HP Laserjet P2015d: HP P2015d duplex printing blank first page

Hello everyone

I have in my office, among other things, the printers two HP Laserjet 2015b. We use it on Windows XP, 7 and 10. Whenever I put them for the first time, I have the same problem with the drivers.

From XP and ending with 10, there are 3 packs of drivers, PCL5, PCL6 and Psalm none of them installs ok, printers work, but there is a problem in duplex printing, gives me a headache. I try to only print only one page (for example: 1 page, current page, etc.), printers print on both sides of the paper, first white and the text on the second.

In XP and 7 that I managed to solve the problem in a very strange way, install a software package and manually change the driver with that of another pack! For example, I installed PCL 6 and I changed in the printer properties Advanced pilot, the PCL 5 driver. And that after many attempts to find the best combination!

Now, I have improved my work to 10 Windows 32 bit laptop and I can not solve the problem either. Any driver, I choose the 3 special indeed for Windows 10 or fom those made for 7 or XP, try to only print that one page in duplex, the printer prints on both sides of the sheet of paper, white on the first and on the second text! And I find no option in the settings of the printer to solve this problem.

Can someone help me with this problem?

Thank you

Thank you all for the advice and opinions. I did it!

After many, many attempts, I noticed a small option "allow manual duplex", which was enabled by default, and which appeared in print (MS Word and other programms) main window only when selected duplex! Strange! I disabled it in the Advanced tab of the printer properties and everything is normal now!

Now I can use the printer again only in "duplex" mode, and it prints a page "simplex" and the two following pages "duplex", because it suppose to do!

Tags: HP Printers

Similar Questions

  • Printer printing blank first page

    I have a HP Officejet 4500 G510g-m and I have Windows 7 Home Premium.

    All of a sudden yesterday, when I print a document my printer spits out 1 blank page, then proceedes to print the entire document.  I went through 'Customize your printer' and 'The printer settings' to see where I can stop this but I saw that there was no indication a first first, blank page.

    I'm sure it's something easy to fix, I just wish I could find it.

    Thanks for your help.

    Clare Horvath

    After reading one similar problem with another printer, I tried to find out if I had a "separator" under Properties page and I did not.

    So I downloaded the HP printer & Scan doctor and after going through here, my printer print is no longer a first blank page.

    Thank you guys.

  • New Windows 7 pro machine always prints the first page in a direction, but all other pages are printed in a different orientation

    We bought a new PC for one of our employees that is running Windows 7 Pro 64 bit. We have several printers throughout our office area. There are three printers that this person will print to the two Ricoh printstations and a Brother Laser printer. Any printer that employee uses printers still print the first page, a focus on the next page and all other pages in the other direction. The first page is always printed in the opposite direction of whatever orientation has been selected.

    If it has a four page document and select landscape as the orientation, the first page prints in portrait orientation while the other three pages will be printed in landscape. She can go back and print the document again and all four pages will be printed in the right direction. This happens no matter which printer she uses, as well as any program (Word 2010, Excel, Adobe, web pages, etc...). Any suggestions?

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    Hope this information helps.

  • HP laserjet 1020 how disable duplex printing

    I've updated mny Laserjet 1020 driver on Windows 7 and now the printer default to double-sided printing, but I don't want this option turned on. I can't find any property where I can disable this default value.

    Glad to see that you have solved the problem. Just to make this clear solution for everyone... I have attached a screenshot and the directions below on how to cut manual duplex printing...

    Go to your printer icon. Click Printing Preferences. Click on the finish tab and make sure that:

    1. to print on both sides (manually) = checked. You can get a pop up with each print job after that, so beware

    2. NOT to print on both sides (manually) = unchecked.

    Additionally, make sure that when you print a document that your game your appropriate printing preferences by clicking on Print Properties (from the application you are printing from) and then making sure the impression on both sides is clicked or says no

  • Indesign CS5 - Duplex print booklet, two pages are missing.

    I hope someone can help! I am trying to print a 24-page booklet using 2 - up perfect bound with the signature value 4. In the preview in InDesign and when I printed out to test the two first pages are missing. It seems at least one of the pages is actually a page on too, but it's difficult to work on the preview. Please help due tomorrow afternoon!

    If you have some blank pages in your file, you must set the printing by print booklet dialog box to print blank pages.

  • HP LaserJet 200 color M251: HP LaserJet 200 color M251 only prints completely black pages

    While in the middle of printing a 24 page document, printed pages went from perfectly readable to completely black (black Coal Mine).  The cartridge is only around the age of 2 months and a lot of toner.   I deleted and reinstalled the printer, but the problem remains.  To me it looks like a hardware problem (circuits) at this stage.  Thanks in advance for advice about the diagnosis further.

    Thanks rb11, I realized these things (support page, etc.) and the problem persists.  I could add the image of the first page that turned out to be totally black when printing.  If all goes well, I can attach a jpeg file, illustrating the speed at which the page went to total darkness.

  • HP 7310xi - Windows 7 - prints only first page top

    I have a 7310xi AIO Printer printer that works perfectly with my systems running Windows XP.  I installed the printer driver HP AIO 7300 on a new laptop under Windows 7 computer and had no problems with the installation. The pilot reported that the printer is connected and ready.

    Every time I try to print the printer stops and ejects the first page after the first 1-2 "text printed.  The spooler to print in Windows 7 displays "error - printing" message.  Then the spooler retries the operation of print with the same results as above.  The only way to stop him joining must cancel printing from the spooler.

    I have studied similar problems on this forum and have removed/reinstalled the HP AIO 7300, deleted and reinstalled the printer itself, print driver tried different drivers (for example DJ5500) to determine if there is no difference (it is zero, the same thing happens with a different print driver).

    My printer is connected to my network behind a network bridge.  I can connect to the management console HP7310 to the IP address of the printer very well.  All my other systems running Windows XP and have no problem.

    If anyone has any ideas regarding what might happen that I'd appreciate your comments.  Thank you.

    After not receiving any response on this forum, I managed to solve my problem with a print substitute on Windows 7 (64-bit) driver

    After removing the driver for the HP Officejet 7310xi, I have installed and configured the print driver for the HP Officejet Pro K8600 and I can now print very well in Windows 7 64 bit.  The duplex function works fine with this driver as well.

    This proves with certainty for me that there is a problem with the HP 7310xi driver for Windows 7 64 bit.  This forum seems to have paid attention on getting the scanning function works correctly on the 7310xi.  Intriguing in the fact that no one ran into a problem with the basic print functions.

  • Print the first page of a multipage document

    Can anyone tell me, when broadcast a mutipage document printing (in my case a book), how get the first page to print on the right side of the paper?

    At present, all pages except the first print normally (e.g. left and labor right pages side by side on a sheet of A4 landscape). The fist page print however centered on the sheet when it should be on the right.

    I can't add additional pages in the face without messing the page numbering. At least I can but it's embarrassing.

    I've looked through the print dialog but could not find something here that helps.

    Any other ideas?

    I print on an inkjet Canon off ID CS3.

    That's how...

    Add a blank page was completely defined on an even number, and then start a new section and renumber the first real page.

  • In the remote desktop while printing 2 or 3 pages printer usn suite. It is printing only first page. Pls help me solve this problem

    In the remote desktop printing 2 or 3 pages continuously. with the USB printer. It isn't printing first page only 2nd and 3rd pages. But in the task of the printer local special impression is get queue. It's like appear and disappear. Please help me solve this problem

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

    General Forum(Windows Server) Technet

    Hope this information helps.

  • Duplex printing blank pages between the two with forced

    Is there an easy way to force empty pages in the print when printing duplex job, a PDF document?

    It would be great if I could specify in the field of pages in print something like 1-3, white, 4-6, white, 8-10

    The only way I know is to divide it into three print jobs.

    A discovery I made then tests were, I can specify pages to print as 8 - to get everything from page 8.

    Any help is greatly appreciated.

    There is no built-in method to force some pages to be printed on the front of a duplex sheet.

    Manually, you can insert a blank page in the document (assuming that it is not locked against changes) to the appropriate places before you call print.

    Or, possibly, you can write a script to look for some content and based on the current page are same number, insert an extra page preceding these pages. But that would require a very carefully made in the source and the PDF document. I'm not sure that this approach would be worth the effort, however.

    What is usually done in the real world of editing would be to define styles paragraph for section headings, for example, in InDesign, which forces the content to the next odd-numbered page, leaving a blank page if necessary. As the document is changed, the extra blank page is added or deleted as necessary to force the desired content on an odd page, on the front, two-sided copy.

    -Dov

  • Why each print a first page with info (file name, directory, model..)) ?

    I was looking for a solution know how much I printed, some time before and I found... but it keeps printing a page for each print with info... and now I don't remember the procedure I did to get here, so I don't know how to solve this problem... I know that info I geve you is very poor... but I have no recollection of what has past... Thanks for any help Giancarlo

    The additional sheet could be of two types:

    • Page spooler of separation ; Windows and * n * x systems the two supported methods to implement these pages of Division of labour.
    • Information page of document produced by applications such as Microsoft Word.

    You should be able to search these terms and find instructions, specific to your operating system or application version, showing you how to stop their production.

  • Set up printer Laser HP LaserJet P2015d on non-hotes machine by local railway

    I want to install "HP LaserJet P2015d Laser Printer" attached via USB to the PC of my colleague who is running Windows XP, 32-bit operating system.

    My PC has Windows 7, 64-bit operating system.
    Please indicate the procedure to properly install this printer.
    I read on the internet that I need to create a virtual USB port USB001.
    But I am not clear with it.
    How can I create "USB001 virtual USB port?
    PS: The same printer was connected to my system earlier and it used to work properly. I connected the printer via the Local port, but I guess the problem is the compatibility of the driver or so. Sometimes, it will display the error when I give a print job. This scene reproduces a number of times today. I don't know the reason for this error. That's why I want uninstall and install correctly.

    N ° you must connect to this printer with the name "shared" network (\\win7\printer)

  • P2015d duplex issue on new computer

    Cannot get Laserjet P2015d to print double-sided on the new computer with Windows 7 64 bit system.  Go to the Web page that says update driver down to the last 2 days

    Make sure the driver knows that a duplex unit is present on the printer (assuming that one is):

    • For the instance of the printer in question, bring up the printer properties dialogue.
    • Select the device settings tab.
    • Make sure the duplex unit is set to installed and not installed.
  • Photosmart 7510 duplex printing?

    The 7510 will do double-sided printing? If so, how to install?

    Yes, getting the duplex (two-sided) of printing. When you install the HP software that came with the printer, you will see one of the icons is "HP Photosmart 7510 Series. Open, click Printer Preferences. The box that says print on both sides were 'none' will choose. Drop drop-down, two-sided on short side OR back on the long side. You are then ready to go. The printer prints the first page, sucks the sheet back, flips and prints the next page and so on.

  • HP Deskjet 2620 duplex printing option is grayed out

    I just purchased a HP Deskjet 2620, plugged into my desktop computer running Windows XP.

    In the Print Properties window / tab layout, options "Print on both sides" are all grayed out.

    So, instead, I try to use the 'Manual Duplex' box in the MS Word print dialog - it will print the first page, then a pop up tells me to put it back and reinsert it into the printer and press 'OK '.  What I'm doing.  But nothing happens.  The window disappears and nothing prints.

    Help, please!  I have problems printing duplex with all other printers...

    Thank you!

    Hello

    The 2620 Deskjet doesn't support duplex (auto or manual).

    Kind regards.

Maybe you are looking for

  • Satellite C55D - A - 15 H - application of Bluetooth

    I just bought this laptop and to be honest knows very little about them. The problem is the Bluetooth button to turn on & off is grayed and I don't seem to be able to access. In addition, to find in device manager, you must click on the items that ar

  • recovery error code: 0xe0ef0003

    When I tried to recover windows 7 recovery DVD that I created from the recovery partition, I got the error code: 0xe0ef0003 and the PC did not run windows again, so I can't start it anymore, the model is HP G62-121EE... Please help. I think that the

  • Connection PBS on 3rd Gen Apple TV

    The PBS app will not leak any content, it doesn't have for a week at least, on two quads in my house. (Yes, I'm in the United States) The only message I get is "a connection with PBS is could not be established."  Is switched off, back into the thing

  • For wired network and wireless EAP process

    Hello I am confused with the EAP process when compared between wired and wireless. As far as I understand that EAP working if wired authentication of 802. 1 x, the client must have an IP address on this subject in advance. In other words, EAP process

  • UNDERLINED WORDS

    When I use internet, certain words are highlighted, and when you go over it, an ad appears. It is a virus and how do I get rid of him?