HP Laserjet MFP M175nw: New router just won't recognize the printer - Laserjet MFP M175nw

Hi all.

It's probably a little deeper than a problem of means.

My printer above works fine on my 2 other routers modems, even now.

I got a new modem / router from Telstra, Technicolor TG797n v3 model.

A number of home devices works fine with this, including computers, phones and ipads, AND EVEN an ANOTHER PRINTER HP (Laserjet CP1025nw).

However, it simply will not recognize the MFP M175nw. I tried so many ways, restarts and redefinitions, plant a certain number of times. Tried of WPS WPS PIN code wit and EVEN directly connect to the router with a Ethernet cable. -Do anything, router simply does not see the printer.

I even did an update of the firmware on the printer. Still not good.

I even downloaded and run the HP print and Scan Doctor - even this program cannot find this printer.

Any help would be greatly appreciated.

Thank you.

-Fauzer.

Hi, congratulations for the suggestion. As it is a House that is put in place, the budget is a consideration.

My linksys WAG325n is still in good condition and managed all of the printers and devices witout a problem.

I'll try to do my gateway Tehcnicolor a pure way and the linksys router.

I don't know exactly how to do right now, but I'll have a go, if you have any indication at the same time, please share.

Thanks heaps.

-Fauzer.

Tags: HP Printers

Similar Questions

  • How can I get my new router (Netgear N150) to recognize my HP Officejet Pro L7580

    Problems with getting the router to recognize the printer.  Any ideas on that?

    Welcome to the HP Forum!

    carbonant wrote:

    Problems with getting the router to recognize the printer.  Any ideas on that?

    It will depend on if you are using a wired or wireless connection.

    Your router is a router WNR-1000? NETGEAR N150 is just a designation of bandwidth. It applies to a lot of models that NETGEAR. Look at the back of the router for the sticker.

    Wired is simple. CAT5 cable allows you to connect to the router and configure the router as DNS server in its web graphical user interface.

    Kind regards
    ERICO

  • I just bought a new computer and is not recognize my printer. I now have windows 7

    I just bought a new computer and is not recognize my printer. I now have windows 7. Need answers please. Thank you.

    Try to update the driver for it.

  • HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

    I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

    Hi @lelg,

    I understand that you want to configure the printer on the wireless network. I can help you with this.

    Uninstall the printer software.

    Uninstalling the printer software.

    Restore the default settings of the printer.

    Go to Configuration, restore the default values.

    Cycle power to the router and the computer.

    Run the installer on the printer wireless.

    Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

    Print a configuration page to get the IP address of the printer.

    Print a Configuration report.

    Select the method.

    If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

    If it loads the page from the network printer then the printer is on the network.

    Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

    Select your operating system, click Next and click on the software to download and install.

    Test the printer.

    What operating system do you use? How to find the Windows Edition and the Version on your computer.

    Please provide detailed results if you're still having problems.

    Good day!
    Thank you.

  • 4630 won't recognize scanner - printer and utility connect properly

    4630 won't recognize scanner - printer and utility connect correctly.

    Downloaded the software for Mac OS 10.10 altest, but he still does not see the scanner.

    Help, please!

    I uninstalled and reinstalled and it works again.

    Thank you

  • IF THE NEW COLOR CARTRIDGE IS INSERTED IN THE PRINTER TO SEE HOW LONG IT TAKES TO CARTRIDGE IS EMPTY.

    OUR HP PRINTER NAME IS J3608ALL ALL-IN-ONE HP OFFICEJET. PORT DOT4_001MODEL CB07QA. OUR OPERATING SYSTEM IS WINDOWS XP, IF THE NEW COLOR CARTRIDGE IS INSERTED IN THE PRINTER FOR HOW LONG TAKES IT FOR CARTRIDGE IS EMPTY. ALSO, PLEASE INFORM HOW MANY A4 PAGES CAN BE PRINTED NORMALLY WITH THIS CARTRIDGE.

    Hello ImranNagoor

    It depends on print quality settings what you use with the printer as well as other factors such as the HP cartridges. You can see the available black and tricolor cartridges available for Officejet J3608 at the following link, including the returns estimated for each Page. To use the least ink use quick project for a print quality.

    HP Suresupply (Officejet J3608)

    Also for more information about how we measure the ink Yield the article below.

    How to give inkjet HP measures page

  • Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Any ideas out there?
    I know the pro 2 surface is not the real model, but at least it should work fine.

    arwinq,

    You can see the system requirements, including the maps here.

    https://helpx.Adobe.com/Illustrator/system-requirements.html

    but I fear that you may be taken in this GPU issue described by butz in post #13 here:

    https://forums.Adobe.com/message/7773402#7773402

    You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

  • I installed a new router. Now, one of the PC will not allow the rest of the pc s are there to connect. He is able to connect to each computer on the network. I can't find the question, any help?

    I have checked the computer name, sharing, turned off the firewall.  Still can't find the question.

    I've corrected in fact accidentally the problem today.  I uninstalled a Malware program and tada!, the other pc on the network were immediately able to access the XP pc.  The 'good' pc was always able to access internet, router, network between them.  The only problem we had was the 'bad' pc was able to connect at all, but the 'good' pc were unable to connect to the computer of 'bad '.

  • Windows 7 won't recognize the external hard drive

    I had to install windows on my laptop again, so its new facility now. Installed all the drivers and updates, connected my seagate 1 TB hard drive in it and it will not be displayed in my computer. He worked on this laptop until I reinstalled windows. I've lived a lot of discussions about this, and none of the solutions have worked. It appears in Device Manager and in disk management. It is not a drive letter assigned and it won't let me assign one, it is grayed out the only option I have is to help. I downloaded partition Wizard mini tool and assigned letter through it still doesn't appear in my computer or have the letter assigned in disk management. don't see the drive in diskpart in cmd (as some people suggest to change the letter here.) can anyone help please I'm going out of my mind because this hard drive has info on I need to don't want to lose him.

    It is displayed in the Device Manager as healthy, not corrupted and is online.

    Thanks for responding.

    I just convert to gpt on the mbr to the mini program partition and it is now recognized by windows. and all files are there.

  • Wireless router has been reset, now the printer does not print wireless, cannot use the CD to reinstall the

    After our wireless router has been reset, our printer lost its ability to print wireless.  The error message indicates that the printer settings are not compatible with the settings of the wireless router. My CDROM drive is not working so I can just uninstall and reinstall it with the CD.  How can I change the printer settings to match the settings on my router?

    Hi there adamkarin,

    Thanks for your info!

    This is the link that you need to help set up the printer on your wireless network.

    Installation of the printer software for a network connection Wireless (via an Access Point)

    Good luck

  • New portable Windows 8 does not recognize the printer, even if the printer says that it is connected.

    My old laptop fried, so I bought a new laptop which had Windows 8.  My printer is a Photosmart 5510 series B111A #CQ176A and at first my printer was not compatible, so I downloaded the software from the HP that make compatible site.  It worked, but then I was printing my grades I dreamily turned off my laptop.  The printer stopped at halfway, so I turned on my computer laptop back but the printer does not continue.  I cancelled the event and tried to reprint it, but then my printer not responding.  All my reprints AND the original print stuck in the queue and my microsoft word (2013) says the printer is offline, but the printer itself said it was online and connected.  I tried the HP Scan doctor or what it's called and it said nothing was wrong and it printed a test page. However, when I tried to copy my notes he would not answer.

    Finally, I uninstalled the software and reinstalled.  He said that my printer connected successfully, but microsoft word does even not list my printer even if my printer says that it is connected.

    Nobody knows how to help me?  I'm not very technical so please, if you could provide easy to follow instructions, I would be grateful, thank you.

    Take a look at this linkHP.

  • Router Netgear does not recognize the HP Photosmart 8750 (wired connection)

    My Netgear WNDR3300 router seems to block my ethernet connected the HP Photosmart 8750 printer. The printer does not appear in the list of the router of connected devices and network printing shows that the network status is offline.

    How can I get the printer and the router to talk to each other?

    Also, I checked the cable and tried to use a different port on the router; no change.

    Found the problem...

    I shined a flashlight in ethernet printer ports and found two sons/connections are folded. :-(

    If all goes well, not too expensive to fix.

  • Adobe Acrobat Pro DC student and teacher edition - Amaozon bought for 2 times 10 Windows operating system won't recognize the disc and display the icon of Adobe.  It appears on avle

    Hello people

    Received the replacement drive - thank you.  However as before when I go to install the drive on my computer does not display the content of the program.  He treats the drive as if it were a blank disc and asks if the disk needs to be formatted.  The player does not display the name of Adobe Acrobat and if you click the drive the little swirly just keep swirling.  The name of the program does not appear and when you click on install nothing happens.  My computer is a Windows 10 operating system. I pass the proof of eligibility and received a serial number, but I never get the installation program.

    I went to a friend and we tried the drive of his computer to Windows 7 and the name of the program showed when you click top started to install.  My friends computer is a Windows 7.

    Is it possible that the revised version Adobe Acrobat Pro DC isn't 10 compatible windows?  Why am I having this problem?  Are you able to help me?  I can / t believe Windows 10 and Adobe Acrobat Pro DC would not compatible 6 months after upgrading Windows 10.

    I appreciate your response and your help.

    Hi waso33,

    Please use this link to download & install the program on your system:- https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

    And then using the serial number that you can activate the program.

    Let me know if any problem will persist.

    Kind regards

    Christian

  • Extractor to update and the new support site did not recognize the ThinkCentre A63 5237-CTO

    I'm unable to get support for a ThinkCentre A63 - machine type 5237-CTO, which I am responsible. Using the method of the fast lane, I get a message: "no product found matching your criteria. Refer to the above tips.

    Update Extractor (version 4.02.0011) indicates "no new update not found for systems you specified", and if you select "Show the results of the query" we inform you that 'catalogue file not found' for 5237-Windows XP - English.

    I can now confirm that the update system recognizes the ThinkCentre A63 5237-CTO (English Win XP).  I could correctly download the latest bios UPDATE earlier this evening. Thank you.

  • just bought Nikon D750 and won't recognize the files NEF - made updates, downloaded camera Raw 9.1 and still no go - works without problem on lightroom - suggestions?

    looked on the FAQ and made their recommendations and still not recognition

    Have you used the Nikon software to download files? This has been known to corrupt the files so that they will not open in Bridge or Photoshop.

Maybe you are looking for