HP LaserJet Pro 400 color M451dn

Similar Questions

• HP Laserjet Pro 400 color M451dn - printing problem

  My printer is a line on the left side of the printed page.  I ran the process clean but no good.  On the printing of multiple pages, it's even worse.  Don't know where to go from here.

  To look further, I got a replacement of black toner (HP geniune).  I replaced it with your suggestion and it corrects the problem.  I am very grateful because I print various legal documents of 5 to 10 a day.  Thank you very much.

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• turn off the broadcast without wire - HP laserjet pro 400 color mfp m475dw

  How do I disable broadcasting SSID for HP laserjet pro 400 color mfp m475dw.  I disabled the configuration via the web console wireless printer, but it is still broadcasting.  I also updated the firmware to 20131028 last available.

  Since it is wiered one of the scenario, I could solve this with the help of the HP Support is by doing factory reset/NVRAM reset the unit by turning the printer and holding right arrow and cancel on the touch screen of the device (cancel is on the lower right of the touch screen on the black area and right arrow is just above him (one in the middle of the Panel) in the same black box) and the device of turning on until the message something like storage reset... is displayed and can release the two buttons/zone button.

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

  I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

  10 64-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

  10 32-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• laserJet Pro 400 color: printer

  Hello Mr President
  I want a help on your part I have a Color LaserJet Pro 400 m475dw MFP
  and when I turned it on. I show masseage like this {10.1002 electric memory error}
  How can I solve this problem, Mr President

  Hello Sir,

  The error that you expose is a problem with one of the toners.
  The magenta to be precise.
  
  In this case, the recommended action is to replace the magenta toner with an original RESUME.
  
  Kind regards

• grinding noise when my HP LaserJet Pro 400 color MFP M475 calibrates

  When my color HP LaserJet Pro 400 MFP M475 recalibrates, I get a grinding or gear sliding noise.  No idea how to fix it or what to look for?

  Noise problems are difficult to troubleshoot remotely and they could easily mislead even when we are near the unit.

  Please confirm if the noise is a squeak or a noise squeky/hum.

  As you mentioned that this happens only during calibration, it is why I suggest you to double check & validate your toner cartridges.  Among the toner cartrdige is maybe defective and causing this problem.

  If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.

• HP LaserJet Pro 400 color: HP Laser Jet Pro 400 color M451dn

  Just got back from vacation and the language on the digital screen has changed I have know idea what language it is, how do I get it back to English.

  Thank you!

  MontC

  You can try the steps below to change the language to English:
  1. Click Start , click all programs.
  2. look for the HP list, that you highlight of HP, right, will open another menu that displays your printer.
  3. highlight the name of the printer, and that opens another menu with box tool from the HP device. Click the device HP Toolbox.
  4. a page opens. Click the System along the top and which opens a drop-down menu. Click on System Setup. This page of research and in the middle is language and select English. Click apply and close the window.

• HP LaserJet Pro 400 color MFP M475 - driver Linux

  According to the product description page, this printer is supposed to have a Linux driver available, but I can't locate one.

  Nobody knows where and when you can be available for download?

  Thanks in advance.

  HP LaserJet 400 colorMFP M475dn NPIE7A8DA

  OS: Linux (any flavor)

  I think that this is the site you need to get the information you're looking for:

  HP Linux imaging and printing

  Supported printers

  MFP color HP LaserJet 400 m475dw

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• Is the source Support 2 faces 476DW MFP HP LASERJET PRO 400 COLOR document

  A client must be able to analyze and automatically copy 2-sided documents.

  It is clear to me from the leaves of manual and specifications if the ADF of MFP 476DW will automatically handle documents sources 2 faces.

  There is a comment "document feeder of 50 pages with copy double-sided electronic and detection analysis and multiple choice", but nothing in the scan or copy of the sections of the information sheet or manual.

  Can someone confirm that this model will support scanning and copying documents source face double?

  Thank you
  Sean

  Hello Sean,.

  I understand that the MFP HP LJ 476dn Pro and 476dw only supports automatic copy/scan side 2 option.  Automatic 2-sided printing option is not available with the 476nw model, but the ADF scanner always supports the automatic management of document side 2.  Please see the product information available on the following HP to understand the available models & features supported:

  http://www.HP.com/hpinfo/newsroom/press_kits/2014/MWc/ColorLaserJetPro_MFP_M476_datasheet.PDF

  If you are looking for measures actually work to copy/scan, then you can consult the user guide or links to product support available on hp.com (www.hp.com/go/support).

• HP Laserjet Pro 400 color M451nw - formidable error 79; Turn on/off.

  By HevnLgh; Asked me to this post in the trade forum.

  I scoured the internet to find a solution to my problem and I can't find an answer for her.

  Error 79 came in our printer last week and has not recovered since.

  Here are the solutions I have tried or attempted to have tried:

  • Soft Reset - it turn off and save
  • Hard Reset - unplug the power cord for 60 seconds or more and in him plugging back in
  • Do the above AND have the network cable unplugged everything by
  • Tried to update the firmware. Cannot. The printer makes a loop in a ready state in error 79. When you try to connect using a usb cable to update, windows can't detect the printer during the loop it is in error 79.

  Any ideas?

  Thanks in advance.

  If you turn the printer off, unplug the network cable and only connected on power and then turn on and you get the error 79, then the trainer is toast and needs to be replaced. If on the other hand with the network cable disconnected it is loan and only goes to the error 79 when the network cable is connected, then that would mean you have a bad job in the system tries to print whenever the printer talks to the network and you must remove the computer or server.

• HP Laserjet pro 400 color MFP M475dn

  Hello

  I use my all in one printer including Telec.

  Fax works fine but what is possible when an incoming fax can print on tray 2?

  When a fax is coming, the fax is now taken paper from Tray 1.

  Thank you

  Mathieu

  OK... found out some information that should solve your problem:

  You will need to access your integrated webserver (EWS) > locate the IP address of the printer > what enter in a web browser > access the built-in Web server.

  Go to the System tab > installation paper > keep your the same default settings > change your settings from Tray 1 to the letter, any size. Keep the tray 2 settings > any size, any size. Save the settings.

  By substituting the default settings, this should change where your paper fires.

  Let me know how it works... good luck.

  

• HP LaserJet Pro 400 color MFP TOUCH SCREEN M475dn

  Touch screen Frozen-Unable to fax, scan

  Hi Pattie,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps, have a nice day!