HP LaserJet MFP M127fn Pro: Erro scanner 13

Similar Questions

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• HP LaserJet MFP M127fn Pro: No option to scan/administration in HP LaserJet MFP M127fn Pro

  Hello

  We just purchased the MFP HP LaserJet Pro M127fn, and after reviewing several videos from HP support, he showed that all of the devices in the Laserjet Pro should support the scan to network folder option.

  I've updated the device to the latest firmware, performed a hard reset on the device, and yet I can't get the Scan option to work at all.

  I should clarify that the unit is configured via the IP network, I can log in, feel to it (the fax will not be used at all), but the requirement of the majority of this device is to analyze the files.

  I need this feature to support scanning directly to the network (without the need to run the software on a machine to make the scan).

  I have re-installed the download pack full pilot time on the CD, but also the drivers download site, and little matter what I do, I get not the scan configures network folder option. I have only the HP scan option (which is essentially useless to me).

  If the Scan to network folder is unavailable for this device, I need to know that.

  Thank you in advance,

  Oliver

  So I decided to call HP Business Support... what a waste of time udder.

  Because I connect this device via the network through a switch, they cannot support this configuration... uh what?

  I then asked, this devices support analysis to the network option, she did some research, and it came back as not supported.

  So, despite site Web HP's own ( http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03953940 ) saying that all LaserJet PRO devices are supported, this turns out not to be the case at all.

  So either HP is clearly on their products, or their business support is frankly stupid, that they have no idea how to do to resolve their own devices.

  Needless to say, it returned, and I'll go with one of the competitors of HP. Just dumb business.

• HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

  This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

  I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

  Thank you.

  Hello

  Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

  Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

  In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

  Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

  Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

  Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

  From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

  Now, try to reinstall the most recent drivers and check for the difference.

• HP LaserJet MFP M127fn Pro: How to reset the password or what is the default password

  I have a M127fn of MFP HP LaserJet Pro, I can't access the menu, he continues to ask for a password and for the life of me I'm not rember defining one. Is there a way to reset it and if so what is the default password.

  Thank you

  Hello

  Please see the sent private message now.

  You can see by clicking on the icon of the envelope at the top right of this page

• HP LaserJet MFP M127fn Pro: Cannot save a HP LaserJet Pro M127fn MFP scan after update Mac Sierra

  I have a HP printer/scanner/fax multifunction, and after updating my Mac OS X Sierra, the "HP Scan" app does not allow me to save my scans more. Printing seems to work very well. Scanning occurs, but when it comes to saving what I scanned, 'save' button is grayed. I have read elsewhere on the forum than what has happened to other people using ordinary scanners (not multifunction units), but the software offered for regular scanners would not apply to my device.

  Hello

  It is incompatible with the Sierra of HP scanning.

  Download and use HP Easy Scan instead, it can be downloaded from the link below:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Kind regards

  Shlomi

• M127fn LaserJet MFP Pro: Installation of the LaserJet MFP M127fn Pro software

  I installed the M127fn as a network printer on 5 machines without problem, MAC, Win Vista, Win 7 and Win 8.1 (2).  However on another machine, also running 8.1 Win, preparation for installation is at 73% and fails with the following: "error A problem occurred when the preparation install the software in your system."  If please restart your computer and run this installer again.  If the problem persists, please visit the web site of product support for your product. "She does it with both the software on the CD as well as the version of downloader.  I'm her disabled administrator with Norton Internet Security and Malware Bytes.  I used the uninstall on the CD several times to remove any partially installed files does not.

  Using Windows update solved the problem.  She provided 2 updates pertaining to the M127fn.

• LaserJet MFP M127fn Pro: Scanning error RAM

  Hello

  I'm trying to scan a document. I open the HP scanning software and try a scan. The overview of the charges on 3/4ths of the way and then disappears. It is said he scanned and I can choose where to save it.  As soon as I did this, I get an error.

  "There are not enough available RAM to complete the scan. Please, reduce the resolution setting and try again.

  I stoop to the lowest option available 75 dpi, and I still get the same error. My system has 4 GB of RAM and only half is used. So I guess it's a software issue that brings up another question. The HP software will not uninstall.

  "An error occurred during the installation. If please restart your computer and try again. »

  So, naturally, I reboot and try again. It will not uninstall. It won't even uninstall in safe mode. I tried to use Revo and he used to uninstall with either. I called HP Support and they told me to reinstall my OS... Please point me in the right direction. An assistance is greatly appreciated.

  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.151230) - 0600
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: G31M-ES2L
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel (r) Core (TM) 2 CPU Quad Q8300 @ 2.50 GHz (4 CPUs), ~2.5GHz
  Memory: 4096 MB RAM
  Available OS memory: 4094 MB RAM
  Page file: 1720MB used, 6467 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 32 bit Unicode

  rb011,

  I emptied all the temporary files, empty the bin recycling and rebooted. No change at all. I have however decide to upgrade to Windows 10. After the upgrade, everything works without error. I don't know exactly what it was, but the upgrade set. Thank you for your time and effort!

• HP laserjet mfp m127fn pro: cannot install printer

  Hi I do not know how to install the drivers and software for this printer, can anyone help out me?
  Thank you

  Hello

  Can try to uninstall and reinstall the drivers?

  Thank you.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• HP LaserJet MFP M127fn Pro: collect

  It is possible to interclasser multiple copies on this printer?   If yes how to set you up?

  Hello

  Click on the settings menu to copy on the front panel of the printer, it's the button down on the right, just below the Cancel button.

  Using the arrows go in the standings, and press OK.

  Set it on and then press the Start button.

  Kind regards.

  Shlomi

• LaserJet MFP M127fn Pro: Unable to update the firmware on M127fn

  Hi and thanks for the support.

  I can't update the firmware.

  I downloaded firmware update and it launched.

  It does not find the printer.

  I'm sure that the rated requirements.

  I can print.

  It is turned on and connected via USB.

  He does not sleep.

  There seems to not be any error/malfunction.

  I tried as an administrator.

  I have some unrecognized devices in Device Manager. Perhaps, which could be related? Something with the USB drivers, maybe?

  Hi mightyiam ,

  Thanks for letting me know. Since you are able to print with the older USB cable, it should not be a problem. Now if you had intermittent printing problems, then it could very well be caused by the cable. If you have a spare a kicking around, you could try, just to exclude.

  As the firmware will not update, I suggest to call our technical support at the 800-474-6836 and inquire about a replacement printer. If you don't care to worry about the update of the firmware, you can decide what you want to do. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you.

• HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

  My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

  1. save my settings,

  2 tell the scanner if I want to do an overview of the control program to display,

  3 Let me drag a border to select the section of the preview I want scanned.

  4 tell the scanner to scan,

  5. display the scanned image or document,

  6 ask if I have another page in the same document,

  7. save the image or document where I want, with a name I go,

  8. save images in different formats,

  9 save documents in the .docx format, .tif and a few other formats.

  10. documents of OCR.

  My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

  Can anyone recommend such a program?

  Thank you.

  Hello

  Its specifications:

  • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
  • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
  • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

  Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

  Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

  For Windows, try it please:

  http://free-OCR-to-Word.en.softonic.com/
  http://www.free-OCR.com/

  for Word:

  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Good luck.

• HP LaserJet MFP M127fw Pro: Strange behavior M127

  I just bought HP LaserJet MFP M127fw Pro and it was so easy and simple.

  I can Scanner normally, normally copy and print reports of device HP normally Toolbox.

  However, when I try to print from MS word or any other product from MS Office, it shows without a job sent to all, professionals or even PDF reader on your same question.

  If it was at this point that I would have thought it's a software issue, but when I try to print the test printer properties page it fails. The question most unusual that I can print from notepad normally.

  So, in short, as I think, I can print from windows-based software, but no third-party applications of parity and print test page fails.

  If no support to such a question.

  I realize the error that my camera was set to a development environment where the Temp environmental values has been relocated to speed up windows. When everything got back to the original state, everything has worked perfectly. Thanks for the support.

• LaserJet MFP M127fw Pro: Easy Scan

  Hello

  I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

  Appreciate any help.

  Thank you very much

  I'm responding to and mark my own post as solved.

  The solution was simple and as always, was not a problem with the system as much as the operator...

  Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

  See you soon

  Stig

• The windows firewall settings 7 HP LaserJet MFP M127fw Pro

  Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

  A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

  Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

  and the printer goes to sleep...

  I am on a 3 MB connection WiFi ISP... I'm just too impatient?

  The firewall settings windows I have to do?

  Any ideas?

  Windows 7 Home Premium 64-bit

  Gigabyte Intel I7 W

  16 GB OF RAM

  Hi @CCcrider

  Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.