HP LaserJet P1102w: Printer HP LaserJet P1102w - this connectable to run via a USB cable and wireless?
Can use the installation disc delivered with the printer and choose to run it using a USB cable or must it be used as a network printer?
There is no Ethernet connection.
The QuickStart Guide illustrates wireless / usb Configuration.
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
Tags: HP Printers
The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list
I have two printers installed on my laptop, only appears. The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something. When I select "Find a printer", it gives me a list of computer icons.
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.
Good luck, you need to update or reinstall the latest driver.
Epson - Support us.
Epson - support from Europe
The main issue is probably the drivers, but these can help:
Add or remove a printer
Solve printer problems
Open the printer Troubleshooter
Find the manufacturer's Web site
Find and install printer drivers in Windows 7
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.
When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon. The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.
Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?
Thanks for any help or advice!
Welcome to the Forums of HP Support!
I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.
Step 1: Remove the drivers:
It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.
- Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
- In the start screen, type devices and printers. Click on devices and printers
- In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
- Then, on the Start screen type programs and features. Click on programs and features to launch the window
- Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.
Step 2: Remove temporary files:
- Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
- In the start screen, type run. Click on Run to launch the run dialogue box
- In the run box, type %temp% , and then click OK
- When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
- Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
- Close the Temp folder when it is empty
- Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.
Step 3: Install devices:
1. Please leave unplugged USB cables
2. Please click here to download the package full feature software and driver for the HP Laserjet Printer
3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.
4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.
5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties
6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.
7. close devices and printers
8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.
9. in the run box type %temp% , and then click OK. The Temp folder is now open
10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.
11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.
12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.
13. in the start screen, type devices and printers. Click on devices and printers to open the window.
14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.
15. close devices and printers
When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.
I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.
Please let me know if the steps I have provided to resolve your problem. Good luck!
I tried to do what I thought, it was a systematic HP software update on my printer, which has been very well. The software appears to install correctly, but then I could not connect wireless or even when I plugged a USB cable at the back. I restarted my computer and my printer several times. I retried the installation several time steps. Two hours later, I'm stuck, and I see no way to get any help from HP. At this point, I think seriously just junking my printer and switch to another brand that has his act together. Can anyone help? Of course can't do HP.
Normally, I will not let any product for my machines automatically update. Anyway, my suggestion: using Windows restore to restore the machine back to the point before the update.
I hope this helps.
Experts! Help, please! HP support by phone could not find a solution.
I bought a new Photosmart Plus B210 last month. I am a moderately advanced computer user and have not been able to print a picture of this printer, EXCEPT when printing directly from a card inserted into the machine.
I installed the printer on two laptops, one running Vista, the other running Windows 7.
The problem persists if printing wireless or USB.
The printer works perfectly as this major problem.
Thanks in advance for your help. If I can't make this work, I'll have to return this printer and will likely purchase another brand.
First of all, in vista - please turn off the printer, restart your pc and to clean the print queue and turn on the printer.
Now, make sure you select the exect for the tray paper size, that the same for the type of paper and size when printing... now see if there is a difference.
What about win7 - what do you want to see exectly? the option is grayed out? You may see other options to select related to it?
Yes, you can connect your printer wirelessly to the top and the USB. If you have 1 computer connected to the USB printer, you can also download the software and drivers for computer #2 and wireless connection.
On the printer, you will need to put it on the network (router).
If you need assistance, please be sure to ask. You can connect several computers to the wireless printer, but could only be plugged into the USB cable.
Hope this helps everyone.
Need to install HP OfficeJet G85xi to computer portable 64-bit windows 7 and need the proper drivers and printer parallel to a usb cable for laptop.
Hi, you can try the StarTech ICUSB1284 adapter. ($20)
If you get to install the drivers come with Windows 7.
A seriously paralyzed malware on my laptop Dell Inspiron 1318 running Windows XP Professional SP3 with 3 GB of memory. Some key files have been deleted, and I can't open all .lnk files. After some research, my solution was to start from a clean format. However, I have some programs on the old system that I really need and impossible to reinstall on a new system. So, I chose to install a new WinXP as a dual boot on a separate partition (I have also a third partition that I use for user files); keep the old system for when I really need.
After installing the new WinXP, the detector material caused my LaserJet P1102W printer install pop up box. I was busy to install other drivers at the time so I canceled the installation of the printer later. When I came back to him, he went for the bulk of the fine saves but then abruptly stopped, saying: "the printer installation failed. On the HP site, I went through all the HP printer Diagnostics steps without good results.
I really want to get this printer working on my new system. What can I do?
No problem. Since you are the author of the post, you should see a black button with "Accept as Solution" next to the reply button. If you don't see it, make sure that you are connected and try again. If still can't get it, you can click the link inappropriate content report and ask the moderators to mark the solution for you. Hope that helps.
I have a HP c309g printer that is connected to a Dell Inspiron computer. I recently bought a HP laptop. Is it possible that I can access the printer time Wired for the Dell wireless laptop? Thanks for your help.
Well Yes, connect to your wireless network. From the front of the printer: Setup > network > network Wirleess assistant.
Now that it is connected to your network, run the HP software on each computer, choose the type of installation 'Network' when asked.
I have a PC running Windows XP Pro, which acts as the home network file and print server. The Photosmart 7960 is connected to this computer via a USB cable and configured to be "shared". When I go to "Add a printer" on another PC, in Windows 7, which is also part of the same network, I can navigate to the 7960 correct, but the installation wizard is unable to find the driver for Win 7. I still have what in the HP see basic documents that tells me how to add this shared printer on my Win 7 PC. Looking at the support page drivers I saw that Windows 7 already has the driver. True, but the only way, it seems that I can get to it is to connect the printer directly to Win 7 PC via a USB cable. Any suggestions?
Apparently, the solution is as follows. First connect the photosmart 7960 directly to the PC running Windows 7 via USB cable network. It will be auto-install drivers. Reconnect the printer to the PC under XP pro server. From the PC running Windows 7 where you have installed the printer via USB, you can go ahead and remove the photosmart 7960 from the list of printers; This will not remove the just downloaded drivers. Next, select Add a printer, and then select 'Add a local printer' (no network). Select 'Create New Port' and click Next. In the next dialog box, type the name of the host server and the name of the printer. In my case, it's \\mainserver\HP photosmart 7960. Click Next. In the "Install the printer driver" dialog, click "Hewlett Packard" and find the 7960 in the printer list and click Next. I was able to successfully install the printer this way.
My laptop is Windows Xp edition sp2 family.
My old HP laptop computer of 4 years has 4 USB ports. Unfortunately, 3 of the 4 ports broke physically, so I only have a single functional port.
A port that works cost of my cell. So I know it works. But now, only 40% of the time it will print when I plug my 750 HP printer all in one in it.
Otherwise, it will display a "?" on the printer in the taskbar icon. Once, I unplugged the USB cable and plugged into the broken USB port holding it still and it actually print my papers. But as I said I have been lucky that day cause these 3 ports are broken.
What can I do to make the only port 1 have, can work for all devices I. It seems not only act with the printer.
In addition, supplants ports broken something painful, costly or difficult to do? I know it can vary depending on the brand of the phone... But overall, it might be an easy solution?
Thank you all in advance...HelloMethod 1.Let us run the fixIt in the article below and check.Let us, remove and reinstall the usb controllers and check.To remove and reinstall all USB controllers, follow these steps:
a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
b. click on the Hardware tab.
c. click the Device Manager button.
d. expand Bus USB controllers.
e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
f. restart the computer and reinstall the USB controllers.
g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.Reference:Advanced troubleshooting tips for General USB problems in Windows XP
http://support.Microsoft.com/kb/310575You can also download and install the dricers from the link below.
It is an alternative to repair broken ports, you can purchase a usb hub, you can insert it in the usb port that works, and then use the available ports on the hub. Find out the nearest computer to usb hub store.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Hello! We have Toshiba e studio 206 which is installed with the usb cable.
Official drivers for e-studio 206 granted official website (here and later - a Russian) had been installed without error, the device shows any errors as well and can be used as a copier or even scan via the usb cable.
But when I try to print at least a test page - an error in the spooler window.
Install the drivers, the printer as a COM-device. I read on the official website that this is normal.
If Windows 7 (32 bit) - in the window 'Printers and devices' there is the printer itself AND a strange unknown device called TOSHIBA e Studio 206 (COM3).
On Windows XP, it is all of the same except there is not that strange device.
I'm sorry if I posted in the wrong forum, but given that this thing is a copier at the top (or so I think...) ...
P.S:I tried using different USB cable - no effect. I guess, I'll try another while you wait for your kind answerrs... Thank you!
Have you installed other printers or drivers next to Toshiba e-studio? If Yes please try to remove them and test it again.
In addition, I would recommend to reinstall the drivers for the e-studio again. Delete the current version and restart the computer. Then install the latest version you can find on the page of Toshiba.
We recently purchased a printer all-in-one PhotoSmart HP 7525. I created the printer via a USB cable to a single computer (the main desktop computer). The printer works perfectly in this way.
We also have a wireless network and other devices on the network to use the HP printer. However, the main desktop computer doesn't have wireless connectivity, it's why I connected the printer with a USB cable. I don't want to replace Wireless USB connectivity. I want to add wireless capabilities, so we have two options available (USB only for the desktop, wireless for iPhones, ipads and other computers on the wireless local area network). Furthermore, I realize that we need to install the printer drivers on any PC without wire that we want to have access to the PhotoSmart printer.
What I want to do is to leave the main computer set up exactly as it is (USB connection). I want to put the printer on the wireless network without disturbing this set-up. What is the best way to add this printer to our network on the main computer wireless capability wireless?
Thanks a lot for your help.
In fact for the specific printer you can do it from the Panel as well.Follow these steps to connect the printer to the new network by using the Wireless Setup Wizard.
Help on the printer screen says: no connection to the computer, but is connected via a USB cable. Also prints OK, but the HP solutions Center says: ink levels not currently available; iable.
Please let me know if the Solution Center works after doing the above.
Maybe you are looking for
Hello I have a question about Satellite A300-17N. Is it normal to power by touching the button Media Player? Because I can turn it on by pressing the power button (which is normal) or pressing the button on the media player. Thank you in advance, AEM
HelloI have a hp Pavilion dv6-3131tx with switchable graphics (HD Intel and AMD Mobility Radeon HD 5000 series card graphics card), and after the upgrade to Windows 10 all my games have been slow. I thought it was because of the HARD drive space I di
Suddenly, I get this error when I try to run my program. I looked at the page for orientation: http://digital.NI.com/public.nsf/allkb/485201B647950BF886257537006CEB89 I followed the steps for the case 1 (traditional DAQ driver reset), but I still get
My windows xp cd is badly scratched, is their anyway I can get a replacement drive
When I look at my nails of the thumb of the photos files do not preview the images, just a generic image. Can I change this? It is difficult to fix / search for photos, etc. Its probably something very simple, I'm not sure. Just had my hard drive rep