HP LaserJet P1006 does not print

From my HP LaserJet P1006 to connect to my wireless router's USB port. When I tried to print my computer went on the Net to download the printer driver. I tried to print again. I have received the print dialog box, choose the printer that was connected to my wireless router and clicked the button 'print '. HP printer app starts and indicates that the page has been completed but the printer just sitting there with no output and no error message on the computer either. The printer works fine when I print from my MacBok Air. What Miss me?

1 HP LaserJet P1006

2. Mac OS x 10.5.8

3. no error message

4 just installed printer

What brand and model is the router?

It sounds like the issue is isolated on a Mac system because it runs from the other.

Reset the Mac printing system exactly as described in this document from Apple.

Then, install the HPstar driver.  This package includes support for OS X 10.5.

This should reset the printing system and remove any software that may be cause of conflict.

Tags: HP Printers

Similar Questions

  • HP laserjet p1006: does not print after changing the toner

    I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

    Hi @cindycb,

    Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Make sure all the orange, packaging material is to remove the toner.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

    Open and close the cover five times quickly. It should print a page with black lines on it.

    You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

    You use Genuine HP Toner?

    Please let me know the result and if there is anything else I can help you. Thank you.

  • LaserJet P1606dn: does not print the background of the page number of manual

    I use the HP Laserjet P1606dn printer.  I am trying to print the user's Guide the HP for a new printer HP Officejet Pro 8620.     The manual is in PDF format.   When you view a page of the manual on the computer screen, the page number appears at the bottom of the screen.  Unfortunately, when printing the printer manual HP Laserjet P1606dn, the page number is not printing.  I tried to use the SHRINK TO FIT to the Laserjet function, but that does not print the page number.

    Any advice on how to print the page number would be welcome.   Aaron

    Thank YOU FOR YOUR QUICK RESPONSE!   PROBLEM HAS BEEN RESOLVED.  I TRIED TO PRINT THE GUIDE THE USER DIRECTLY FROM THE WEB SITE THAT DID PRINT NOT PAGE NUMBER.    I DOWNLOADED THE MANUAL IN THE MEMORY OF THE COMPUTER AND THEN PRINTED THE GUIDE FROM THE DOWNLOADED FILE.   THE PAGE NUMBER DID PRINT WHEN YOU PRINT FROM THE DOWNLOADED FILE.    WHY IT WORKED, I DON'T KNOW, BUT CELA WORKED.

    THANKS AGAIN FOR YOUR KIND INPUT1 BEST, AARON

  • HP Color Laserjet CP2025 does not print the colors in the document

    Original title: print film

    I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

    Hi DirkjeAbma,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3 color printing fails all printing applications?

    You can see the following HP support article and check if it helps to solve the problem:

    HP Color LaserJet CP2020 printer - image quality problems

    You can also read the following article and check:

    How can I check my ink or toner levels?

    Hope this information is useful.

  • HP Laserjet 1200 does not print in Windows 7

    I have a HP Laserjet 1200 connected via the USB port of a laptop running Windows 7, 64-bit.  I installed the driver 64-bit windows 7 to the printer through the Windows Update process.  I added it as a local printer as described in this thread.  The driver installs and seems fine.  (The icon of the printer under "Devices and printers" is another printer, but I don't know which is relevant).  When I try to print a test page or any other page, work flashes in the queue of the printer window and disappears quickly, but the page does not print.  I get no error message.  Any suggestions?

    Hello

    I suggest you go through the following link.

    Printer in Windows problems.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    You can also try downloading the driver from the manufacturer's website, install on your computer.

    You can download the driver from the following link.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=29790&prodTypeId=18972&prodSeriesId=29789&swLang=8&TaskID=135&swEnvOID=4063

    You can also refer to:

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  • HP Laserjet 1010 does not print

    After you have reinstalled Windows Vista 32-bit and printer HP Laserjet 1010 and update the printer driver does not work.  There is nothing wrong with the printer (everything is checked with the program Microsoft Fix It).  When I click on and open the printer it shows that there is an error.

    Have you installed the printer according to the instructions from HP, who usually does to install the HP software * before * the printer connection, and you used the latest version of the software / drivers from the HP site, or did you just plug?

    And if you have installed the HP drivers / software there is a HP utility test, theres also the option to print a test page through printer Btns

  • HP LaserJet 5550 does not print A3

    I rMBP (Maverics 10.9.5) and network HP LaserJet 5550 (pilot 19.8). After the last Update my priter won't print A3.

    I reinstall the printer drivers. I reconnect my printer, but it does not solve my problem.

    How to set up the paper of trey?

    I solve my problem after update Photoshop

  • HP LaserJet p1006 is not printing with windows 8

    I have a HP Laserjet P1006 and recently installed Windows 8 on my computer. I downloaded the drivers for windows 7 and down them in a mode of compatibility with the installed printer. The problem is that, although it is said that it is printing something, nothing happens. The computer says that it has communicated information about ot the printer, but the printer is not printing. I ran the torubleshooter and it says that the printer must be connected to a USB 2.0 port. Not only my USB 3.0 is backward compatible (I checked), I have even a hub USB2.0 connected to the printer. There is no error message, depending on the computer, all right: but the printer is not printing. Help please?

    You should probably wait until the official drivers are released. The driver page I found for LaserJet compatibility with Windows 8 said that he should be released "Spring 2013", so it should be available soon.

  • HP Laserjet CM1415fnw does not print wireless

    Original title: HP Laserjet CM1415fnw

    My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

    Hey Kevin,

    What version of the windows operating system is installed on your computer?

    Refer to the steps in the following article and check if it helps.

    HP Print and Scan Doctor

    Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

    Printer in Windows problems

    Keep us updated on the status of the issue.

  • Color LaserJet 2605 does not print

    My ColorLaserJet 2605 was printing very well - I finished work, then fed the following work and therefore, everything he says "print document" with the green light flashing - but nothing ever prints! I rebooted, reinstalled, nothing changes - it lights, initializes, said it's "Ready", and then when I try to print a 1 page, simple text without color or photos document, I get the same situation of non-printing - saying the document print, but nothing prints ever. Any suggestions? Thanks in advance! Aggie 55

    First, go to the reports menu on the printer and see if you can print a configuration page. If it works, check your driver. If this does not work, then you can be problems to trainer.

  • HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

    Hello

    Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

    It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

    Any suggestions?

    Thank you!

    Hi, thanks to send additional information.  It really helped.

    The following is taken from the User Guide which can be found here:

    http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

    The message that users see is a Media fast charge.

    On Page 198, there is a section on the message they see.  It also includes measures to address the message.

    It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

    For step 2 to verify the media guides see page 97: "setting up trays of food.

    When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

    You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

    Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

    What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

    Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

    (Edited to remove extra lines)

  • Given that I've upgraded to Windows 10 my laserjet p2055dn does not print

    I upgraded my 2 computers to 10 Windows over the weekend and since I can't print to one of my printers from my desktop but my laptop is printing OK.  I tried to uninstall and reinstall the printers.  When I install they appear on my network, but when I try to print I get a message that says: it can not print with the current configuration.

    When I try to print a PDF document, I get the error message that "no pages are selected for print.

    Finally, I uninstalled all HP software then reinstalled both of my printers and everything works.

  • LaserJet 2300d: Laserjet 2300d does not print double-sided with Windows10

    My excellent laserjet 2300d worked many years.

    Since the upgrade to Windows 10, he claims that duplex printing is not supported. Maybe it's a coincidence, but how to restore duplex printing?

    Hello
    Make sure that the automatic duplex printing option is selected:

    Enter the control panel > devices and printers.
    Right-click the printer icon, and then click printer properties.
    Click the device settings tab.
    As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

    Automatic duplex printing should now available.

    Kind regards
    Shlomi

  • LaserJet 4 does not print via USB

    I have a Laserjet 4V that I recently bought a USB cable so I could connect to my HP M9252p under Vista 64-bit Home Premium computer. When I plugged the cable U he said it had detected new hardware and install. However, he didn't add the printer to the printer list. Then manually, I have added the printer and assigned via local port USB001. When I went to print test page it says it was sent to the printer, but neither made an impression or even appear in the queue. I checked the pilot site and it says that the driver is under Vista so I am current. Just to be safe, I disconnected and connected to my laptop HP 6910P XP and he acknowledged and I could start printing immediately. Would like to print from my desktop machine.

    Tuesday, June 15, 2010 19:39:56 + 0000, jbarrac1 wrote:
     
    > I have a Laserjet 4V, I recently bought a USB cable so I could connect to my HP M9252p under Vista 64-bit Home Premium computer. When I plugged the cable U he said it had detected new hardware and install. However, he didn't add the printer to the printer list. Then manually, I have added the printer and assigned via local port USB001. When I went to print test page it says it was sent to the printer, but neither made an impression or even appear in the queue. I checked the pilot site and it says that the driver is under Vista so I am current.
     
     
    It may be under Vista, but you did not say that you have installed the
    pilot. Did you?
     
     
    > Just to be safe, I disconnected and connected to my laptop HP 6910P XP and he acknowledged and I could start printing immediately. Would like to print from my desktop machine.
    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
     

    Ken Blake

  • HP LaserJet CP1025nw color: color HP LaserJet CP1025nw does not print

    After a big print job (60 pages), none of the 7 computers at the Office could print, prints remained in the queue.

    Have restarted, all computers, printer, router wi - fi > no joy.

    Printer restored to factory settings, it did print 2 test pages, so we know that the printer can print...

    Impressions from all computers remain in the queue.

    Have you tried "Devices and printers" Troubleshooting > no joy

    All computers print always very well on another HP printer wi - fi office, so we know that's not the router at fault.

    But at the same time, while the printer is working, we cannot print.

    It is disconcerting. Any ideas?

    In hindsight, it seems ridiculous, but the problem has been resolved by activating the function wi - fi printer, which was accidentally turned off and no one bothered to check...

Maybe you are looking for