter the cartridge by the Central handle and then insert the cartridge into the appropriate slot.

  TIP - Look for the color icons on the ink cartridge slot to insert the cartridge into the appropriate housing.

  10. close the print cartridge door.

  11. After you close the print cartridge door, the control panel displays the message "calibration or during initialization. Expect that the product is idle and silent before continuing.

  NOTE: If you need to replace a print cartridge, you must close the print cartridge door before touching the cartridge button to spin again.

  12. If you need to replace the other print cartridges, press the icon of supplies () again, then select the next print cartridge.

  13. Press cartridge rotation to rotate the carousel to the next cartridge to print and then repeat the previous steps to replace the print cartridge.

  Warning: Wait for the sounds of rotation stop before you open the print cartridge door every time.

  14. After you close the print cartridge door, the control panel displays the message "calibration or during initialization.

  Let me know if that fixes the problem you are having?

• LaserJet 1300: Error when sending to print to the HP Laserjet 1300 printer

  Hello

  I've recently updated form Windows XP to WINDOWS 7, then to Windows Pro 10. I have HP lasejet 1300 printer. It worked fine with WINDOWS XP. I had the problem of printing when I got Windos 7, but it was resolved by installing with force provided for XP rather than WIndows 7 driver.

  Now, after upgrading to WINDOWS 10, I am unable to print, even if windows has automatically identified and installed a HP Laserjet 1300 PCL 6 printer.

  I tried to update the driver to download from the HP site. But without success in printing.

  When I send the command to print to this printer, I get the Message error in the list of the printer and document remain with the error. No data seems to be sent to the printer. I used troubelshot option already.

  Help, please.

  Ok. Problem is solved in my case. I have chnaged the printer driver to auto select HP Laserjet 1300 PCL 6 for HP Laserjet 1300 PCL 5

  Now with printing.

• CP5525 - error 99.05.56

  Hello

  I have a Laserjet CP5525n (P/N: CE707A), whith the 99.05.56 error.

  Update the firmware with EWS. The printer receives the file, but when I click to restart the printer freeze, with the message of the printer is restarting.

  I changed the trainer and the solid state of 8 GB drive but the problem persists.

  I can't find anything about this error.

  Can someone help me please?

  Thank you

  Hello

  To resolve this problem, I changed the controller card.

  Thank you for your help.

• HP color laserjet 2840-error 59.99 displayed

  59.99 error is displayed on the control panel when the printer is turned on.

  Hi budaa,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• Color LaserJet 5500: error code 59.5 k

  Hello.
  My Color LaserJet 5500 poster printer error code 59.5 k while a flashing orange light.

  What can I do to solve the problem?

  Thank you

  59.5 K refers to a motor with the toner cartridge problem black.  Several times it might just be a bad toner, that does not illuminate.  You can test.  Remove all tonics of the printer.  Turn on the printer and when it asks you to install toner, press the menu key and scroll to the diagnostics menu and then choose the item to disable control of the cartridge.  The printer will say check and he would come after a while to say ready, diagnostics mode.  If it does not try once more with the menu in the same way.  When it indicates ready diagnosis mode, open the door and install the toner cyan in black housing and the other two colors in their regular time slots and let the black toner in the printer.  Now close the door and the printer should say check and eventually come to loan, diagnostic mode.  If she comes back with the error, then you have a hardware problem with the train of drum for the black slot and will need service.  If it's ready, print a configuration page in the menu information and it should send a cyan color config page.  If so, your problem is most likely a bad black toner and it must be replaced.

• M475 MFP error Fuser 50.9

  My MFP M475 began to display "Fuser error 50.9.

  I followed the instructions to power cycle and have disconnected from the grid during the night but the problem persists. This error prevents the use of the device.

  The Unit became after the warranty expires in June 2013 however the use was very light, still running on the embedded original toner cartridges - estimate the 2000 prints altogether.

  Thanks in advance for your help.

  RM - f

  To close it.

  I contacted HP, they were very friendly and professional.

  They corrected the problem by replacing the fuser unit.

  It was a very pleasant experience.

  Thanks to those who helped.