HP LaserJet MFP M127fw Pro do not print

Just bought a M127fw of MFP HP LaserJet Pro and is about to return it for a refund.

While it will print a diagnostics page and the copier seems to work, it will not display a wireless information page, and I can't seem to print a document from my PC, phone, ePrint or any other method.

I tried to print the information page of the front panel of the printer as well as the web server.  In both cases, clicking the button simply does nothing.  The printer displays no message indicating a problem.

I have connected the printer to my Ubuntu PC (tried JetDirect/AppSocket and IPP), but the print job hangs just with "treatment" or "stopped".

I have connected the printer to my Android phone, but just printing crashes.

I have connected the printer to service of HP ePrint (using the email address listed by my printer).  Here it shows 'Problem with printer', which is my only indication that something is wrong.  The site directs me to check the front panel of the printer for more information, but there is nothing there.

I don't know what else to try here.

Resolved in this post: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-LaserJet-Pro-MFP-M127fw-will-not-print-anything-except/m-p/3836740/highlight/false#M52766

Tags: HP Printers

Similar Questions

  • HP LaserJet MFP M127fw Pro do not print anything other than its own config

    Just bought a MFP HP LaserJet Pro M127fw.  I can't do print using any kind of connection to the printer.

    I can connect to my Ubuntu PC printer and my Android phone, but when I try to print, the job just hangs, never the slightest error, but never finished.  I tried printing from various applications, including tools HPLIP, but reports of the use of a test 'treatment' page

    When I try to print a fact sheet on the front panel of the printer, it asks me to confirm, but then nothing happens.

    I can connect to the web server of the printer, but clicking the print information button it does nothing.

    I have connected successfully with ePrint service of HP using the email address declared of the printer, but reports of the service 'problem with printer '.

    I don't know what else to try here.

    Hi richRemer,

    I see that you are having problems printing from the computer and the Android phone.
    I'll be happy to help you.

    Cycle power to the router and the computer.

    I would do a power reset the printer. When the printer is still lit, disconnect the power cable from the back of the printer. Then, disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

    Print a self test equipment. Find out what is the IP address.

    Print a Configuration report.

    I provided with the driver for Linux OS Support.

    If you still have questions please go to the page of Linux support.

    Thank you.

  • LaserJet Pro M127fw MFP: LaserJet MFP M127fw Pro does not

    The MFP M127fw lives on my network.  It is used by several machines - Win7, Ubuntu Linux, Win10, etc.  It works fine for a while - as a few hours, but then enters a State where it will not accept any job.  A power reset always bring it back.

    This seems to happen little matter if I connect via WiFi or Ethernet.  The printer will just "deaf" to jobs.  The interface of the web server is not affected.

    I get tired of the power, deactivation / activation of routine.  What should do?

    TIA

    Martin

    The solution to this problem was to remove the router, Asus RT-N66U and return to the DPC3941T of Comcast/Xfinity/Cisco. Somehow the combination of Asus and Cisco (in transition mode) was not managing printers LaserJet network correctly.  More info on my blog.

    Thanks for your help!

    Martin

  • HP LaserJet Pro M127fw MFP: HP LaserJet MFP M127fw Pro will not copy or scan

    Our printer is used in a small office of 15 person. Scanning and copying capabilities have suddenly stopped working. We tried the following:

    1. Shooting / disconnecting device/restart
    2. Uninstall & reinstall drivers
    3. HP Print and Scan Doctor

    The HP print and Scan doctor provides these results after using the function of the difficulty of analysis:

    • Windows (WIA) Scan error: Scan process was cancelled by the user.
    • HP Twain Scan error: the scanning process was cancelled by the user.
    • HP Scan: success

    Note: I have not personally cancel the process leading to errors in scanning.

    When scanning:

    The scan dialog shows a progress bar and pages preview 0/0.

    When copying:

    Displays "Calibration" with a loading screen before returning to the home menu. Usually, there is a progress bar of the item being analyzed. The scanner itself does not react/move when you press copy.

    Thank you, Gemini02. We called HP and determined that the bulb was blown. We will get a replacement under warranty. I wonder if there are printers that can notify you when something like that happened, as when it is necessary to replace toner.

  • The windows firewall settings 7 HP LaserJet MFP M127fw Pro

    Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

    A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

    Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

    and the printer goes to sleep...

    I am on a 3 MB connection WiFi ISP... I'm just too impatient?

    The firewall settings windows I have to do?

    Any ideas?

    Windows 7 Home Premium 64-bit

    Gigabyte Intel I7 W

    16 GB OF RAM

    Hi @CCcrider

    Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

    Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

    Please let me know the results.

  • HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

    My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

    1. save my settings,

    2 tell the scanner if I want to do an overview of the control program to display,

    3 Let me drag a border to select the section of the preview I want scanned.

    4 tell the scanner to scan,

    5. display the scanned image or document,

    6 ask if I have another page in the same document,

    7. save the image or document where I want, with a name I go,

    8. save images in different formats,

    9 save documents in the .docx format, .tif and a few other formats.

    10. documents of OCR.

    My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

    Can anyone recommend such a program?

    Thank you.

    Hello

    Its specifications:

    • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
    • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
    • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

    Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

    Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

    For Windows, try it please:

    http://free-OCR-to-Word.en.softonic.com/
    http://www.free-OCR.com/

    for Word:

    http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

    Good luck.

  • LaserJet MFP M127fw Pro: Easy Scan

    Hello

    I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

    Appreciate any help.

    Thank you very much

    I'm responding to and mark my own post as solved.

    The solution was simple and as always, was not a problem with the system as much as the operator...

    Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

    See you soon

    Stig

  • HP LaserJet MFP M127fw Pro: Strange behavior M127

    I just bought HP LaserJet MFP M127fw Pro and it was so easy and simple.

    I can Scanner normally, normally copy and print reports of device HP normally Toolbox.

    However, when I try to print from MS word or any other product from MS Office, it shows without a job sent to all, professionals or even PDF reader on your same question.

    If it was at this point that I would have thought it's a software issue, but when I try to print the test printer properties page it fails. The question most unusual that I can print from notepad normally.

    So, in short, as I think, I can print from windows-based software, but no third-party applications of parity and print test page fails.

    If no support to such a question.

    I realize the error that my camera was set to a development environment where the Temp environmental values has been relocated to speed up windows. When everything got back to the original state, everything has worked perfectly. Thanks for the support.

  • HP LaserJet MFP M127fw Pro: Range for install MFP HP LaserJet Pro M127fw does not work

    I have a HP LaserJet Pro MFP M127fw, I managed to connect to my office at once. It is connected to my wireless network. For some unknown reason, she has not recently, and I spent hours trying to re - install the drivers without success. The installation program will not recognize or find the wireless printer and when I use a USB cable, the software displays an error after a very long install to be cancelled because there is no other option to clear the error at the level of the 99% mark. There was no facility with the printer CD (bought new). Ideas?

    Gemini02, thanks for the post but you didn't have enough info (my fault). HP Installer errors on 99% install marks indicating that it took too much time. I have the same drivers that you said and tried your solution without success. Setup can not see even the printer on the network on a normal attempt while Windows Add printer recognizes it immediately. I gave up the HP installer who never really worked well, even on the first installation and let Windows install using the extracted files of the HP driver. In regards to the scanner, I also leave Windows Installer and if I can't use the HP interface, the Windows generic works as well.

    For your info, I'm on Windows 7 Home Premium on an HP P6820 with a Pentium Dual Core E6800 3.33 GHz CPU, 4 GB of RAM. The printer is less than 6 months old and because of the problems regular installation with the HP software installed as disappears from the active list of printers.

    Thanks for your help, but I'll stick with Windows Setup instead of the HP Installer.

  • Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

    I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

    It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

    Hey @nhorn1115,

    Welcome to the Forums of HP Support!

    I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

    1. Click on the configuration icon that looks like a key.
    2. Click on Service.
    3. Click Fax Service.
    4. Click clear saved faxes.
    5. Connect the cable of the fax.

    Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • LaserJet MFP M127fw Pro: Original output cartridge

    ONLY 1 100 PAGES PRINTED FROM THE ORIGINAL CARTRIDGE
    Bought in early April 2016 - this seems to be VERY BAD PERFORMANCE for this type of printer. It is used for the purposes of the home based business - for most of the documents; some pages with photos. Is - this common place to ship new products with ONLY the STARTUP CARTRIDGES that will NOT stand the number of pages suggested.
    When talking with the representative of HP on the phone at the time of the purchase, I asked specifically to this subject. He told me that NO, it isn't the case that the cartridge is only a start unit and that I would wait full and superior performance when buying original HP products.
    This was NOT my experience to date. -Just say...

    Hello

    Its specifications:

    Cartridge included start-up; ~ 700 pages based on ISO 19752 and continuous printing. Average of declared performance replacement cartridge ~ 1500 pages based on ISO 19752 and continuous maint. actual yields vary considerably according to the images printed and other factors. For more information, visit: hp.com/go/learnaboutsupplies

    Source: http://store.HP.com/us/en/PDP/HP-LaserJet-Pro-MFP-m127fw  

    We (users) expect can only get about 80-85% of these numbers or 1 200 pages to 1 275 pages if CONTINUOUS PRINTING (without interruption, not inactive) because every time the printer begins it will consume a lot of inks/toners.

    From my calculations, I sometimes see 1,100 pages with a mixture of images is acceptable.

    Kind regards.

  • LaserJet MFP M277dw Pro: problem with printing issue

    We have the model HP laserjet MFP M277dw, we love it, but have been a problem with what looks like small pink flies on one side of the paper when it is printed, is there a setting that turns off or what is the cause, thank you

    UPDATE: took MFP and was checked by techie printer, tried a new toner and does no differenct so he rang HP and they replaced the MFP, it was still under warranty

    Thanks to those who have tried to help

  • LaserJet MFP M127fw Pro: Scanning but does not print: print jobs that are just sitting in the queue

    I tried several fixes and nothing has worked.

    Uninstalling the software and printer and reinstalled from scratch.  Can see and scan, but never leave print jobs queue on the laptop

    HP Print ran and doctor Scan.  Could not get out print job, it becomes its own test in-house printer print

    I use wireless.  I tried as well to turn off wireless and use the wire and still get the same results.

    Hello

    I think you need to delete the queue. For Windows, try it please:

    Hold down the Windows key and press R.
    from the run window, type services.msc and press to enter.
    If the computer asks you to Admin, you have to accept that,
    regarder watch down to the print spooler service, right-click and select Properties
    Click the Stop button,
    Go to C:\Windows\System32\Spool\printers or C:\Windows\System\Spool\printers
    delete the job inside this folder
    restart the machine.

    Kind regards.

  • HP LaserJet MFP M127fw Pro: How can I set a password for my printer?

    Hello

    I managed to set up my new HP LaserJet printer. It is connected to our wireless network.

    I would like to put a password so that only those with the password can access the printer.

    How can I do? I'm not very good with tips and computer network.

    Thank you.

    Download the manual here.  The user's Guide.

    http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M127-series/5396666/model/5303419/manuals

    Read how to have an admin password.

  • LaserJet MFP M127fw pro: laserjet mfp pro ME bit do not copy

    Our Laser Jet Pro MFP M 127fw Copier stopped the copy and we can no longer send faxes.

    We can get the incoming faxes and print the things at the request of the computer.

    We plugged the printer on a vs output use a surge protector to see if it helps, it does not.

    Hi Stacy13,

    Sorry to hear that we were not able to solve the problem. It may be a hardware problem with the printer or a sensor.

    Because the printer is in a year, please call our technical support at the 800-474-6836 and inquire about a replacement printer.  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Please let me know the results.

    Thank you.

Maybe you are looking for

  • behavior of el capitan premiere tickets

    Dear all, This is a minor issue, but I was wondering if anyone had a solution for this yet. I use frequently and often use the Notes feature to mark scenarios.  Recently, the notes started to blink, or maybe even opened twice in quick succession, whe

  • Tecra A7 PTA71E - Win XP BSOD

    Hello Since 2007, I have my Tecra. I bought it with win XP. Until the middle of 2011 OS works OK, but not later. When I turned toward the top of the computer, it starts and when the Office was running, I just started with the trackpad or USB mouse on

  • Levenberg Marquardt

  • computer restarts just when I try to close it

    Help, please! After that my last series of automatic update of my windows XP my computer now just restart when I try to stop it

  • New e-4200 signal strength

    I went out and bought an e4200 today and the signal strength is worse that my WGT300n, are there settings that I can do to increase my signal strength? I have read the posts and cannot find anything.