HP LaserJet P1102w: No Office Depot compatible cartridge

Similar Questions

• LaserJet P1102W will not accept a new black cartridge

  I have a Laserjet P1102W coming out of warranty of 16 days. It won't let me print as it calls for a new black cartridge which I changed to a new one and it still won't let me print. I have tried the factory reset and it still does not work.

  Any suggestions to make it work please.

  Hello

  Remove the toner cartridge from the printer and on the left inside of the printer where the toner cartridge,

  There is a sensor vertical flag that triggers and detects the toner cartridge when its inserted...

  Make sure the sensor is freely switch also check the obstacles inside the area of the cartridge...

  to clean the contacts inside the printer and the toner cartridge...

  even if I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• HP Laserjet P1102W: Poor print job

  I bought a HP Laserjet P1102W, and after printing of less than 500 pages, he started leaving large voids in the pint. I replaced the cartridge but it is printing a gray, not black. It tells me that this is not a problem with the cartridge, but with the machine. I don't know what part needs to be replaced.   An office supply place told me that it would be cheaper to replace the printer.  The printer is a little over a year - I will not have to pay twice.

  Hi @Officework ,

  I see that you have problems when printing you get gaps in the impression. Have you tried a new toner and it's printing in a light gray now.  I would like to help you today.

  If you have not already, remove the toner and gently swing the toner back five times to redistribute the toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Try the following steps to see if it will solve the problem.

  Troubleshooting print quality problems.

  If the status of supplies page prints darker, then it is most likely a setting in the printer driver.

  It may be a problem with the hardware or the merger of the printer, it is not a replaceable part. You would have to

  Call our technical support at the 800-474-6836 to see if they have a job in the options available if you wanted to go that route. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  You use Genuine HP Toner?

  What kind of paper do you use?

  If you need help, let me know.

  Have a great weekend!
  Thank you.

• Problem HP Laserjet P1102w

  Hello

  After several attempts and after installing the new firmware I finally managed to install the Laserjet P1102w on my Mac OS: Lion).

  However, I still face a major problem in wireless printing: the printer stops printing after a while. I installed the printer via Hello, characterized by a unique SSID and a fixed IP, auto power off, set the I/O Timeout maximum. The printer is accessible via the Web interface and prints documents via ePrint mobile printing. Even if the LED lights in a constant blue, the printer firm impression.

  Is there a major bug in the firmware or the printer is not compatible with OS 10.7.2?

  Chris

  I found the solution... never by HP printers if you own a mac!

• HP Laserjet P1102w: HP Laserjet P1102w not recognized in Windows 8.0; driver needed

  Trying to install HP Laserjet P1102w on Dell desktop running Windows 8.0. The installer always stops and says to connect the printer by USB, but it is already connected and turned on. Had to remove peripheral devices after he worked temporarily, but now I can't find the driver - have the disc. How to recognize the driver on disk file?

  Hi @artjourneyer,

  I see that you have problems get printer recognised and you will need to find the file on the CD for the printer. I will definitely do my best to help you.

  The file would be .inf from the CD.

  I would say to download and use the latest drivers for Windows 8. HP LaserJet Full Feature software and driver.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. You may need to try another USB cable.

  Try and print a self-test on the printer hardware to see if it is a hardware problem. If the printer is not in a ready state, the computer does not recognize it. Printing a Configuration Page. Select the method two.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect. Remove the USB cable plugged in, remove the printer from the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  You set up the printer on the wireless network?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP Laserjet P1102W: Windows 10

  My HP Laserjet P1102W printer is compatible with Windows 10?   He is currently connected wireless for Windows 7.

  Hello

  Yes. It has full software and drivers for Windows 10:

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-P1100-Printer-series/4110394/model/4110306

  Kind regards.

• HP LaserJet P1102w & Wireless Mountain Lion

  I just bought a new HP LaserJet P1102w and cannot connect it via radio to my Mac at all. I am running Mac OS 10.8 with the latest software updates. I already downloaded and installed the latest software and firmware directly from the HP site. I can't seem to set up the printer to work on the wireless, although the site HP says that it is taken in charge by Mac OS 10.8.

  When I go to system preferences > print & scan > Options and... office supplies > utility > Open Printer Utility > HTML Config... to try and connect to my WiFi (running on a brand new terminal, Airport Express), all I get is the following:

  This page contains the following errors:

  error on line 6 in column 48: entity 'nbsp' not defined

  error on line 12 in column 8: beginning and ending tag mismatch: connect the line 0 and head

  Here is a rendering of the page up to the first error.

  HP LaserJet Professional 1102wUSB P

  How am I supposed to use this printer wireless? Your site says it is supported, but when I have all the updates of software and firmware on my printer and my computer, it does not work. I'm extremely disappointed in HP right now and I hope you can provide a viable solution.

  Mac OS 10.7 has been out for more than a year-and-a-half and Mac OS 10.8 came out for almost 3 months now. It's ridiculous and disprespectful your customers do not have good drivers and firmware available to ensure that your prodcut works as you say it should.

  I look forward to your solution.

  Hi JustenB84,

  So when you installed the driver that I've shared with you, have you tried configuring wireless via the configuration HTML again utility? Open the queue for the printer (USB), and then click settings. Select the utility, and then open the Laserjet utility. Then click on Config of HTML. The tool now comes so that you can enter the settings of your wireless network?

• CM1415fnw: Real vs compatible cartridges

  Hi people,

  I have a dilemma with this printer. It has been a great unit, I got from my employees when they closed an office. As it is just for consumption, he made only 20 000 pages. The print quality was nice, and we like to have a scanner available, so we were making good use of it.

  As you can imagine, he was running low on toner, so we brought a real set of toners @ $385 only 6 months later, they were weak again.

  We cannot afford to spend $770 per year on toner, so we opted for the cartridges "compatiable". 2 months later, the colors seem bad to align and erase each other.

  So we called a center of service that said they don't look if we have non-genuine cartridges in it.

  So, we either throw the printer and buy something else, or find us a way to use cheaper and maintenance cartridges it.

  The compatible cartridges are really so bad? If so, why people still sell? and everyone claims the warranty on them?

  HP printers can actually detects if your cartrdige/filled aid of counterfeiting. It may work sometimes, but must be changed whenever the printer detects fake and of course, conterfeits is the main cause of the printers print mechanism.

• LaserJet P1102w: two side printing on Laserjet P1102w

  Hello

  I can't print on both sides for Laserjet P1102w with my Mac, I followed all instruction on HP user manual on page 23, on the '7' clause, I have to click on continue, but it is not a "continuous" option at the request of the printer or the product. And after printing half a million pages, the application works. Please help me.
  Thank you

  Hello

  Once the 1st page printed and reloaded in the status bar, open and close the top page cartridge access door to resume printing and print the 2nd side.

  Shlomi

• HP jet p1102w laser: printing on hp laserjet p1102w error

  When I come back to print from my iPhone and iPad the printer says error could bot print I have tried reseting cartridge changing power rest but he didn't he had printed one page and display the error message please help

  Hi MohamedAlaa,

  After that you went through the second step: print a Self Test / Configuration Page of the device. When she printed it showed an IP address? He mentioned that if something is not on the sheet?

  In the meantime, please see this post, iPhone & iPad can't Airprint for LaserJet p1102w, by @VisionAiry. To make sure the firmware on the printer is up-to-date.

  Once done, go through this guide once again, setting up the printer on a wireless network for the HP LaserJet Pro P1102w printer. To reconnect to the network. You have to turn on all devices again later and check that they are all on the same network!

  Hope this works for you and have a nice day!

• HP Jet P1102w Laser: cannot install HP Laserjet P1102w correctly (USB detects no not my printer)

  Dear Sir.

  Recently I bought a new HP Laserjet P1102w, my printer is on and also attached with USB, but when I go to install the Geniune CD with bundled software, the error came and procedure do not fill correctly, what should I do? I want to use it with wireless printing, but how can I install it correctly? Printer showing also the number real name and model on PC... What is c?

  

  Hi @NaveedShaikh,

  I see by your post that the printer is not detected. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Thanks for providing the excellent screenshots. The CD is used for different models, the P1100 is your printer series.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer.

  This can also occur when the printer is already recognized as the USB connection and windows does not yet detect.

  Remove the USB cable plugged in, remove the printer in the devices and printers (if the list) and the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that the connections in Device Manager for the entries of the printer, under Bus USB controllers are looking for USB, Mass Storage Device print media or anything with a yellow exclamation point or an unknown device. Right click and uninstall the device. Then reconnect the USB cable and it must be detectable again.

  If you're still having problems, unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation.

  If there is anything else I can help you, let me know. Thank you.

• How long is standard, the warranty of the manufacturer on the new printer, Laserjet P1102w?

  I just bought a HP LaserJet P1102w (in the United States). It works well, but I wonder how long the guarantee becomes? 30 days? 90?  A year?

  Just so I don't know how long to keep the receipt.

  
  HP LaserJet p1102w

  Hello

  This printer is guaranteed 1 year.

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-LaserJet/CE658A?HP-LaserJet-Pro-P1102w-printer

• HP LaserJet P1102w: button 'ok '.

  Where is the button 'ok' th on the HP LaserJet P1102w printer?

  Hello

  When you receive this message, try opening and high page cartridge access door closed, it is the function of recovery for the printer and check if this can help you

• Cannot turn off Double-sided printing on LaserJet P1102w!

  So I just installed this LaserJet P1102w and I absolutely cannot understand how to disable two-sided printing. It's really annoying because even when I try to print only a one page document he sucks a blank page, does not print anything on it and then told me to return the document to print the other side of this one. Sometimes it prints also a Hewlett-Packard test page or something that wastes the toner. I have gone through with a fine tooth comb printing preferences and cannot find a way to turn it off. There is nothing in the user guide on how to disable it. Scan doctor said there is nothing wrong with the printer. I tried to download some sort of aid to this site and is not compatible with this operating system I guess. I've lost hours trying to figure this out and there is no way to call and speak to a human, I guess. I want it out. Can someone please help me and tell me how to disable? It's wasting toner, my time and it's extremely frustrating. Thanks in advance for any help.

  Check that the Mode of Duplex in device settings setting in properties P1102w is OFF.

• HP LaserJet P1102w: Windows 8.1 - run two different USB connected P1102w printers with simple shortcut on the desktop?

  I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.

  When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon.  The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.

  Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?

  Thanks for any help or advice!

  Dave Waters

  Hey @dmwaters138,

  Welcome to the Forums of HP Support!

  I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.

  Step 1: Remove the drivers:

  It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type devices and printers. Click on devices and printers
  3. In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
  4. Then, on the Start screen type programs and features. Click on programs and features to launch the window
  5. Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install devices:

  1. Please leave unplugged USB cables

  2. Please click here to download the package full feature software and driver for the HP Laserjet Printer

  3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.

  

  4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.

  5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties

  

  6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.

  

  7. close devices and printers

  8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.

  9. in the run box type %temp% , and then click OK. The Temp folder is now open

  10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.

  

  11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.

  

  12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.

  13. in the start screen, type devices and printers. Click on devices and printers to open the window.

  14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.

  

  15. close devices and printers

  When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.

  

  I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.

  Please let me know if the steps I have provided to resolve your problem. Good luck!