HP LASERJET PRO m277DW mfp: Printers Multifunction LASERJET PRO m277dw WARNIN CARTRIDGE NOT RECOGNIZED PROBLEM

Similar Questions

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A300 PSAJ1E: Touchpad not recognized using Win XP SP2

  Hi all

  I just got a Satellite Pro A300 PSAJ1E, which is preloaded with Vista. It is also comes with a 'product' XP SP2 recovery CD I had to use because of some software work with Vista compatibility issues.

  Unfortunately, everything works well except the Touchpad, which is not recognized by XP at all (without entries, error or not, in the Device Manager).
  The "Recovery" of XP CD installed the drivers of the Alps and the Toshiba Touchpad utility (for turning on and outside), so it seems that it is supposed to work.

  It is activated in the BIOS (which I have also flashed to the latest version, just in case) and is enabled in the software. I also rebuilt the laptop using the "Recovery" CD (the touchpad is not also recognized by starting on the CD "Recovery" which I guess uses WinPE).

  It does not work on Vista, so it shouldn't be a hardware problem.

  Someone at - it ideas?

  Thanks in advance.

  Andy

  Hey Buddy

  Well in your case I would recommend going to the Device Manager and remove the touchpad in the list of devices.

  Then visit the European driver Toshiba page, choose your model of laptop, Win XP OS and download the driver for the Alps Electric and Synaptics touchpad.

  Install both drivers, reboot the laptop and check if your touchpad will work correctly.

  Good luck

• Upgrade of RAM in my Satellite Pro A100 (PSAA3E) was not recognized.

  I have a Pro A100 (PSAA3E) with only 512 MB of RAM.

  I added another identical stick but only 1 has been recognized.
  Each stick is recognised individually in each slot, but never as a 1 GB together. Thus, the two sticks are ok and two slots are okay!

  How can I remedy so that both are recognized?

  Did you use one that is recommended by Toshiba?
  Seems the two modules aren't compatible together hmmm seems very strange.

  How you did upgrade the memory?
  You must disconnect all cables and remove the battery. Then install the memory modules and enter the BIOS. There, you should check if the memory has been increased and set the default BIOS. Don t forget to safe settings!

  Good luck

• Logic pro 9 serial number not recognized on the new mac. How can I solve this problem?

  Hello, I have a version of Logic Pro 9 I am trying to install on my new mac with El Capitan,

  When I enter the serial number on the back of my copy it invalid sys.

  How can this be?

  Thank you!

  Was it a (boxed DVD) version upgrade?

• My OfficeJet Pro 8600 more returns "not recognized computer" when I scan from desktop computers.

  My 8600 OJPro more has been configured to recognize my Dell computer.  What settings should I on my computer for the printer OfficeJet Pro 8600 more allow scanning from my Dell desktop?

  I would try to run printing HP and doctor Scan first to see if the problem can be solved with this automated tool.  Click here to access the tool.

  Thus, there are measures to check the WIA service:

  (1) type services.msc in the section run or search programs and files

  (2) scroll the WIA: Acquisition of Image Windows service

  (3) to ensure that this service is running.  Click on stop, and then restart to ensure that the service is running properly

  (4) restart the PC to see if WIA will resume functionality

  (5) check the properties (right click on WIA) 2 dependencies are defined

  (6) check to make sure that the remote procedure call (RPC) is running

  (7) check the detection equipment core and make sure that this forum works

  Let me know how it goes.

• Satellite Pro L10: USB device not recognized

  Hi all
  need help on this one. Any USB device connected to one of the USB Ports on the laptop comes with a "unrecognized USB device. One of the USB devices to the computer failed error message". Running WXP SP2 and all updates.

  Any ideas how to get around this?

  Concerning

  Hello

  How devices connect and what devices are connected to the USB ports?
  However, try this:

  Unplug ALL USB device.
  Open the Device Manager.
  View, show hidden devices.
  Uninstall all devices under USB controllers.
  Uninstall all devices in storage Volumes. Say no to all reboot prompts until you are finished. In addition, if a storage Volume doesn't uninstall, ignore her and move on to the next.
  If you have a yellow? with unknown devices, uninstall all of the entries there as well.

  When finished, reboot TWICE.
  Reconnect the USB devices and see if they are properly recognized.

• Satellite Pro U300 - CD DRIVE NOT RECOGNIZED IN MY COMPUTER

  My cd/dvd drive is no longer recognized in my computer. It seems to be working, opens and closes and seeing little flashes when I put in a disc. but the disc does not load and the hard drive is not available in 'computer '.

  Ive tried the Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come. Ive also tried the microsoft help forum, and their suggestion didn't help either.

  Any ideas?

  > Ive tried Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come.
  Have you checked if the drive is listed in the BIOS?
  Check this please.

  I thought is might be only a registry key problem, but if the drive is not listed in Device Manager, if the BIOS does not recognize the CD/DVD drive, then a hardware malfunction could be possible

• OfficeJet Pro 8500 a: ADF not recognized in the scanning window

  I had to reinstall my 8500 and the ADF show up as an option in the HP scan window. The charger works in copy mode. I reinstalled using the original disk shipped with the printer and have also tried to download the software and latest drivers.

  Scanner works fine using the glass, but I can't use the ADF. I uninstalled the printer and reinstalled several times.

  Any ideas?

  Hello
  
  Thank you for using the HP Forums.

  You can try this alternative software:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Make sure that when you scan, the 'Source' is selected as 'Use if loaded document feeder' using the ADF.
  
  Let us know if it works.

• Satellite Pro L10: AC/battery not recognized

  Hello

  Currently, when I have my laptop connected to the AC supply cable, the battery symbol in the taskbar at the bottom right of the screen flashes, switching between the battery icon and the network icon. While this is happening if I type some of my keys are not saved and the mouse gets 'juddery '. If I pull the cable tight against where it connects to the laptop, it remains plugged into mains. This happens sporadically and sometimes (rarely) is ok.

  Does anyone have any idea why this might happen? I had the laptop for about 2 1/2 years, so, naturally, that the battery died a little. Not sure it's the battery or cable it charges normally when the laptop is over/under voltage off before.

  Thanks for any info!

  > Anyone has any idea why this might happen?
  Maybe it s a contact drop between the power adapter and the power outlet

  But it's really not easy to tell without touching the laptop.
  I think the laptop technicians could check it and would be able to bring an answer what's exactly wrong.

  But in my opinion it s a soft seal.

  Best regards

• I'm trying to connect my new ipad to my officejet pro 8500 has more. not recognized by the ipad.

  message from the iPad: no AirPrint printer found.

  RFE, make sure that bluetooth is off when you try to use airprint. Bluetooth has been called to interfere with AirPrint. Then, download the latest updates from the HP product:

   

• Printers Multifunction LaserJet pro CM1415fnw does not print in color.

  I have a hp pro cm1415fnw mfp laser jet in my office who does not want to print in color. I have a windows xp. Whenever I try to print in color out of windows from microsoft or the internet the picture comes out all black and not in color. When I print a diagnostics page it prints in color, however. I need help.

  Hi RicherdAC24,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Laserjet CM1415 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  6 download the drivers and full software functionality, and then reinstall the printer.

• HP Laserjet Pro M201dw: "then I explained the problem to management and they said not to buy all the HP printers more."

  Our two new printers Laserjet Pro M201dw are not recognized on the office network.   I have spent hours trying to understand this and posted questions on the forum Support HP, but without response. They became more disadvantages than thay are worth.  And that's enough.  Then I explained the problem to management and they said 'don't buy it not all HP printers more.'

  Thanks for the suggestions.

  I tried to BootP and disable ipv6 on a printer and at first, it worked (finally).  But then, after having unplugged and restarted, he returned to the ip address of connection no.

  So finally, I noticed and changed the setting of the link of "Automatic" to '100TX' speed full - and that seems to have solved the problem of intermittency.  I've converted and turn it back on, unplugged, etc., and it maintains the connection and ip address.

  Do not want to play with something that works, I can't say with certainty if the speed of one link would have solved the problem (probably not), but it seems that while your excellent suggestions finally established a network connection, the setting of explicit link speed was necessary to maintain the connection.

  Thanks for your help in this matter!

• Windows 8 Solutions for Laserjet, MFP printers, all-in-One and Scanjets

  To help customers to use their products with Windows 8 successfully, HP has identified the drivers recommended by product. Please see the following support documents for more information:

   

  LaserJet - printers, multifunction and all-in-one devices supported in Windows 8

  LaserJet and Color LaserJet - produced with care delayed in Windows 8

  ScanJet - Scanners supported in Windows 8

  LaserJet and Color LaserJet - printers, taken in charge or with limited Windows 8 Support

  LaserJet Color LaserJet and LaserJet AiOs/Multifunction - products not supported in Windows 8

  If you have a problem with the installation of your printer from Windows 8, please start a new thread and include your printer in the title of your post. Please, do not respond to this post. As new help documents are available, they will be posted on this subject.

  If the resources above do not meet your needs/questions or you need additional assistance, please visit:

  Additional resources that are available to help customers with their LaserJet printers, multifunction and all-in-one include:

  HP LaserJet and multifunction and each Color LaserJet - printers install the driver included in Windows 8 or Windows Update