HP LaserJet M2727 MFP Series PCL 6 - prints the blank page before and after each document in all cases

Similar Questions

• L7680 ejects blank Page before and after print job

  My L7680 has recently started to eject a blank page before and after a print job; separator page option is NOT selected.  I have tried all the suggested trouble shooting points in the HELP section, but none solved the problem.

  The button Configure the printer had the option to return all the default values - that solved the problem, but it takes you to set other choices that you have made since you use the legacy.

• OfficeJet Pro 8500 has prints a blank page before each print job

  He just started this recently. Prints a blank page before each print job. Because of this quirk, I can't print now before backward.

  Hi Stevienext,

  Thanks for your response with your OS info!

  I would say that running the HP print and Scan Doctor to start to see if that solves the problem.

  If the problem persists, continue.

  Then, try to print from a few different programs to see if the problem occurs in only program or more. This will help us better to 'target' the question.

  Let me know if the pages are still printing in white and that the programmes seem to be giving you the problem.

  I'll do more if necessary suggestions there!

  Have a great weekend

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• LaserJet Color MFP M175nw 100: Cannot reinstall the software to update driver (after having uninstalled by following the instructions on the support page)

  My ability to scan stopped initially with the ADF (ADF) and then altogether.  I downloaded the new drivers and uninstalled my current (using HP Unistaller) HP software according to the instructions on the support page.

  Now, I can not reinstall the software (the installation hangs on the verification stage) so I can't hope to upgrade the driver.

  Hi @kbsmcd,

  I can help you install the software and solve the original problem that you experienced when you try to scan from the document feeder. Complete the following steps in the order I present them in and let me know the results of your efforts:

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Printer prints a blank page before printing a document

  Original title: when you print a letter from Notepad which is printed on the first page is empty, and then the next page is the printed page, why do I have this happen

  When I write a letter from the notebook and I want to make 2 copies my printer prints on a white sheet and then printed and a white sheet and the printed

  Hello

  Please try this:

  Click Start > Search 'printers '.

  Right-click on your printer, and then select Properties

  Select Printing Options and make sure that it is not listed to print to "reverse the order".

• Print the brochure-page editing and print dialog box questions

  Hi people,

  I have a small organic seed in Southern California company and I am looking to do our first seed catalog using what I would describe as a "zine" format: a letter-sized document that is folded, resulting in a booklet composed of half pages (I don't know if there is a more technical term to do this (, please correct me). I use InDesign 5 and Mac OS X Snow Leopard.

  
  

  When I started doing the document, it seemed logical to start with my page as a 'half letter' size, because I had read about the "Print booklet" feature of Adobe that would automatically print the pages in the order appropriate for folding. After doing a few pages of my catalog, I decided to do a test run this function, as I suspected things may be more difficult that it seemed. I ran against two problems while doing so, and I hope someone here can help give me an idea.

  
  

  The first problem is that I can't get the pages to impose properly by adopting a system of alternative numbering on the pages themselves. To explain: I chose '2-top stitching horse' in the settings of the printed booklet. I have a paper of 10 pages of 5 blocks spread. In the menu document, I put my layout to start on page 2 so that gaps appear side by side in the pages. However, I also want page numbers on my zine so I started a new section number (which I gave an A prefix) on what is ultimately the fourth page of the layout. This numbering comes as '1' on the fourth page and produced consecutively from here (pages 4-10, on the spread in the page layout area are labeled 1,2,3,4,5,6,7 on the pages themselves). It seems that booklet printing think my second section (A) on page 1 is where it should start stitching horse formatting. The help section on booklet written print Adobe, 'If you have split the document into sections of page numbers, you should enter section page numbers (for example, Sec2:11) "in the range field.". However, they recommend only do that if you want specific pages to the format ranges, while I would like to format the entire document. However, I tried to do that, suspicious that the first three pages were not formatted properly. However, I could not yet find a way to clarify my section A in the range box. I typed in things like "SecA:1" but I get a message that says: "one or more of the specified pages aren't valid page names." I note when I stripped the formatting of the document the print booklet feature requires the pages in the correct order. Thus, this problem is not the end of the world. However, what I lost is the ability to have numbers of pages printed on my document, unless I want to manually add to each page (and then having to deal with reformatting if I ever add or remove pages of the document in the future).

  
  

  The second and more important problem that I have is to get the pages to print even close correct. I have a printer Brother HL - 5340 D laser has a two-sided feature, and I thought there would be a way to print just two pages of my catalog (half-letter pages) on a letter page size, side by side, double faces and in the right order for folding. After trying a number of different options (by changing the page size and the page orientation in the print area), I was not able to get the printer to print these pages, with success, or even in the right size and orientation - or even on the set of law, indeed. Once I played around with all the settings I managed to pull of "Tray1" (and created a preset in the OS X print settings), but I can't understand how I got this opportunity to stick. Of course, Adobe recommends using their own printer on the Brother driver dialog box, but duplex, for example, is impossible without ebb in the print based on the OS setting. I turned, something that has worked well with other InDesign documents I created. In this case, however, I have not been able for duplex printing to work.

  
  

  I wonder if there are conflicts being created between two printer settings, or maybe I just made a mistake starting my catalog with a letter paper size "half" and now try to print two of my pages letter half on a sheet of letter-sized (and double-sided, at that). As a neophyte InDesign (six months experience) I still wonder if there is something really obvious that I'm missing.

  
  

  Does anyone have a picture of my situation?

  Waiting patiently. Thanks people...

  
  

  Quin

  chirrchirr wrote:

  Peter,

  See the screenshot above (two positions to the top) where I show the "spreads" I made in the document. I have 56 pages in 29 spreads

  The number of "spreads" appearing in the pages Panel is misleading since several ov them don't have only one page. I do not see the whole Board, of course, but my guess is that all the "spreads" we do not have two pages. Normall is the first and the last spread that are singles, but you have done strange things with the numbering.

  In any case, is printing print booklet 28 pages. The only way that can happen if additional blank pages are added is if you did not include the original White you have created. You have to go into setup to display the print dialog box and select include blank pages there.

• Duplexing for LaserJet CM1312 MFP Series PCL 6

  Is the only way to print double-sided on my - referenced above - model to do it manually?  Or is there a part I can buy?

  Thank you.

  Is it is only manual, there is no available for this device duplexers.

• HP LaserJet Professional CP152: update driver HP for HP LaserJet Professional CP1520 Series PCL 6 - error 0 x 80240017

  I get this error message when I check the updates on my 3 Surface:

  Driver HP update for HP LaserJet Professional CP1520 Series PCL 6 - error 0 x 80240017

  However, I have no installed printer HP software. I don't own an HP printer. I tried a lot of solutions of the forums looking online.

  How can I get rid of this error message?

  David

  Thanks for letting me know @DavidMG.

  The link you provided did not open, but I was able to find it, here is the link for anyone else who may need it in the future, How to disable temporarily a Windows Update or driver reinstall Windows 10

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• HP Laserjet M1132 MFP is too slow on the network!

  Hello

  My HP Laserjet M1132 MFP is too slow on the network!

  I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

  I installed the last form HP driver site and update the firmware it the latest version.

  It happens on other Windows XP machines as well.

  I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

  I used the trick of local port on computers remote (instead of the normal method) like this:

  "add a local printer.
  "new port".
  "localport".
  \\XPcomputer\HPPrinterName port name

  but still nothing!

  There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

  I really appreciate your HELP!

  It seems that no one on the planet has the answer to this question!

  The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

  He wat the only solution for me.

• LaserJet 1102w: force print the second page, Laserjet 1102w

  Hello

  New laptop.  I can print fine from the front.  When I try to print double-sided printer, as normal stop, after that the first page is complete, but used 'popup' support to continue does not appear.  OK, I'm working on this one.  But is it possible that I can press something on the printer to say "go ahead, print the second page."?

  Thank you!

  Evan

  Hello @evanmjones,

  It is a great place to get help! I read your post and see that you do not get the option "Continue" to print the second when the double-sided page. I want to help you solve this problem.

  You can continue the second page by opening and closing the printer cover. (this model does not have a resume button)

  Make sure that manual duplex printing option is selected from the printer driver:

  1. Click on the Windows icon (), and then click devices and printers.

  2. Right click on the HP product and then click on printerProperties.

  3. Click the device settings tab.

  4. The manual Duplex allows to "Enabled" and click OK to save the change. (click on the + to expand the list)

  Ensure that the bidirectional Support is enabled.

  Go to start, devices and printers, right click on the printer, the printer properties, click the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  Try to print again.

  If you're still having problems, try printing from another application to see if you have the same results, it could be a setting in the application of double-sided printing.

  You need to maybe uninstall and reinstall the printer if the problem persists.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• HP Deskjet D2660: All prints gives blank Pages

  Hello. We have long used the faithful D2660 to print labels for shipping mostly in black and white. We recently used not printer in over a month, and upon his return, is having problems printing.  It was unusually hot in England during that period and may have caused the problem is perhaps remarkable?

  All attempts to print blank paper to return. The printer goes through the usual movements of printing, but it seems that there is no ink coming out of the cartridge.

  I tried...

  • Insert two offical cartridges with ink left and who does not. The first two were seen correctly make the ink and the third was also properly don't not have ink. It can identify how much ink is left in a cartridge.
  • The toolbox using automated "To clean the print cartridges", "defamation cleaning Page back" and "Test Print-document". Nothing has changed and it printed a blank page.
  • Move the printer cable
  • Grayscale (who oppose black ink only) and checking the size of the page.
  • I have already used the printer on Ubuntu. I started a live CD and tried to print from there, but again without success.
  • Installed the latest drivers from HP.com. It does not appear to say something wrong with the printer.

  Hello @ZackR,

  Welcome to the Forums of HP and thanks for posting!

  I want to help you with the problem of blank print you are having with your HP Deskjet 2660 printer.

  Thanks for the detailed description of the problem and the steps you have taken to try to solve it. Looks like the ink in your cartridges can have dried in the hot season (this is especially likely if you have had their printer output).

  I would recommend looking on the steps in this document, to see if there is nothing, you may have missed:

  HP Deskjet D2600 series printers - troubleshooting print quality issues

  If the problem persists, I strongly recommend replacing your cartridges, because it seems that the printer itself works fine.

  I hope this helps!

  

• Form to be completed online will not print the second page

  I created a form with two page Acrobat with Adobe InDesign.  Everything seems to be in agreement with the form, except that the second page does not print.  The first page prints fine, but the second page closes like a blank page without content in the form or the data entered by the user.

  2012-2013 development funding application

  Thanks to you all.  My Department has been able to help me.  Because the form was created in InDesign, I've exported as an interactive PDF and could not change the printing options.  Something in the configuration of InDesign required Postscript drivers and all our internal printers contain PCL drivers.  They added the PS drivers and we are now able to print the second page.

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.