HP laserjet pro 1536dnf: Error 49 turn

We are ussing two different HP Laserjet Pro 1536 DNF at two different place and both are connecting over the network. Yesterday sudenly received the same error error at the two printer (error 49 turn market) Please suggest what to do now, as the two user loaction are unable to use printers

>... updated the Firmware of the AIO Printer HP laserjet 1536dnf printer. Now deleted error and the printer doesn't work...

No doubt which implies that some print jobs or discovery was originally the firmware fails, and the new firmware can manage correctly the content of these jobs.

Tags: HP Printers

Similar Questions

  • Color LaserJet Pro M252dw: "error memory of supply" for a cartridge after software upgrade. Now unusable printer

    Software update on October 8, 2016 resulted in 'Providing a memory error' for the Cyan cartridge. Co-incidentally, it's the only 3rd - Party cartridge in the machine. All cartridges were working perfectly before the upgrade. The machine is now completely in-can be used as the message seems to inhibit printing.

    The cartridge is more than 80% full and I do not wish to replace in an attempt to achieve a solution in this way.

    I tried:

    * Remove and reinsert the cartridge

    * re-start in as many ways as I can think.

    * check whether the absolute latest version.

    * Search the forums for any solution - without success and similar messages

    I have an urgent need to print and I am very unhappy that I have no way to contact HP directly a defect in software on a product a few months out of warranty. I hope that I will not this escalation outside HP.

    Hello

    Use this tool to downgrade the firmware to an earlier version that doesn't authenticate the security of the cartridge chip, then check for the difference:

    http://ftp.HP.com/pub/softlib/software13/COL66159/LJ-162324-1/M252_Series_FW_Update-20150716.exe

  • LaserJet Pro CM1415fnw: Error Codes

    Can someone tell me what the error code 59.le CO means? It came after I installed a new cartride and tried other chip or snack just the cartridge was bad. I only use genuine HP products. The error code is not explained ONHP websites and the support.com says that he won't answer questions about this product. Help!

    This removes a developer motor rotation error, which is essentially the motor of the toner cartridge.

    It is possible that you have installed a cartridge that is closely related to and something got damaged.

    You can do a search online for the Service Manual of this printer and you should be able to find one, but it won't be on the HP website.

    If my post is solved your problem and click the accepted as button solution under him.

    In order to thank a Tech for a post click the thumbs up button under the post.

    You can even click on the two keys...

  • Service error 49 - Turn Off, then on - LaserJet Pro 200 M276nw

    I was the addition of another post for a different printer but didn't want to Miss anyone with MY printer problem.

    UPDATE * (at least for my LaserJet Pro 200 M276nw)

    I found the cause but will need help from someone at HP to "solve" this one...

    My new guard M276nw throw a 49 Service error, CAT has given a lot of power, voltage on, wait, try again blah blah blah, blah blah fuser problems. 10 minutes from the forum search put me on possible wireless network issues with other printers and the SSID. Anyway after regaining a printer Staples and saw the problem coming up again on a new another brand... I tried the search Forum and Tada! at least I was able to find a cause.

    I have a D - Link DIR-825 wireless router. He has dual band (2.4 GHz and 5 GHz).

    Normally I enabled for the multitude of devices that people have these days in my house.

    I updated the firmware to the last update (20121026) and then restarted.

    Roger restarted shortly after error Service 49.

    Then I disabled the two strips to test each independently wireless band.

    The printer acted normally so I decided allow each band separately.

    When I turn on the 2.4 GHz band in the router, the printer immediately throws an error in Service 49.

    I tested several times (5 to be exact) and every time when the router restarts the printer says error.

    So, I left off 2.4 GHz band and then the 5 GHz band.

    I activated the band 5 GHz 3 times and turned off and found no effect on the printer (at least in a 5 minute window).

    So now I'm left with only a single band wireless router or printer who likes to turn on every 20 minutes or more.

    There is probably a setting (or 2) which can be changed in the router or printer that can prevent this (I hope).

    I just need to find the right person in HP...

    I should have updated this thread I'm sorry, but I found myself updated the same problem on another thread of printer M251nw, since someone has answered that one. I have to keep that one thread - sorry, but it seems to me that I just heard another as well, but for a m475dw as well. Maybe the same problem that I don't know.

    Anyway to update my m276nw situation: After experimenting for a while try to limit I decided to eliminate the possibilities by disabling my router another suggestion of posters to remove the printer from the wireless environment and reset to factory settings. So I turned off my 2.4 GHz band in my router (leaving 5 GHz active), reset the printer and it was sitting still (no reset), he even went to sleep normally. I turned on the 2.4 band and the printer immediately threw the error repeated tent kept the same result no way to leave on the 2.4. The next day so I decided to check my router and found 2 year old firmware. It took several updates to get current and on the last I didn't reset the printer to the factory again and there's no error yet. The printer acted normally for a week, he normally sleeps and wakes. It was turned off (on purpose) a few times and everything seems normal.

    I have not activated wireless again since my house is wired and I could really do without wireless capability, but eventually I want to know.

    My DLink DIR-825 router is still active with both tapes, but using the latest firmware, like the new printer (the other). Is all this took?

    Perhaps.

  • LaserJet Pro M125nw MFP: webservices - error 'connection '.

    I'm having a lot of problems trying to start printing. Im trying to print from my new acer Chromebook to my new also Laserjet Pro MFP M125nw. bought together, the sales guy told me that it should work...

    I plugged the printer into my own network (configuration page shows)

    I've added on the cloud of google (shown in the list of printers)

    I've added a ([email protected]) own e-mail adres

    When I'm connecting to the IP address of the printer and try to accept (turn on) the Web services page, I get the error: Connectionerror, check to the Internet.

    I tried to connect with a cable on my router, then its very simple and everything works.

    I hope you guys can help out me!

    Erwin

    Hi @Nosepowder

    Thank you for the update.

    I recommend at this point, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

  • LaserJet Pro M276nw: M276nw LaserJet Pro 200 connection error / update Firmware

    I'm trying to update my firmware on my printer wireless.  The current Firmware Datecode is 20121026.  I have run the wireless network Test report and the summary network and it shows the printer connected and on the correct home network.  I have no problem printing, however, when I go to Check for Updates I get the following message:

    Connection error

    The printer cannot connect to the service.  Check the Internet connection.

    Any suggestions?  Thanks in advance.

    OK, you got it the second time. Not all of the SAP is unified in the layout. It is more difficult to stay on top, but you found it. Ok. Always make the mistake so. This is not good.

    Looks like the printer is blocked. You have reset the network?

    Turn the printer off and unplug the router for a minute. Then when the network has restored himself to try to update the firmware again.

    You may need to update the firmware via a USB connection. This link will take you to the page of software and the printer driver. Software and pilot results for: HP LaserJet Pro 200 color MFP M276nw.

  • LaserJet pro 200 driver installation error

    We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

    3022 wrote:

    We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

    Is it the driver of your trying to get?

    Pilot product page...

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4138 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5097654 #n187

    Driver Windows 2012

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kJ-107843-4 & CC = US & DLC = in & LC = on & os = 4138 & Product = 5097654 & sw_lang =

  • HP Laserjet Pro M176n: 22 Scanner error and error of WIA

    I have two problems with my HP laserjet pro m176n. He continues to display an error scanner 22. If the error 22 disappears after resets repeated, the scanner is not scanning. The mistake this time is unable to communicate with the scanner. Using the scan HP and printing doctor gives an error of WIA. I tried all the reset options.

    Hello

    A 22 Scanner error indicates a hardware failure.

    Once the error of compensation, can you managed to make a copy form the device?

    If you can not make a copy, the error of WIA is not related to the problem at all, but the scanner is not working.

    If you are able to make a copy, check the following on your PC:

    In Windows Explorer, click with the right button on "This computer", and select manage.

    Select Services and Applications, and then click Services.

    Open the properties of the Windows Image Acquisition (WIA) service, then the Dependencies tab.

    See the Hardware Detection kernel as described below or may service only the RPC Service is indicated?

  • turn off the broadcast without wire - HP laserjet pro 400 color mfp m475dw

    How do I disable broadcasting SSID for HP laserjet pro 400 color mfp m475dw.  I disabled the configuration via the web console wireless printer, but it is still broadcasting.  I also updated the firmware to 20131028 last available.

    Since it is wiered one of the scenario, I could solve this with the help of the HP Support is by doing factory reset/NVRAM reset the unit by turning the printer and holding right arrow and cancel on the touch screen of the device (cancel is on the lower right of the touch screen on the black area and right arrow is just above him (one in the middle of the Panel) in the same black box) and the device of turning on until the message something like storage reset... is displayed and can release the two buttons/zone button.

  • HP laserjet pro cm1415fnw don't scan error WIA.

    We just got a hp laserjet pro cm1415fnw, he manages to print, but unfortunately it will not scan. We have set up to be wireless since it will be used by different users. When I run the HP printer and scan Dr. it is said that there is an error of WIA. I've tried uninstallin and reinstall all the drivers and software, as the recommended HPPSdr, nothing happened. I went in the forums and checked the services that should be running for the scan to work. All services have increased, but still it will not scan. I'm running out of options here with this device. If someone could please give me some advice on how to solve the problem of scanning, I will be extremely grateful.

    Hi @sil89,.

    I understand that you are unable to scan, but you can print on the wireless network. I can help you.

    You can scan from any of the other networked computers?

    You are signed is an administrator of this computer?

    The WIA drivers are part of the Windows operating system.

    Run this made it Microsoft tool to see if it will solve this problem.

    Diagnose and automatically repair Windows files and records issues.

    I tabled this document, just to make sure they are the same ones you had checked.

    This document is to check the services of Windows Image Acquisition (WIA).

    Windows: Digitization of HP Software Does not open or Scan to a printer using a USB connection.

    Do not take into account the title.

    Proceed to Solution 3: check the Windows Image Acquisition (WIA) services.

    Temporarily, run Antivirus software and try to scan the image.

    If the problem persists, download and try to repair the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

    Back up the registry first.

    How to back up and restore the registry in Windows.

    Restore default startup for Windows Image Acquisition (WIA) Type.

    Please let me know the results.

    Thank you.

  • Example: hp laserjet pro 200:10 000 supply memory error

    How can I clear the error message 'error of memory offers 10 000' on my color Laserjet pro 200. The host is wins 7 ultimate on lan

    Can someone help me?

    Thank you.

    My toner is reloaded and the error persists. However, thanks for the info.

  • LaserJet Pro M251nw color 200: Wifi turned off but still broadcasting

    Hello

    First, forgive my English.

    I have a HP LaserJet Pro 200 M251nw color, it has a capacity of wifi. Because the printer is connected with a cable ethernet to my router, I don't think that he had to use the wifi built into the printer.

    Thing is, when if I disable the wifi of the printer, and even if I disable "wifi direct to print", I can still see the SSID of the printer on my devices House (200 HP-Print-a6-LaserJet color).

    I looked on the forum and I tried the 'factory reset' turn, unplug the printer and taken, wait 15 seconds... etc. It did not work. I also installed the latest firmware.

    Any help would be greatly appreciated! :-)

    Hello revlib,

    Welcome to the Forums of HP Support!

    Turn off the wireless directly on Color LaserJet Pro 200 M251nw should have disabled the SSID broadcast. Since the display before disabling has not resolved, try the built-in webserver (EWS).

    To access the built-in Web server, you will need to enter the IP address for the M251nw in the address bar of your web browser. The IP address may be collected by touching the Setup program () > reports > Network Summary.

    Once in the SAP, click on network > wireless direct configuration > select and apply.

    Let me know if this has help

  • Reference Dell D10S: Software 451dn Laserjet Pro 400 has error during installation.

    LaserJet works fine when plugged in to USB, but now moved to a place wireless. The software will not work.

    I tried install printer Win 10: "the pilot is not available.
    Tried to uninstall the universal printer driver, restart, reinstall the HP driver, error (without code).

    HP Print doctor can find the device downloads the latest version, but it crashes every time (error, no codes).

    Win 10 can see the printer... it is therefore in the range wireless.

    I tried all the software different packaging to win 10 on HP site... all get an error during installation.

    Here's what worked.  I downloaded the universal print driver from HP.  These installed to their default location.  Taking note of where they have installed.

    Then, 10 Windows, try installing the printer laserjet Pro 400.  "Missing drivers".<- this="" is="" an="" important="" step.=""  leave="" the="" printer="" icon="">

    Then go to control panel, small icons.  Device Manager.  Search for printers, find the Laserjet printers.
    Right-click and choose update drivers.  Do not update automatically.  Choose the manual option.

    Look for the universal printer driver.  Wait a minute... BOOM.  All right.  Printing of all wireless PC and laptop.

  • Turn down the volume on the tone and ringing for HP Laserjet Pro M1536dnf

    We recently bought a Laserjet Pro M1536dnf.  I went through all the menus as well as the user's guide.  How do you turn down the volume for outbound faxes?  The tone and the call for ringtone is too loud and disturbing for the workers in the room where the fax.

    Hey Candlmc,

    If you press the key on the front panel of the M1536dnf, then you will be presented with the configuration menu.  Highlight the menu of system configuration and select it.  Scroll down the menu for the Volume settings and select it.

    This is the section that will allow you to change the ring volume and the volume of the phone line.

    Hope this helps,

    Jason

  • Multifunction Color LaserJet Pro 500 570: laserjet pro 500 color mfp software installation error 570dn

    Whenever I try to install my new printer, LaserJet Pro 500 color MFP 570dn software I get an error at 80%.  I tried using the disc that came with the printer and download the full software directly from HP.  I also tried with my anti-virus and firewall disabled.  I am running Windows 7 64 bit.  This is a new computer.  I was able to install it successfully on my old computer with the same OS.  I spent hours trying to solve this problem.  Help, please!  Thank you!

    Most of the time this means that there is something on the computer to interfere with the load.  The disk will be a file called scrubber.exe.  Find and run the program to remove any trace of the software of previous attempts and see if that solved the problem.  You can check in the Add Remove programs on the computer to see if the software of the printer has loaded in the past and if so, remove it before running the routine of the scrubber.

Maybe you are looking for

  • In Firefox 9.01 and 10, I find no option to close a window.

    There used to be an option to close this window under file. I don't see this option any more or in another way to close an individual window.

  • The laptop ITunes is to change languages by himself

    Hello. For some unknown reason, iTunes - English Japanese on my laptop (Windows 10 64-bit, iTunes 12.3.2) suite of other discussions I've done the following without result: 1 uninstalled iTunes, made sure that I had the most recent version and reinst

  • Screw immediately the tag sale at the opening

    What if all I do is open a VI - I do not even clicking the mouse, change views or whatever it IS, it gets the asterisk in the title showing that it has been changed.  But nothing has changed. How to stop this behavior which includes asking me if I wa

  • Can a part (test point hole) have the characteristics of a via?

    I use a group of 'plated parts hole' as. connectors 100 "centered on the edge of a PCB. I created a symbol of connector 1 pin in Multisim for this purpose. I need my PIN 1 symbol to behave as a Via the fact once in Ultiboard (i.e. have the option to

  • Svchost.exe using excessive hard disk

    After the latest version of windows update 29 June downloaded the file SVCHOST. EXE is using memory and excessive hard drive. I have 6 GB of memory and an Intel! 3 processor. The svchost.exe blocks all other processes and prohibits the normal use of