HP LaserJet Pro M225dw: HP LaserJet Pro M225dw

Hi team,

I want to by a printer all-in-one HP LaserJet Pro M225dw I need to use the fax module.

Please confirm that I read on the Manual: with this machine, I'll be able to use the option "fax on the record. (to send incoming faxes to a network shared on Windows Server 2012r2 folder)

Thanks in advance: Gabor

Hey Gabor,

This is INCORRECT, the M225dw is able to scan to a shared network folder does not receive faxes to a network shared folder.

You can find the specifications below:

Printer management
Windows: HP Device Toolbox
Status Alerts (default install)
SNP Alerts (minimum network install)
HP Web Jetadmin (download); HP Scan; Scan to Email Wizard; Scan to Network Folder Wizard; Fax setup Wizard; HP Send Fax; LockSmith; FMS; RM; Mac: HP Utility

The software of the printer can receive faxes to the computer via the HP software, and not in a shared network folder listed on page 69 of the user guide:

The product can save incoming digital faxes to a computer folder. Use the HP Digital Fax Setup Wizard to configure the settings. This feature is available only for Windows.

In addition, such a feature of the software is not supported on server operating systems, print driver is only available by using Add Printer Wizard for Windows 2012 R2 Server 64-bit listed on page 3 of the user's guide.

Receive digital faxes to a computer cannot be defined by installing the complete HP software on Windows XP (SP2) to Windows 8.1 to save faxes to a folder on the PC, so you can share this folder on your network.

Kind regards

Shlomi

You can find the user guide at the following link:

http://h10032.www1.HP.com/CTG/manual/c04316164

Tags: HP Printers

Similar Questions

  • LaserJet Pro M225dw MFP: Problems of scan to network folder

    Hello.

    I set up a portable computer with the printer mentioned above. No problem printing and no problem to set up Scan to network on the web interface folder (ran test and got the result OK) but there are issues when scanning in fact the printer. I put it in a document to scan in the top loader, select scan, scan to network folder, your computer (or rather folder name) and click Scan. The printer draws the paper and then started working. A pdf document will appear in the folder, the printer is how ever is already done. He keeps grinding on it for a while and then the signals being completed. At this moment, the pdf file disappears from the record.

    What could cause that?

    Hi @M3rLiN_74,

    Welcome to the HP Forums!

    I noticed your post about how you cannot scan your network with your HP LaserJet Pro MFP M225dw 10 pro Windows folder. And I'm happy to see it for you!

    This could be a problem with the charger of the printer, or perhaps a connection software / junk the computer. What happens if you try to scan to network folder using the glass of the scanner of the printer? Are you able to scan from the computer by using the top of the charger page? Scanning the computer (Windows).

    For the moment, please try our HP print and Scan Doctorand let me know what happens!

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope hear from you soon!

  • HP LaserJet Pro M225dw MFP: HP LaserJet Pro M225dw MFP scan file format

    Hello. I just bought HP LaserJet MFP M225dw Pro. Then I learned that it scans the file to only PDF, JPEG, and PNG.  But I need to scan in "TIFF" files very often.  Is there a solution to my very important problem?

    Hi @Eliph,

    I see by your post you need to scan files in tiff format. I would like to help.

    Through the HP software, that it only supports JPEG, PDF, PNG format. How Scan: Windows 8

    You will need to use a third party software or scanning software to convert the scans in Tiff format. If you search online, you will probably find a compatible.

    I hope this helps.

    Have a great day!
    Thank you.

  • HP LaserJet MFP M225dw Pro: Cannot install hp HP LaserJet MFP M225dw Pro software

    Using the menu scan on HP LaserJet Pro MFP M225dw, I want to be able to choose Scan to PDF, but it is not available.  I downloaded the hp for Windows 10 software but still get an error message after it gets to 99%, saying she was taking too long to install.  Any ideas?

    The fixed!

    Was connecting via a cable of good but the installation via downloaded software did not.  Had wireless and installed perfectly!  Scanning to a PDF file now!

  • My MFP HP Laserjet Pro M225dw stuck on HP «Initializ ing» logo

    I have a HP Laserjet the MFP Pro M225dw, less than a year. After having turned off for two months, he's stuck on the screen "Initializ ing" the HP logo.

    Can somone advise how to start?

    Greetings @LeeSRQ,

    Thank you access the Forums from HP Support for extra support! I see that the printer is locked during initialization after you have not used for two months. I will do my best to help you with this problem.

    Try a hard reset to see if that will solve the problem.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    I suggest to try and update the firmware of the printer. It always needs to be updated even if the printer is in an error state: HP LaserJet Pro Series Firmware Update Utility. Just select your operating system.

    I'll send you the reset of the printer try in a private message.
    In the forum next to your handle name simply click on the envelope to see.

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
    Please let me know the results. Good day!

  • M225dw MFP HP LaserJet Pro: Save Scan not responding

    Once a document is scanned, I click on save, start and go through the correct folder and it (no longer save).

    I need help!  Any ideas?

    Hi LolaTheCat,

    Thank you for exploring the HP Support forums for a solution to your problem of scanning.

    I understand that you use a M225 MFP HP LaserJet Pro with a PC of Windows 8.1, and the 'Save' button became unresponsive. I would like to help with that.

    I would like to begin by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many problems of printer software.

    Please let me know if that solves the problem, or if you need assistance.

  • HP m225dw: my HP Laserjet Pro M225dw MFP is stuck on logo HP "initialization".

    Help!  I did everything suggested in previous posts, but my printer is still initializing mode.  Too bad I saw work scanner, but I was stuck initializing mode to try to solve all these problems.  Help, please.

    Hey @missmgm,

    Welcome to the Forums of HP Support!

    I see that you have some problems with your M225dw Laserjet stuck initializing. I can help you with that, but I'll need to know what troubleshooting steps you have tried first. Once I know that I will be better able to help you.

  • LaserJet Pro M225dw MFP: No tray 2 in M225dw MFP

    Installed printer works, but all print jobs are sent to the Tray 1 ("default"), but I want 2 set to be the default (at least to use it) because he is bigger and hold letter-size paper I use generally. All installation methods I try, tray 2 is not at all - only Tray 1. How to set for tray 2?

    Hello

    The M225 Laserjet do not ave a second tray, so such a will not appear in her hair.

    The printer have a main tray and a bin priority above its coverage, priority tray can hold up to 10 sheets of paper.

    A tray of priority may not be selected manually and should not be included in the driver, once you place a sheet in the priority as the main tray tray, you must remove any paper then it will use this sheet, which meant only to allow using a different size than usual more easily.

    You can track page 17, how to use it below:

    http://h10032.www1.HP.com/CTG/manual/c04316164

    Kind regards

    Shlomi

  • 225dw MFP: scanning with HP LaserJet MFP M225dw Pro

    How can I get the 222dw MFP scanning via direct USB connection on the printer.  He seems to want to work through the network. Printing works fine, but it won't scan.

    USB cable is fine, the printing, scanning simply do not.  Past 1/2 hour with HP technical support (it is hard to find, but once you do, they are useful), install the drivers somehow could not install the scan driver, did that, now the digitization of works.

    Thank you!

  • HP LASERJET PRO M225dw MFP: MFP M225dw, BLOCK JUNK FAXES

    CAN'T FIND A SETTING TO BLOCK JUNK FAXES

    Hi @RTRP ,

    I see you like to block unwanted faxes. I would like to help you today.

    You can access the unwanted faxes, by clicking on the Fax icon, select Fax Menu, delivery Options, block unwanted faxes. The options listed are:

    • Add the number
    • Remove the number
    • Remove all numbers
    • Print a list of unwanted faxes

    Have a great day!
    Thank you.

  • HP LaserJet Pro M225dw MFP: HP LaserJet Pro M225dw ring volume MFP

    How can I disable the fax sound ring?

    Hello

    Faucet installation the printer, and then select the System Configuration.

    Volume settings and then press ring Volume.

    Select off, then press OK to confirm.

    Shlomi

  • HP laserJet MFP Pro M225DW printer: printer HP laserjet MFP M225DW not install on windows Xp sp2

    During the installation phase, I get a fatal error:

    A fatal error occurred prevents use of the product.

    Click 'Cancel' to cancel the installation.

    No reason. No work around. Reset did not work. Download the basic driver came with the same error.

    But installed on Win 7, 8 succeed.

    Help, please.

    Hello

    Printing software requires Service Pack 3, you can find system requirements below:

    System requirements: Windows XP (32-bit) Service Pack 3http://support.hp.com/us-en/document/c04328137
    

    You can follow these steps to upgrade your operating system, it is necessary to install the HP software for your printer:

    http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    Kind regards

    Shlomi

  • LaserJet Pro m225dw: I can not access my configs online printer.

    I tried to connect my printer to Hp web services. HP support says to change the ip address of my printer out of the DHCP range. Range of my router to 192.168.1.2 to 192.168.1.254.  I changed the ip address of my printer 169.254.26.235 to 192.168.1.255. Now, when I type in the new or the old ip, it does not take my worms the printer configuration page. Help, please.

    Well, I found the soluion. I printed my network summary and found another ip address which is in direct settings wireless printers. I have connected to the network and can access the setting of my pc. I changed the main ip address to something else in the meantime and he is now.

  • M225dw LaserJet MFP Pro: MFP M225 DW wake

    I installed a MFP M225 DW, which will not be every now and then to wake up when you send a print job, you must turn off the printer and then back on again, the print jobs that were sent then print ok and it can run then ok for a few days or a week, the printer is laeft on permantly... I went through the menu and checked everthing to wake up, I've updated the firmware to the last available on HP website

    It is connected via USB to a desktop pc and a wireless laptop both running windows 7, happens to these two machines... any suggestions appreciated

    Rob

    Sorry missed that one.  In this case...

    Your USB is off via Windows.   You just need to stop it.   Go here.

    http://helpdeskgeek.com/Windows-XP-Tips/prevent-Windows-from-powering-off-USB-device/

  • My MFP HP Laserjet Pro M225dw is stuck on logo HP "initialization".

    I have the same problem, the printer will not complete the power on the initialization sequence.

    Gemini02

    It seems I owe you an apology... unless your last instructions work apparently.

    I had not thought that the printer would react on the network if it was still initializing.  To me that sounds like he is yet to start, but I guess that networks was on before it got stuck.

    In any case, this afternoon that I turned on the printer back, plugged into the USB on my HP Envy 17 t, downloaded the updated firmware June 2015, he ran, he updated the firmware of the printer and the printer restarted and got thorugh to the homescreen on the screen.

    Then I configured for my home wifi network and it attached to my router.

    Then I opened the EWS page and left the IPV6 and changed to static IP address.

    Jolly good so far.  Now I can try the electric bike on the printer several times and see if it remains functional as expected.

    # 1 power cycle: OK

    Cycle 2 # power: OK

    # 3rd power cycle: OK

    power cord removed 15 minutes

    # 4 power cycle: OK

    So now, it seems to work.  I can't understand why the HP Chat person said if go, they could not help, wouldn't do anything.  Made me give up and replace it with a brother who works really well and seems a lot more elegant than the M225 although it has better file (print speed, duplex scanning) and still has all the other features of the M225... and it cost less than $ 150.  Don't know why HP continues to be #1 with brother beating develop products and price, and I must say that I am impressed with their email ollow-up top and providing support tools and a willingness to make me happy... so better service than HP as well.

    Hmm, I guess I have enough negative look on HP.  Sorry if this colors your enthusiasm for HP.

    Thank you for your persistence in getting stares upward.

    Kind regards

    ... Patrick

Maybe you are looking for