HP Laserjet P3015 Jetdirect RESET Printserver

Similar Questions

• LaserJet P3015: Slow printing to HP LaserJet P3015

  Hello

  I have a LaserJet P3015, which has the "question of slow printing. When I sent a job to the printer it takes 2 to 10 minutes to print. I have changed the drivers, added the printer directly on computers instead of the server. Nothing helps.

  Can you please give me some ideas how to solve this problem?

  Hello

  Thank you for your response. The problem is now resolved. It was caused by the printer PCL6 driver. Switching to PCL5 solved the problem.

• change ip address laserjet p3015

  Hello, I have a laserjet p3015 printer and want to change the ip address. I think it can be solved on the printer, but I don't now how. can someone help me?

  Erik

  Hello

  Since this printer doesnot display IP address must be moved to another computer, to do this, could you please provide more information as it is the printer has already assigned the ip address?, which is the O\S used on the computer?

  Also, you can check the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=3815797&prodTypeId=18972&ObjectID=c01779018

• LaserJet 4250 jetdirect j7949e: firmware for jetdirect j7949e

  Hello

  I tried to update the firmware of the integrated (on my laserjet 4250) jetdirect j7949e, but the version displayed by the built-in webserver (V.33.28.FF) is higher than the latest version offered by hp (V.33.21) - see [1] [2]

  -How is that possible?

  -should I downgrade to the "official"?

  Thank you

  Republic of Korea

  [1] http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpj07429#N102F8

  [2] ftp://ftp.hp.com/pub/networking/software/jetdirect/firmware/

  You should generally only firmware jetdirect integrated by updating the firmware of the printer, since it comes as a set.

  I'll try to remember one of the 4250 printerss to work tomorrow because I have the latest firmware for the printer installed.

• LaserJet p3015: label the value type paper on tray 2 or 3

  Is there a way to define the type of paper label on tray 2 or 3 on the LaserJet p3015?    I alternated installation HP LaserJet like that, but it doesn't seem to have this option.  Since we have an automated process printing labels I can not use the manual feed tray.

  Hello

  I'm afraid that this cannot be done,

  For the 2 and (3) bins, Label is not a supported media type.

  You can see page 78 of the user below as a reference guide, the labels are supported only on tray 1:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c01612470-1.PDF

  Shlomi

• HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help

  I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.

  The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".

  FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.

  EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.

  EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.

  Hey @dselzle,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.

  To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.

  If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.

  If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.

  I hope this helps and I hope you have a nice day!

• LaserJet P2055dn cold reset

  I need to reconfigure a printer LaserJet 2055dn network.  However, I can't know how to do a cold reboot.  The sequences ' press on and press and hold the power on ' do not seem to apply to the 2055dn and there is not a reset option in the menus.  Any ideas that I can do to go back to its factory settings?

  Thank you.

  Sorry, but you have the wrong forum.  These are consumer forums and you need business forums.  Just follow the link and will get you to the right place.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UBwynk2PVM4

• HP LaserJet 1022n cold reset 0.0.0.0

  Performed a cold reset on a HP LaserJet 1022n, with a static IP that is already assigned.

  Bed config page IP 0.0.0.0

  Config-Manual

  I can not connect to the printer to manage the Web

  I think that the best bet now is to update fw on the printer.   You will need to connect to the printer via a USB cable to do the update for your network connection does not work correctly.   Here a link to the fw update.

  That should bring your printer to update or delete the question.  Give it a try.

• the laserjet P3015 printer printing error

  many times, a command is sent to hp p3015 printer, it prints several pages that are blank with small symbols on top and in the upper corners, consisting of arrows and hearts etc. we always to cancel printing, unplug the cable from the d-link and turn off the power then reconnect and then it starts to print ordered initially.

  Help, please

  Hi cimane10,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• LaserJet P1102w password reset help please

  Hello

  I hope someone can help me. My problem is that when I first installed the wireless printer (for safety as you do) I put a password on the Control Panel, but since then have changed my internet provider so I need a new wifi connection but cannot access the printer control panel.

  Before that I was loving the ease of being able to print the move but not more

  Help, please!

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/Admin-Control-Panel-password-reset/m-p/2701013#M94928

  I answered in the link provided above.  It comes to your other thread on this topic.  I hope this helps.

  Jason

• LaserJet P3015 - Duplex + letterhead

  Hello

  I have a strange pair of P3015 wishing to print documents of letterhead backwards.  The printer actually pulls the paper normally, steps back and prints on the back side as duplex printing.  Print on the plain/letter carriers works very well.

  Duplex on the built-in Web server is disabled.  The two-sided accessory is uninstalled on the settings tab of the device on our Win2007 print server.  Document settings and the application on our computers of users use either no duplex unit.

  Any ideas on what could cause this behavior?

  Thanks for the quick response.

  I checked this thread and tried to update the firmware first.  After that the update of the firmware was unsuccessful I tried to contact HP to get my hands on the .prn file that has been mentioned.

  After you apply the All_ALM_Types_OFF.prn on my P3015 the problem disappeared.  Fixed a nice and easy once you have the file.

• LaserJet p3015: print with the printer driver universal pcl 5 of Collator

  We use the universal PCL 5 driver for printing on a Windows 2008 R2 file and server to our printers laserjet printing network.  Our enterprise application doesn't have a way to bring together several pages together, so this will be done by the printer driver and settings.  However, I don't see an option to collect pages in the printer settings.  Is this possible with the PCL 5 UPD or it will need to be upgraded to achieve?

  As I mentioned in my previous answer, most small LaserJet printers will not print collate.

  They will just print a copy, or (as your symptoms seem to suggest) just ignore the Collate setting.

  This is because the true ranking of multiple copy requires the use of Mopier Mode, which in turn requires the availability of a hard disk of the printer - printers in most small do not have a mounted hard drive.

  To get the same effect as the standings, drivers for these printers will send multiple copies of the print job in the same connection.

  But they do if the driver configuration indicates that Mopier Mode is activated, so you must ensure that the configuration shows that it is disabled.

  

• Color Laserjet M252dw: Cannot reset the printer

  I'm unable to access the configuration screen to reset my printer because I keep getting prompted for a password that I unfortunately forgot the setting.

  How can I reset my printer in this situation? Thank you.

  Try the lower-left corner of the menu for a great memory NVRAM reset. The same procedure as above, except that you press the left instead of the right.

• HP Color LaserJet M277dw MFP: Reset password - HP Color LaserJet M277dw MFP

  I forgot the password for the printer and may not know how to reset to factory settings (or the password itself) without entering. How can I reset the password?

  (To be more precise the password I put is not accepted eventually, but probably that I misspelled twice... (length 20, lowercase letters and numbers)

  This is a bug in the web interface!

  Solution: The length of the password must be maximum. 16 characters.

  (There is no warning when setting the password.

  But when you try to change the settings (safe) later, you will need to use the first 16 characters of your password!)

  PS: To reset the printer I pressed the lower left corner of the touch screen + home + back while turning on the printer

• m277dw: the Laserjet M277dw password reset

  I changed my password for wifi and the config of the printer had to be updated but the printer keeps asking for an admin password that I forgot. How can I reset the printer password?

  Thank you

  I found a way to reset the printer:

  1 - power off

  2 - Press and hold home + back + bottom left corner

  3 - Turn on and now the combination above

  Note: it took me 4 times to touch the right side of the buttons, but it has finally done.