HP Laserjet P2035n is set up to print in duplex, but I can't change it in preferences

Last week, I download and print a PDF file. Since then, my HP Laserjet 2035n is configured to print in duplex. Here are the details.

  • I use a laptop HP Pavilion with Windows 7 Home.
  • The printer is configured as a network printer.
  • When I try to print something, it stops after a page waiting for me to re - feed paper manually to print on the other side.
  • It is only this laptop that has messed up. My other computer prints well

When I go to the printers, right-click on the 2035n and select "Printer properties" and look at the bottom of the general tab, it reads in the appearance tab "Double-sided: Yes.

If I then click on "Preferences... "and go to the finishing tab, under Document Options, the box"print on both sides (manually)"is unchecked.

Here is what I tried:

  • I uninstalled and reinstalled the printer
  • I reinstalled printer drivers
  • I tried to reinstall with a different name

Any suggestions? Can someone tell me where the printer preferences file is so I can manually remove and then reinstall the printer drivers? Is there a tool for the P2035N to uninstall everything related to it?

Thank you.

Hello

Please try the following settings:

Right-click on the printer icon, then click on printer properties.

Click the device settings tab.

All the way down, uncheck the option enable manual duplex printing .

Now try printing and search of any change.

Please let me know of any changes,

Shlomi

Tags: HP Printers

Similar Questions

  • I've set up a movie in moviemaker, but I can't play because of error code... COOD11B1

    Hello. You can help me solve my movie, which is not possible due to... .error code COOD11B1.help me difficulty this please... yours, Henry L

    Moved from feedback

    Original title: Hello everyone, I've set up a movie in moviemaker but I can't play because of error code...    COOD11B1 can help you to solve this problem, for me, I would be muchobliged.thank you... Henry L

    Your computer may be missing code, download and install K-lite codec pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code.
  • My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

    My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

    You can not. You must have Acrobat and the file password - change for this.

  • LaserJet M1212nf: Problems setting up wireless printing

    I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

    It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

    Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

    (1) uninstall the current installation of the printer (USB).

    (2) on the printer itself, make sure that the settings > network settings are the default values.

    (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

    (4) when you are prompted, select "wireless."

    RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

    (5) try again once and this time select "Network Setup."

    RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

    If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

    (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

    I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

    I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

    Hello @SKYdiz,

    Welcome to the Forums of HP Support!

    I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

    Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

    All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

    Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

    Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

  • I try to print to PDF, but I can't access the print without a printer window >. <

    In the end, I am creating a PDF to print as a booklet, so that when I take her to somewhere in the impression, like the library, I can just double-sided printing files, and it will be properly implemented.  Unfortunately I can't able to get to the window print, because I don't have a printer connected.  But I'm wanting to print to PDF!  How can I get in print without an attached printer window?

    Acrobat Reader cannot create PDF files. You can create PDFs with Adobe Acrobat.

  • HP LaserJet P2035n: HP 2035n ceases to printing/answer after installing the new toner

    Hi, I work for a School District, we have several of these printers and recently had this problem on 2 machines. Problem is that the printer is completely insensitive after installing a new toner real HP 05a.

    Install toner turn printer on, it passes through the light initialization sequence and shows ready, will not print a test page for the PC, will not print a page of the control panel of the printer configuration, will not be recognized through its USB connection (PC gives same message the USB is damaged or defective), does not pick up an IP address and is not accessible via the Web console.

    Turn the printer off and reinstall the old toner put under tension and everything works again, USB is recognized and system installs the drivers, accessible via the Web console, prints the config to the PC and the control panel of the printer. I have 3 used toners and all three will work with both printers, I have 2 new toners and the two do not work in the printer. Thanks for playing.

    I saw a few client computers and forums on other sites about this issue defective chips on the cartridges-back them and replacements should be good.

  • I have a laserjet 1320 and have lost share printer and duplex with new print driver.

    I guess HP is gong to do nothing about it.  So, I'll probably buy another brand of printer that will support these features in Win8.

    Hello
    Make sure that the automatic duplex printing option is selected:

    Enter the control panel > devices and printers.
    Right-click the printer icon, and then click printer properties.
    Click the device settings tab.
    Set as installed in Duplex Automatic Two-Sided accessory, click OK and check any change.

    Printer sharing is supported, it depands of operating system settings... to provide more details on the problem... I have

    Kind regards
    Shlomi

  • When I select print for a message preview mode, I get an error "the selected printer is not found." I can print the message, but I can't preview the output. I have

    I found that someone else has had this problem, but solution of Matt necessary use of the configuration editor. I followed the instructions, but by clicking on the Advanced tab, there was no Config Editor tab in order to execute the next step of the solution. BTW, I look in the console error log and see what: couldn't read the chrome manifest ' queue: / / / C:/Program % program % 20Thunderbird 20(x86) /Mozilla % 20Files / chrome.manifest'. The error itself is small box with Print Preview error as the label and The selected printer is not found as the contents of the box. Any help much appreciated.

    You look under Tools | Options | Advanced | General? In the main menu, which is the traditional one that spans the top of Thunderbird?

  • I set Firefox to "Run as Administrator" - now, I can't change it. Help please :)

    Hi, I put 'Run as Administrator' to Firefox, and now I can't change it. I tried to uninstall it using the control panel and by the manual method (helper.exe), but neither one will work. I also used the Troubleshoot utility option in Firefox to try to 'Reset Firefox' and it does not work. Thanks in advance for any help.

    I'm glad to hear that your problem has been resolved.

    If you have not already the case, please mark this thread as solved by the solution of marking.

    This will help other users experience similar problems helps to find faster and more efficiently.

  • When I have several tabs open, a color of the active tab is grey, I used to have set it up to be red. How can I change back to red?

    Cannot find where I can change the color of my active tab.

    Where can I get this?

    [e-mail removed by Moderator]

  • Error my firewall setting prevents my printer communicates so I can't print. Someone at - he ever heard of this before? Thank you very much.

    I get the error that my firewall setting prevents my printer to communicate so I can't print.  Someone at - he ever heard of this before?  Thank you very much.

    Hi TreetisEbben,

    I had this problem before, but only when you are using the AVG firewall. Usually, you can go to your factory of the printer to see how to unblock specific ports for firewall. Also, to see if this is the problem, temporarily disable your firewall and then try to print. But don't forget to turn it back on once you're done. I hope this helps!

  • How can I change orientation of the default print Windows 7 landscape to portrait painting?

    Original title: Windows 7 default paint print orientation.

    How can I change orientation of the default print Windows 7 landscape to portrait painting?

    I would not be forced to change every time I have use Paint.

    Thank you, Jay

    Hi Jay,.

    There is no option available to change the orientation of the default Windows 7 Paint print.

    However, you can set default print options to print landscape and impression accordingly paint program.

    For more information, see this link:

    http://support.Microsoft.com/kb/305402

    Hope the helps of information.

  • I have a craving for 120th. How can I change my print head

    I have a desire and a printer of 120th.  How can I change the header information?  Thanks Bob

    Hello lvtastbob,

    Could you please draw on exactly what you want.

    As far as my knowledge is concerned on this printer, it has the ability to 'Header '.

    Header can be generated for applications such as MS Word etc.

  • HP LaserJet Pro MFP M125-M126: cannot set the default printer

    Hello

    We have HP LaserJet Pro M125 - M126 PCLmS network MFP all in one printer, as the installation of all users was a success and was working fine the day of installation, after a day all users face the question cannot set default pritner, cannot print, all users are faced with question at a time ,

    quick response is appreciated,

    Hi @darshan9 ,

    I see that you have problems affecting the default printer for users and you cannot print over the network.
    I'd love to help you.

    Do you mean the configuration of individual computers with the printer on the network users, or a computer with multiple users?

    You have administrative rights on the computer to make changes?

    What is the name and the product number of your printer? How can I find my model number or product number?

    Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

    I suggest you to check if you have another account user or an administrative account.

    I also suggest to create a new user account and check if you are able to set the default printer.

    Create a user account. Create a user account.

    If you're still having problems, run the Fixit tool. Diagnose and automatically fix problems printing and printer.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    If there is anything else I can help you, let me know.

    Good day!
    Thank you.

  • LaserJet P2035n goes into infinite loop when you print from Windows 7 64 bit

    I installed the latest drivers from this site for Win7 64 bt and whenever I try to print on my laserJet P2035n on the network, it goes into a loop and sends the same print job again and again until I cacel work on my PC.

    Anyone know why this is happening and how reolve it?

    TIA,

    Joe

    According to HP tech who helped shed some light on this for me

    for Windows 7 32 bit

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1845552&prodTypeId=18972&prodSeriesId=1845551&swLang=8&TaskID=135&swEnvOID=228

    for Windows 7 64-bit

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1845552&prodTypeId=18972&prodSeriesId=1845551&swLang=8&TaskID=135&swEnvOID=2100

    Right-click on the file, choose Properties, and select the appropriate compatibility mode that corresponds to that specific folder that you downloaded.

    HP technology has solved as fast it takes to install a printer successfully. I went and done it for the rest of the printer to the breast of our society and all the world works perfectly.

Maybe you are looking for