HP LaserJet MFP Pro M127fw Installer has stopped working

Have difficulty installing drivers HP LaserJet MFP M127fw Pro portable 32-bit hp with windows 7

Build in software printer stops at Midway

Downloaded software stops at Midway

Printer driver standard windows 7 works very well and can print with it, but has no scanner driver

Doctor scanner HP printer indicates the scan software is not installed and directing me to download driver on the hp website

installation of this software also stops at Midway

No errorcodes anywhere, box Installer just message could not continue and try to find a solution. This box diapears as well.

Installation fails on cable network and usb

no error messages in the logs of windows

The http connection works fine

tried installing with smart installation on and outside (is disabled for the moment)

Spooler service works well

We searched this forum more people seem to have this problem but there is no solution mentioned in the end.

Help, please

@Gemini02

Thank you for your help.

I'm afraid it does not either, I don't use McAfee but Avast.

Stop Avast, or stop the firewall (windows standard) does not resolve the inability to run the installation software.

If I unplug the USB cable, the virtual CD in the printer disappears and so cannot run uninstall.

I didn't want to stop all services, because I don't know what he must stop and don't want other problems that may be difficult for me to correct after a reboot.

Also, I didn't want to install as administrator, I cannot guess.

My solution that worked in the end is:

Connected the USB cable.

A printer icon appears but with red crosses indicating missing and software scanner fax.

Right-click on this icon of the USB printer and select software update. the research on the internet.

Downloaded and installed the correct software without problems.

I cannot now use the scanner software using the network (wired), but I can live with that.

The printer works fine on the network. Scanner only via USB.

Again, thank you for your help.

This band of turnover can be now closed.

Tags: HP Printers

Similar Questions

  • Cannot install Windows PLUS updates. -Modules Windows Installer has stopped working...

    original title: cannot install MORE Windows updates.

    Greetings, people. My computer will download, but not install many of the windows updated.

    I think it's because of 'message "Windows Modules Installer has stopped working and was closed". Is this correct?

    Can I fix it myself? Thank you, Bob

    Hello

    try looking here's FixIt pro windows update:

    http://support.Microsoft.com/kb/971058/en

    LC

  • Windows Update, error: "Windows Modules Installer has stopped working and was closed".

    Whenever I run windows update, and try to install an update for Vista, I get the error message"

    "Windows Modules Installer has stopped working and was closed"

    . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

    Thank you

    Luke

    Hi guys

    I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

    Thank you

    Luke

  • Windows Installer has stopped working and access is denied installation KB942288-V3

    original title: Windows XP SP3 installation problem

    My windows installer has stopped working. I tried several 'fixed' found on the net, but nothing is done and would be grateful if someone could guide me through the solution.   Windows XP, SP3.

    In 'Services', 'Windows Installer' has been designated 'disabled '.   I changed this "manual".

    msiexec /unreg works ok.
    msiexec/regserver gives an error: "an event could not invoke any of the Subscriber.

    I have downlaoded and ran KB942288-V3 and got ' Setup error.   Access is denied. "

    I watched the permissions in the registry and seems to have all the permissions are ok, but maybe I'm looking in the wrong place?

    Thanks for any help

    Hello Kaiser,

    I would say that if you update your PC from SP2 to SP3 all your files will remain same.

    Once you do a new Installation or a custom don't store all your network cards and other device drivers.

  • Windows Installer has stopped working on Vista Ultimate 64 - bit SP2

    Hello

    My Windows Installer has stopped working all of a sudden (probably common last week).  I get no error message at all.  It simply doesn't get it.  The programs can be installed and uninstalled by there own systems updated, but the changes are not reflected in "programs and features".  When I ask Windows Installer to run under programs and features, I get the usual verification pop-ups, but once I click on the last approval, nothing happens.

    I tried to install a new Windows Installer from the Microsoft Download site and each time, the program "check updates" and I get an error message that says "this update does not apply to your version," (to paraphrase).  I tried to install Windows 6.0, v-2, x 64, but when it does not work I tried all (LOL) with the same result.

    At first I thought that my computer can was struck by a malicious code, so I ran MSE, remove malicious software (FULL) Windows for January and Advanced System Care 3.  All scans is come-up 100% clean!

    I tried to restore my computer to a point 3 days does not.  As Murphy's law would have, I disabled the restore before January 12 points.

    Windows Update online might work.  I get notifications for optional updates for MSE and AFAIK, they are applied.

    Edit: One more important thing, the uninstall on Advanced System Care 3 feature does more either.  It's almost like the hooks to the installer of Windows have been removed to that also.

    Installation service seems to be very well and the value 'manual '.

    Any thoughts on the subject?  I can reload Windows from "day 1", but would rather not.  Laughing out loud.  I have my drive so.  :-)

    Thanks in advance for your help.

    Intel DG-965WH
    Intel Dual Core 2 Duo E6300
    4 gig of RAM @ 800 MHz
    Windows Vista Ultimate 64
    NVIDIA 8500 GT (512 MB)


    A BIG 'Thank you' to Marilyn!

    -----------------------------------

    Start, CMD (run as administrator), sfc/scannow worked!

    Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.  (C:\Windows\Logs\CBS\CBS.log)

    Why doesn't Windows come with a BACK order book any more?

    Thanks Marilyn!  You get a GOLD STAR for today!  :-)

  • Windows Installer has stopped working.

    Whenever I try to install anything I get this: "Windows Installer has stopped working".

    Problem started yesterday or today. Don't know if this has nothing to do with what's going on, but the computer had a blue screen when running a scan with Norton antivirus.

    When I entered msiexec /? I get the same thing: "Windows Installer has stopped working".

    -----

    Also if I go here C:\Windows\SysWOW64 perform msiexec.exe it I get this:

    Windows® Installer. V 4.5.6002.18005

    msiexec/option [optional parameter]

    Installation options
       
    Installs or configures a product
    /a
    Administrative installation - installs a product on the network
    /j [/t ] [/g ]
    Publishes a product - m for all users, allows the current user
       
    Uninstalls the product
    Display options
    / quiet
    Quiet mode, no user interaction
    / passive
    Automatic mode - only progress bar
    / q [n | b | r | f]
    Sets the user interface level
    n no user interface
    b Basic UI
    r reduced UI
    f-full UI (default)
    / Help
    Help information
    Restart options
    /norestart
    Do not restart after the installation is complete
    /promptrestart
    Prompts the user to restart if necessary
    /forcerestart
    Always restarts the computer after installation
    Logging options
    / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
    i status messages
    w warnings recoverable
    e-all error messages
    a startup of actions
    r registers of the specific action of the
    u user requests
    c initial UI parameters
    m out-of-memory or fatal exit information
    o disk out-of-space messages
    p - Terminal properties
    v performance
    x extra debugging information
    + - Add to the existing log file
    ! -Flush each line in the log
    * - Log all information, except the x and v options
    / log
    Equivalent of / l *.
    Update options
    / Update [; Update2.msp]
    Apply updates
    / uninstall [; Update2.msp] / package
    Remove the updates of a product
    Repair options
    /f [p | e | c | m | s | o | d | a | u: v]
    Repairs a product
    p only if the file is missing
    o If the file is missing or an earlier version is installed (by default)
    e If the file is missing or an equal or higher version is installed
    d if the file is missing or a different version is installed
    c If the file is missing or checksum does not match the calculated value
    has all the files to reinstall the forces
    u all (default) user-specific registry entries
    m all requirements (by default) computer-specific registry entries
    s all (default) shortcuts
    v-runs from source and recaches local package
    Setting public properties
    [PROPERTY = PropertyValue]

    Consult the SDK Windows® install to get additional documentation on the
    command line syntax.

    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Independent JPEG Group.

    ---------------------------------------------------

    However if I go in "C:\Windows\System32" and run the msiexec.exe which is where I get:

    "Windows Installer has stopped working".

    And another window that says:

    "The application could not initialize properly (0 x 0000005). Click OK to close the application.

    ----------------------------------------------------

    Edit:

    I went to HKLM/System/CurrentControlSet/Services/msiserver

    By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

    I was able to install only certain programs.

    I was able to install the rescue of the music. But I wasn't able to install iTunes 9.2

    -------------------------------------------------------------------------

    I am running Vista Home Premium:

    Version: 6.0.6002 Service Pack 2 Build 6002

    64 bit

    How can I fix it?

    Haha. Thank you Michael.

    But I have to able to do work properly now. I'll post any major change (that I remember), just in case where someone wants to try what I did.

    ---------------------------------------------

    I deleted everything I could in my temporary files.

    Then I went "HKLM\System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations" and cleared the entries.

    I went to HKLM/System/CurrentControlSet/Services/msiserver

    By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

    Restarted my PC

    HKLM/System/CurrentControlSet/Services/msiserver/ImagePath change back to "%systemroot%system32\msiexec c".

    A run "cmd" and input "msiexec /unreg" then he walked "msiexec/regserver".

    My PC rebooted again

    Profit :D

    Worked for me.

  • HP Installer has stopped working

    I try to install the printer software HP on a Windows 7 Professional 64 bit computer.  When I run the file it complete extraction and then I get the error message ar 'of HP Installer has stopped working ".  I have two options - 1, close the program, or 2. Windows find a solution to the proglem and close the program.  These two close the program.

    There is a solution for this problem?

    It does not show that HP Photosmart C6180 is compatible with Windows 7 32-bit and 64-bit computers.

    The drivers come from HP to make them compatible with Windows 7 computer. I would check the HP website to see if you have the latest driver of game for your version of the Photosmart printer.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1153494&LC=en&cc=us&DLC=en&lang=en&cc=us

    If this does not help, you can ask your question on the community site of HP. http://h30434.www3.HP.com/T5/printer-all-in-one-install-and/BD-p/install

    Thank you

    Marilyn

  • I bought acrobat 9 pro. It has stopped working, and I don't have the license number or serial number. How can I fix it?

    I bought acrobat 9 pro. It has stopped working, and I don't have the license number or serial number. How can I fix it?

    Hi Max,.

    Please visit the following link to get your serial number.

    https://helpx.Adobe.com/x-productkb/global/find-serial-number.html

    Concerning

    Sukrit diallo

  • Adobe first Pro CC2014 20141 has stopped working

    Capture.PNGWhenever I try to launch the program this message 'Adobe Premiere Pro CC 20141 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is not available"I tried to uninstall and re install the program like 2 or 3 times already, can't find anything on the Internet can help me either. Please if you have any suggestions made me know.

    Here is a screenshot.

    Hello

    Can you please check if you have Service Pack 1 installed for Windows or not. My guess is that it is the first cause of crash.

    Concerning

    Dorin

  • P50 win 10 Pro - footprints digital has stopped working

    Hi all

    I just got my P50 (20EQS00600, M1000M, i7-6700HQ, 16 GB of RAM, 512 GB SSD) about a week ago and I quite like it. However, there is one thing that drives me crazy: after that I upgraded to Win 7 Pro 64 bit for win 10 Pro, the fingerprint feature has stopped working. This issue seems to be related to those reported in these two threads for the P70, but at the same time appears sufficiently different to warrant a new post:

    https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/P70-fingerprint-software-issue/m-p/22517...

    https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/fingerprint-and-sound-problems-P70/TD-p/...

    So, here is what I did:

    (1) I correctly installed Win 10 w/o retaining data/settings from the previous installation of Windows 7; I even reformatted the SSD drive.

    (2) for the initial installation, was asked by Windows Hello register prints I've done.

    (3) fingerprint worked during the first connection, but then disappeared as if by magic. Hello Windows is no longer appears as a connection option in the control panel of Win.

    (4) I found in Device Manager the Synaptics WBDI reported the following problem: "this device cannot start. (Code 10) ".

    (5) repeated uninstall and reinstall drivers are without success. I tried both have Win a driver and manual to install the drivers I downloaded from Lenovo page.

    (6) when I uninstalled the drivers and then wiped the fingerprints stored in the BIOS, I was again able to register fingerprints with Windows Hello. However, this time the fingerprints were not yet registered in Windows, and I had to cancel the procedure. Immediately after, the Synaptics driver stopped working, cf. 4).

    I am at a loss what to do. Strange thing is that I ran Win 7 for about a week, and the fingerprint reader worked fine all the time. (Due to the scaling of the questions on my 4 k screen, I bit the bullet and went to win 10, in case you're wondering.)

    So everyone out there has the same problem, does anyone have a solution?

    Thank you in advance and the best,

    A


  • Satellite Pro A300 - 2C5 has stopped working

    Hello

    I have a problem with my Toshiba Pro A300 - 2C5.
    It stopped working today.

    I have paid a top tea but removed is as fast as possible but a little water got inside my laptop.
    He worked for a while, I turned off and it works again an hour later, but unfortunately it has stopped working.

    When I try to turn it on, the syptoms are as follows:
    -the only light that shines is a power indicator light
    -l' screen does not work at all (it stays black and went offshore)
    -fan works
    -It seems hard disk does not work if Windows does not start
    -the keyboard does not work, when I hit tke keys nothing happenes, I tested the Caps Lock key, but not flashing
    -computer does not read my camera memory card

    What shoul I do to get it working again? :(
    Any help appreciated.

    K.

    Hello

    The anomaly can be related to different laptop parts in the worst case the liquid spill damage the motherboard and you will need to replace the part.
    In the best cases, it could be a RAM error as it happens to one of my friends.
    He spilled coke on the keyboard and after awhile the laptop could not turn on.
    We checked memory sharp and replaced both modules with new RAM modules and this fixed the problem

    You can try this also maybe it helps if all other parts should be checked by a technician of the ASP.

  • Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

    On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

    When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

    Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

    Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

    Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

    Hi AndrewInNZ,

    Thanks for visiting the site of the community of Microsoft Windows!
     
    I would like to ask you some questions for a better understanding of the issue:
     
    (a) did you try to temporarily disable the security software and check if updates are smooth?
     
    (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
    It is usually caused by a 3rd party firewall that it blocks the internal ports.
     
    Check out WERCON for more information-
     
    1) Click START | wercon.exe type in the search box start and click on enter.
     
    (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
     
    Also reset the Firewall setting:
     
    1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

    Check the status of the service as well:

    Log in as administrator-

    Start button | Control Panel | System and Maintenance | Administration tools

    Double-click on Services

    (Provide the administrator password or a confirmation if prompted to do so.)

    Right click on the 'Windows Modules Installer' service, and then select Properties.

    Select the general tab - make sure that the startup type is manual

    Here is the link to solve problems connecting to Windows Update or Microsoft Update
    : http://support.microsoft.com/kb/818018/en-us

    If you want to check the version of the service pack of the operating system:
     
    Right-click on computer and select Properties.

    Hope this information helped!

    Thank you, and in what concerns:
    Aziz Nadeem - Microsoft technical support.
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • TSP Installer has stopped working

    During the system startup, I get an error message ' TSP INSTALLER FOR WINDOWS HAS STOPPED WORKING '. Please could someone help me get rid of this

    Hello

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
    The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
    a small box in the lower-left - show for all users can check only).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
    they loaded and much more. This exceptionally effective utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to startup automatically when your system boots and you
    opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
    start the settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
    starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
    The command - line String, product name, file Version, company name, location in the registry or the file system,
    and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • 8600 Officejet pro 911: scan has stopped working

    My scan just stopped working and givee me a message, the printer is not connected to the computer.

    I turned off the computer and the cable and the printer turned on again but did not help.

    Instructions say click the HP and select the scanner action. But when I click on the hp icon I get only an option to install a new printer. Nothing else.

    How do I get this reconnected?

    Hello @skybyrd53,

    Welcome to the Forums of HP Support!

    I would like to work with you today with the resolution of the problem of scan that you encounter when you try to scan from your HP Officejet Pro 8600 e-all-in-one printer to your computer Windows 8.1. I understand that when you click on the HP printer Assistant icon you get a screen "install". This indicates that your software is here and ready to work, but your printer is no longer bound to this software. For this reason, I will guide you through the steps for reinstalling your device to fix software problems and the pilot. Please follow the steps below.

    Step 1: Uninstall the drivers:

    For the purposes of troubleshooting, it is important that we have a clean slate to work with. So, I'll you delete everything Officejet software and drivers on your computer.

    1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
    2. When the splash screen opens, type programs and features. Click on programs and features to open it.
    3. When the programs and features opens a list of the programs installed on your computer will populate. Scroll down the list until your see HP Officejet 8600. Select the HP Officejet device and click Uninstall
    4. Follow the instructions on the screen to complete the uninstallation of your product.

    Once the Officejet has been uninstalled successfully, please proceed to the next step.

    Step 2: Remove temporary files:

    1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
    2. When the splash screen opens, type run. Click on Run to launch the run dialogue box.
    3. In the run box, type %temp% , and then click OK
    4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
    5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
    6. Close the Temp folder when it is empty
    7. Right-click the recycling bin on your desktop and select empty recycling bin

    Step 3: Reinstall the drivers:

    1. Please click here to download the latest drivers for your HP Officejet
    2. Once the site opens, please click on the download button at the top left
    3. If you are prompted, please allow the download to run
    4. Once the download is complete, please follow the instructions on the screen to reinstall your printer.

    Once your printer is reinstalled successfully, please try scanning and printing to confirm that everything is working properly again. If your printer is unable to install because it is not 'detected' when installing, please let me know how your HP Officejet is connected to your Windows computer (USB, Ethernet cable or wireless).

    Please reply to this message with the result of your troubleshooting. Good luck!

  • Satellite Pro 6100: fan has stopped working

    I recently decided to copy out all my data from my laptop and it just stopped. It was very very hot, and the hard drive has not worked since. I put a new disc in and installed the software but it heats up really fast. My question is this all a result of the fan (I can't hear more) stop and is it possible to buy a fan and install it myself - I've already cracked it open and got down to the fan and it looks like dust-free. I am pretty handy and want to do it myself.

    If the fan is originally where can I buy a replacement?

    Hello

    This looks like a laptop computer could overheat.
    If you can't hear the fan or cooling module is bad or there is something wrong with the motherboard.

    In my opinion, the cooling module must be checked and possibly replaced.
    All parts and devices can be controlled from the maintainer authorized Toshiba in your country.

    Just call the guys and order the compatible part or if you have no experience, ask the guy to help him. I think that you should not replace anything by yourself. It may be damaged anything else. The technicians have more experience and can locate and solve the problem much faster.

    Good luck

Maybe you are looking for