HP LASERJET M1132 MFP: HP LASERJET M1132 MFP Mac connection

When I plug in Mac OS X Yosemite for HP Laserjet M1132 MFP or EPSON L210 it always slowed down the printer

Why does this happen?

Welcome to the HP Forums @vladimhirXenon,

I will certainly do my best to help you, however, I would ask that you please let me know some more useful information to help me the problem of the research for you and to clarify the issue.

Please respond to me with the following. If there is no action here that you haven't tried, please try them before you answer and include the result in your response to me:

  1. How the printer is connected (USB / wireless / wired / Bluetooth)?
  2. Did you test functionality of the hardware (made copies) and they work successfully?
  3. You can print from any program?
  4. Have you tried
    1. Reset the printing system
    2. Repair disk permissions and to reinstall the software?
  5. Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  6. Is the printer plugged directly into the wall (avoiding bars and surge arresters)?
  7. Did you complete all updates of Mac OS?
  8. Have you tried using a different USB/Ethernet cable?
  9. You see messages of error codes and if so, what they say and where do you see them?

Thank you

Tags: HP Printers

Similar Questions

  • LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

    UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

    I have a P1102W printer.

    Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

    As it does not have an IP address, I can't access the web server.

    She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

    I installed printer HP Apple drivers, that contains the P1100 driver.

    The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

    I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

    Are there alternatives to this?

    Hi @rcosgrove,

    Welcome to the Forums of HP Support!

    I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

    First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

    Preparation of the printer

    1. Turn the printer off.
    2. While the printer is turned off, hold down the two buttons on top of the printer.
    3. Hold the buttons on top of the printer and the printer.
    4. Hold down the maintained for even 10 seconds.

    Wireless printer setting

    1. Make sure that the printer is connected to your Mac via the USB cable.
    2. Click on your Apple icon, system preferences and printers and Scanners.
    3. Click the icon of your printer on the left.
    4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
    5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
    6. In this new window, click on the networking and wireless tab on the left.
    7. Under Mode of Communication, select Infrastructure.
    8. Select your network from the list and then click on the button with the arrows.
    9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
    10. Enter your password wireless in the field below.
    11. Click on apply.

    Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

    Once you have a solid blue light:

    1. Unplug the USB cable.
    2. Return to the printers and Scanners.
    3. Hold down the CTRL key and click the icon of the printer on the left.
    4. Click on reset printing system.
    5. Click on the button "+" in the lower left corner.
    6. In this window, select your printer in the list.
    7. Click in the box next to and select your printer from the list.
    8. Click on Add.

    Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope this information is useful. Please reply to this message with the results. Good luck!

  • LaserJet 3600n for mac-drver recommended 2.7 version, does not install

    I downloaded, from a supplied link, printer driver version 2.7 for Laserjet 3600n for mac. I thought that the installation was successful and the software is installed, however I can't find anywhere on a hard drive and printer driver version 1.3 watch info.

    Where is the problem

    Hi seegal

    version 1.3.0 is the latest version of the driver for your printer

    version 2.7 indicated full HP driver package bundke for any HP product...

    As you can see below, the following list shows which version of driver software HP printer 2.7 contains any product specific HP, and as you can see 1.3.0 is the latest driver:

    http://support.Apple.com/kb/HT3669#HP

  • How to print from the iPad on LaserJet p2015dn which is connected to my network wireless Ethernet?

    How do I print from my iPad 2 on hp LaserJet p2015dn which is connected to my network wireless capable Ethernet?

    Hello

    Thanks for the post.  I have included a link below that can help with printing from your iPad.  Please read carefully to ensure that your situation meets the requirements.   HP ePrint home and Biz.  Good luck!

    https://h30495.www3.HP.com/help#mobile_apps.Ma-printer-issue

  • HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

    Hello

    I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

    When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

    My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

    Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

    the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

    In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

    I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

    My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

    Thanks in advance for your help,

    Lorenzo

    Hi Lorenzo,.

    To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

    You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

    Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

    http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

    If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

    Kind regards

    Shlomi

  • HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO INTERNET CONNECTION

    HP Color LaserJet M277n MFP printer, is connected to the network and I am able to print and scan. During the attempt to get the HP Web Enable services in the Web services configuration page, it displays an error: "connection error, check the internet connection".

    After you enter the IP address of the printer in the browser, I am able to detect the printer. To enable printing of HP, but unable to do so finds out the above error. Tried a lot of things including re editing of. When I check the printer, it shows the proxy settings are required / incorrect, where, as confirmed by the supplier that they use the proxy server.

    Help, please.

    Hello @JljoThomas!

    Thanks for posting and welcome to the Forums of HP!

    I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd love to help you with this.

    First of all, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Issues when connected to an uninterruptible power supply/Strip/surge protector power
    In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
    ↑ This is not limited to the Laserjet printers.

    If this does not resolve the issue, we are going to let the router and unplug the power cable (NOTE: do not reset the router...), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

    If you are still unable to connect to web services after trying these steps, we can try to set a manual DNS server of your printer to connect to.

    On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

    1. on your computer, open a Web browser and enter the IP address of the printer in the address bar. This will bring up the embedded Web server (EWS) page.

    2. at the top of the page, select Networking.

    3. in the left side, select Identification network.

    4. in article for DNS, under primary (IPv4) enter 8.8.8.8, under secondary (IPv4) enter 8.8.4.4.

    5. Select Apply at the bottom of the screen.

    6. try to activate the web services again.

    If it is still unable to connect, try to enter 209.244.0.3 for the primary (IPv4) and 209.244.0.4 for secondary (IPv4)

    Hope this helps!

  • LaserJet pro m177fw mfp: wireless connection to install

    I have a laptop of my work that is not a hard drive software to installthe to connect wireless to the printer. I was everywhere on the hp Web site to find a link without success. How can I get the laptop wireless connected to print to this printer without having to use the disc.

    Hello

    Please download the following drivers & the software and install it on your computer:

    http://ftp.HP.com/pub/softlib/software12/COL51592/kJ-124901-3/Color_LJPro_MFP_M177_full-solution_13295.exe

    More software and tools: http://support.hp.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443#Z7_3054ICK0KGTE30AQO5O3KA30R1

    Kind regards.

  • 1536dnf MFP network connection not recognized

    I have a relatively new (~ 2 months) LaserJet MFP of 1536dnf which has been correctly installed and running on my network via an ethernet connection that is inflexible.  However, recently the printer lost connection to the network.  The lights next to the ethernet port are active no (flashing or fixed), the printer or at the level of the network switch it is plugged.

    I tried the following steps to remedy the situation, independently and in combination:

    • Restarted the printer via the Start button / stop
    • Restarted the printer via the withdrawal / reconnect power cord
    • The network switch reset
    • Replace the ethernet cable
    • Moved ethernet connection to different port network switch
    • Reinstall the printer drivers

    None of these steps has corrected the situation.  Network Jack lights remained "off" after each step.

    Is there anything else I can try or is it fair to say that the Ethernet on the printer somehow stopped working?

    Thanks in advance!

    You did well with the information.  However, I think that you need to enter your receipt and take it back or call HP because I believe that the Ethernet port may have gone wrong.

  • LaserJet pro 100 cannot connect wireless

    Hello

    I can't connect my HP laserjet m175nw mfp 100 color printer for the wireless. It is to connect to the router and it installed on the computer with the Usb cable, but not with the wireless connection.

    How can I fix?

    Before it used to work perfect, I was able to print even my phone now unless I connect to my computer to the printer with cable it won't work because I can not install the printer works with the wireless connection.

    Help, please

    Solved! Restart the rounter first and after unplug & connect the printer

  • HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

    I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

    Hi @lelg,

    I understand that you want to configure the printer on the wireless network. I can help you with this.

    Uninstall the printer software.

    Uninstalling the printer software.

    Restore the default settings of the printer.

    Go to Configuration, restore the default values.

    Cycle power to the router and the computer.

    Run the installer on the printer wireless.

    Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

    Print a configuration page to get the IP address of the printer.

    Print a Configuration report.

    Select the method.

    If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

    If it loads the page from the network printer then the printer is on the network.

    Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

    Select your operating system, click Next and click on the software to download and install.

    Test the printer.

    What operating system do you use? How to find the Windows Edition and the Version on your computer.

    Please provide detailed results if you're still having problems.

    Good day!
    Thank you.

  • M1212nf MFP: M1212nf MFP cannot connect to the scanner

    When you try to scan a document using the scanner in the HP folder or readIris or paper port 14, I get a could not connect to the message scanner.

    Have tried on/off switch, unplug everything and updatingthe drivers and firmware from the HP site and still nothing.

    Configuration on PC does not bud in a long time and the scanner was working a few weeks ago, but now I get the error message.

    HP support is virtually non-existent, and their software diagnostice did nothing either.

    Also.   I noticed on the LCD Panel there are 3 lights left... Triangle of green yellow continuous top on), with exclamation mark in the middle (at large) and an orange blickinglight next to what looks like a box with a bunch of circles inside (flashing continuously). (I can't find what this icon/light. I suspect he might tell me to clue somehting which is related to the problem, but not what it means.

    Can anyone help me please with this problem.

    Thanks in advance.

    Garry

    Hi @Big-Gee,.

    Welcome to the HP Forums!

    I understand that you can not scan with your printer HP Laserjet M1212nf on Windows 7, and you see the flashing lights on the printer. I'm happy to consider these questions for you!

    To check the printer hardware is functional, are you able to make copies using the printer scanner glass? Overview of the copy.

    In the meantime, please see page 196 in your printer, User Guideand follow the steps.

    I hope this helps!

    "Please click the Thumbs up icon below to thank me for having responded."

  • HP LaserJet P1102w: Unable to connect Macbook to HP LaserJet p1102w

    Hello!

    A few days ago my phone company updated my router to a TG862g of Arris. Since then, I could not connect my laptop to my wireless printer. I already configured the new network in the printer config page and the printer Hello added to my list of printers, but when I try to print something, it just tells me the printer does not exist or that the printer is not respondig, I already tried disable IPv6 and all the other steps HP support advice, but nothing works. Help, please.

    Hello

    I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem for the new printer installation process. I would like to help you to solve this problem today.

    Please reinstall the printer driver to your macbook and downloaded the driver at the bottom of the link:

    http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-P1100-Printer-series/4110394/model/4110306

    Select your desired version of operation printer driver.

    Please follow the below link info. for the wireless settings.

    http://support.HP.com/us-en/document/c02847467

    Please keep me informed of the progress of things.
    If you need help, let me know and I will gladly make all that I can to help you.
    Please let me know if that solves the problem by marking this message as "accept as a Solution.
    To simply say thank you, click the thumb upward below! Happy man

    Thank you.
    Rashed

    I am an employee engineer HP Partner

  • HP laserjet 1005: usb laserjet 1005 to network connection

    I have a usb Hp laserjet 1005 printer, I want to convert it to a wireless printer. This CAN be done?

    I have a netgear N600 router for my network.

    And also a wireless Epson Xp 960 for photo printing.

    Connection Hp laserjet 1005 to the usb port on the Netgear N600 router did not work. Can it work with appropriate software.

    Connection laserjet 1005 p for the wireless Epson XP 960 were printed.

    Any advce is appreciated.

    Using 32 bit win7.

    Thank you very much.

    Hello

    Your printer does not support with/without wire and your router cannot act as a wireless via USB port print server:

    http://www.downloads.NETGEAR.com/files/WNDR3700v3_SM_20MAY2011.PDF

    You can purchase a wireless print server, BUT believe me, it would cost more than buying a new printer with wireless ready now and 50 percent chance he'll give you a lot of problems. You can also buy a new router that has the option of wireless print server. I don't know to connect two printers.

    Kind regards.

  • LaserJet P1102w does not connect to WIFF

    This is a new printer right out of the box and he can't make it work wireless.  I followed the instructions to install the printer, but the HP Smart Install says its downloading the software, said over.  Is not further in order for me to set up the wireless part.  My computer does not have a CD, so I down loaded the disc and when I start it, it goes into a film on how to unpack the printer, etc., any wireless configuration.  I tried setting up this printer on another computer and get the same problem.

    Hey there @paxton2644!

    Thank you for posting back!

    I suggest all initially set the printer to the wireless settings and try again the wireless installation.

    To restore the default settings of the network:

    1. turn off the product.
    2. press in and hold the wireless and the Cancel button and then turn on the product.
    3 hold the keys down until all lights flash in unison, and then release the keys

    If you already have the software, you can check the configuration wireless in the HP folder.  I suggest to try the Wireless Configuration before you uninstall and reinstall.

    To access the Wireless Configuration:

    1. connect the device wireless to the computer via a USB cable.
    2. click on the Start button and then click on the programs or all programs.
    3. click on the HP menu item and then click the printers HP LaserJet Professional P1100 series
    menu item.
    4. click on the wireless settings menu item.
    5. follow the on-screen instructions to configure the product to print on a wireless network.

    Before installing the software for your printer, you must uninstall the old software.

    To uninstall the software HP click here: uninstalling the printer software

    To download the LaserJet P1102w software, click here: LaserJet P1102w drivers

    If you bought the printer less then a year ago, then it must always be within the 1 year warranty and you should not pay for support.  To make sure you got the right number of HP telephone support I can provide here.  Our technical support is 1-800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  • Resolution of printing on HP LaserJet 1606dn on Mac?

    In the Forum:

    I use HP LaserJet 1606dn on an Apple Mac Pro system 10.6.8.  The print driver instructions are source of confusing when trying to set the resolution.  I think that 'Standard' means 600 dpi and "FastRes 1200', 1200 dpi.  Is this correct?  I think that these are the only dpi settings available on the HP 1606dn and there seems to be no option for further settings dpi, 300 dpi or other custom settings.  Am I right about this limitation?

    Clarification on the forum.

    Concerning

    Sternhagen

    Kyle:

    Thanks for the reply and clarification.  He answered my question.

    Concerning

    Sternhagen

Maybe you are looking for

  • keyboard changed on its own!

    I have a MacBook Air 3.1 (OS X 10.6.8).) These days many of the keys on my keyboard have changed meaning (on their own!). The letters are OK, but punctuation, parentheses, accents etc seem to comply with some other keyboard. If I go to System Prefere

  • How to recover photos after restoring from backup

    Is it possible to restore photos a iphone 5 after accidentally from 2014 with no new data backup since then? Why I have not saved for awhile it is because it takes a lot of space on my computer mac laptop (I don't have much space to begin with, only

  • setting the time adding seconds

    Hi guys, I'm stuck and I need help with this one and its emergency situation. I don't have 1 more week to test because I needed to get the data as soon as POSSIBLE. I have this test I've done 1 week, but I messed up on something. I didn't have second

  • Vista product key is no longer available, it is used by someone else!

    I have Vista product key that the rod with my laptop when I bought it 4 years ago, but the last two years, I use the laptop because it's broken, but now, when I want to install and activate vista it tells me that the product key is is no longer avail

  • RAID - disk Local Configuration policy issue

    I'm having this problem where I set up my Service profile of base as Any Configuration mode to associate this service profile on the server (1) and then starts the operating system. After awhile, I create a Service Expert profile and change have my L