HP LJ 400 M475: close the network open a printer

My HP LJ 400 M475 shows as an open on my LAN network is there any way I can close or secure this network? Any help would be greatly appreciated.

You have Direct wireless enabled in the printer.  Disable wireless directly into the printer.   Connect your printer to your router's SSID.  Don't hide your SSID routers.

Tags: HP Printers

Similar Questions

  • Close the network card?

    I have a machine that I have leveled off for XP Pro SP3 because I have a few HW record that ONLY works on XP.

    I want comtrol machine including = WOL WakeOnLAN remotely.

    I had an old IBM Thinkcenter used for recording HW, but I want a bit more powerful machine of Noah - let's call it MC.

    The MC has been running Windows 7 before but now ranked out of XP Pro SP3 and it works fine - with the exception of WOL installation.

    I simply does not work and I see that the network adapter is SHUT OFF when the machine is turned off - the old IBM ThinkCenter I can always see the LED light when it is turned off.

    I beleave there are new drivers for the network card, but I checked the settings on the parameters WOL and I did also the settings in the BIOS.

    Still no light in the LED on the back of the RJ45 of computers. Also I see no light on the swichport where the MC cable is inserted into the switch.

    It is on the Ethernet card on board and it is a NVIDIA nForce 10/100/1000 Mbps Ethernet with "drivers".

    What can be wrong here and how I can fix the problem?

    You may have read my first post that I deleted later because I had completely misread your post before responding.  As I said then, Wake on Lan is controlled by the motherboard and firmware of the NETWORK adapter, it is not dependent on the operating system, a compatible computer without any OS installed WOL can be started by WOL providing that it is properly enabled in the BIOS and NETWORK card firmware.   Windows (or other operating system) really has nothing as such to do with function Wake on Lan, the extent to which any OS with WOL is limited because it can enable the feature in the firmware of the NETWORK adapter through the drivers or other utilities provided by the manufacturer of the device.  If it worked before then you know that the computer is able to do, was not because Windows 7 has been installed, it worked because it has been correctly configured in the firmware of the NETWORK adapter and the BIOS.  When you installed Windows XP it is most likely did not have the drivers for the NETWORK card and it may have reset the NIC to default settings that cannot be reset correctly with the drivers you have installed later.  Have you installed the card mother/chipset drivers?  They may be needed for other drivers work correctly.

    Wake on Lan has everything to do with the BIOS, it is implemented by the motherboard.  If your computer is capable of WOL (which we know that it is) there is an option for it in the BIOS, it might be under a different name, like "Power Up on PCI device" or something else.  If you don't see a power management Option in the BIOS, it might be in the advanced settings, it's there somewhere.  If Windows can have changed WOL BIOS settings during installation is something that I don't know, but I can tell you that Windows can change some settings in the BIOS, you can adjust the timers BIOS to start the computer at scheduled time so who knows what he might be able to change.

    John

  • How to "go to a page in another document" without close the currently open document?

    I created a form that uses a button to switch to another pdf document. This second document is included in the first document as an attachment so that the whole package can be sent to people in a single document.

    It works well but the problem is that when the button is selected the document that is already open is closed (albeit with a backup invites document).

    There seems to be no way to keep the existing document open, while the second document (the linked document) is open.

    Is there a solution to this?

    Go to the properties of the button and change the action "go to a page view".

    you have created. The option "open in" Edit and put to 'new window '.

  • My XP laptop sees the officejet 6500 on the network but cannot print on it.

    The diagnostic says HP drivers print program are not installed, but they are. My office windows 7 print very well.

    Hello

    Thanks for posting,

    In order to solve the problem, please check the IP address of the printer and then back to the computer and open the browser. In the address bar eenter, IP address of the printer and click GO or press ENTER. If the XP computer and the printer are connected to the same network, the printer page opens.

    If the printer pages opens, please close the browser and click on start and click on printers and faxes or click on the control panel and click on printers and faxes. In the fax and printers, window, please right click on the printer icon and click Cancel all documents. Right-click on the printer icon, and then click Properties. In the Properties window, please click the ports tab and click Add port and select Stanard TCP/IP port and click New Port. This will launch the TCP/IP Wizard, click Next and in the printer name or IP address, enter the IP address of the printer and click Next and follow the on-screen instructions and click Finish. Click on apply, and then click OK in the printer properties window. Then try to print and check.

  • NOT FOUND ON THE NETWORK BUT E-PRINT HP7500A WORKS OK

    Hello

    I have an OFFICEJET 7500 a printer.

    This is related to my network without any problem on the printer wireless network page.

    Can I use e-print by sending an email to the printer and it prints ok.

    However, I can't print on my netwrk House to her. The mistake of the printer is unable to connect to the printer. Also when typing the IP address in a browser, it is not found. The hp network diagnostic tool also can not find.

    I tried resetting it, it works, reconnect to the network switch but nothing seems to work.

    When I installed first, everything was ok, it was two days ago. Now the only way to print is to send an email - please help.

    Thank you

    Hi The_Bandit_05,

    Follow the steps in the document at the link below. Let me know what you find?

    The information contained in this document pertains to HP products that have already been set up and configured for wireless and work wireless for quite awhile. This document contains information on the possible causes of an interruption of the wireless connection, tips to avoid the problem and the General troubleshooting steps to help you re-establish the connection Wireless on your HP product.

    Printer keeps no connection Wi - Fi

  • Photosmart HP 7520 use ePrint app on iPad - eliminate others on the network to use printer

    Other than 'parental control' how can I prevent other users on the network wireless in the House to use my printer? Darling always leaves the empty box, and it has a perfectly well connected printer to his office on the ground floor computer. He is too lazy to the control modules. I would have preferred that he did not know that I blocked him.

    Thanks for any help!

    Hi beckys2000,

    I see that you have a printer additional use you want to control, unfortunately, there is nothing that I can locate in the printers setting you will discreetly or other wise, place the printer on lock down.

    You can however, if you have your dear credit card, order ink directly from your HP ePrint App on your iPad. Tap the SureSupply icon at the bottom of the home page, follow the first installation and choose the best deal on ink.

    I know that this is not the perfect answer, but at least once inks arrive, you get your printer to your self again.

  • How to map the network folder or printer driver automatically on the PC field when first time login

    Hello

    I'm looking for the procedure map the network folder or a printer driver automatically on the PC field when the first connection via Active Directory.

    I have already created batch files for installing the driver mapping and network printers, but I do not know how to apply to all users in the domain.

    I use Windows server 2012 R2 and client PCs running Windows 7 and 8.

    Please give me some advice.

    Thank you

    Hi Avocado,

    According to the description, your computer is connected to a domain network that includes various policies that govern your system and can affect the basic operation of a stand-alone system. So, I suggest you to post your query on the TechNet forum for best expertise on this issue.

    All the best!

  • How to close the tabs open on android mobile phone?

    I can't access any glasses that I ran out of legs but don't know how to close tabs if no x on the screen. How can I do?

    Next to the address bar is an icon that looks like a stack of paper with a number on it. If you type who, a list of the tabs and you can press the x to close those that you no longer need.

    Does it work?

  • Close the network on my time machine

    I recently started to use AT & T Uverse to my wireless network, but my old my mac time machine network is still high and confusing devices in my house. I always use time machine for backup, but no ethernet cable is currently not attached (new modem ATT in a different room from the computer). How to stop the old network on my time Machine? I use Mac OS 10.10.5 and utility Airport 6.3.5.

    Duncanj1224

    It's a simple matter to turn off wireless on the Time Capsule.

    The problem with that is that backups Time Machine will not officially supported... and may not work at all.

    You want to try this anyway?   We will not be able to help you if you could create problems.

  • Printer connected to the network, MG5320 will print without mac fault but not with windows 7

    Canon MG5320 printer works great and I am able to print wirlessly of my mac mini which is 3 rooms away from the printer, but my windows 7 laptop is right next to the printer can print only if USB is connected and not wireless. I recently tried to separate the printer and the computer laptop windows 7, placing the printer rooms 2 far but the custom still pc wireless printing. I don't know what to do now?

    Hello smiles917.

    It may be possible that the Windows 7 computer is configured to use the USB port and not on the wireless connection.

    Uninstall and reinstall the drivers should fix this problem.  Please, perform the following steps:

    1. open the control panel from your desktop or the Start Menu.

    2. open programs and features.

    3 uninstall the drivers MG5300/MP and the Canon IJ Network Tool.

    4. close all open windows.

    Once this has been done, please visit our Web site at the following address to download and install the latest driver for MP for Windows 7.

    http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg5320#D...

  • J4680 are visible on the network but not printing/scanning

    Everything I describe works very well for 2 years...

    The J4680 is/has been connected wireless to my home network.

    My daughter printed something and it came out blurry.  I tried to copy something to see if it was the printer and it came out very well so I did a calibration using the Tools menu of the printer.  The printer print the calibration page, but he complained that he couldn't find a calibration page when the time came to do the scan of the calibration page.  Yet once, I tried to use it as a copier and it works perfectly.  Since then, I can't print or scan to this printer on any computer in the House.  Client computers run a mix of XP, Vista and Win7.  HP Diagnostics (in the plural) I have downloaded all show the connected printer and works correctly, but still no printing.

    I connect to my router and you can see the printer connected as a DHCP client using 192.168.15.1.  I can open a browser, connect to this IP address and have access to the printer.  He sees the ink level and shows the status of the printer such as "processing job".  Open HP Solution Center shows the printer as "offline".

    I rebooted the printer and all the computers in the House... not to go. I restarted the router... no go.

    I reinstalled the software solution Center and it is printed once, but when I tried to scan, it does not and it was not printed or scanned again since.  I tried doing the calibration thing and still get the same message.

    I'm at my wit's end.  Help?

    OK, let's remove the cartridges, clean the electrical contacts (small 1/16 "points on the cartridge and corresponding to those inside the printer.  Use a damp lint.  The fabric will be destroyed with ink.

    Now, try it.  If who disobeys, the driver on your computer using "clean cartridges".  If this does not work, you may have a faulty cartridge (probably color).

  • El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

    How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • How can I stop Firefox closes when I close the last window open?

    I had to get Windows 7 reloaded and my backup was corrupted (i.e., I couldn't use my custom Firefox.) So I downloaded the new Firefox and now it closes automatically when I close the last window opened. I prefer that Firefox stay open until I chose to close it. How to achieve this?

    Hello 1DKG, do you mean when you close the last open tab? If yes you can replace it as follows:
    enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.tabs.closeWindowWithLastTab. Double-click it and change its value to false.

  • Close the HyperTerminal Application using LabVIEW

    I have a client who wants to LabVIEW to close the HyperTerminal Application automatically is the serial port open.

    It is easy to detect that the serial port is already in use.  I already have a popup that tells the operator to close any application communication because the port is already in use; However, they want to do it automatically.

    HyperTerminal is not taken support ActiveX, and they will not go to the version more professional who does.

    For a long time, I had read a thread where it was possible to close (or open)? and demand having no ActiveX support.  I expect to use similar approach...  Opening the app is simple, but closure is another story.  You need some sort of reference to this request to tell Windows that are to close.  The Win - XP operating system.

    Suggestions are welcome.

    R

    http://www.howtogeek.com/HOWTO/Windows/kill-processes-from-the-Windows-command-line/

    OR

    Taskkill (command line as well) http://technet.microsoft.com/en-us/library/bb491009.aspx

    Taskkill /IM hyperterm.exe

    kill hyperterm all windows open, BUT it will ask you if you want to close the sessions open, which I think that you do not want.

    Taskkill /F /IM hyperterm.exe

    voila (without chewing the com port, I just tried)

  • Unable to connect to the network via a wireless connection.

    cannot connect to a wireless network adapter not connected

    can get Wi - Fi adapters

    Hello

    Do you have any software installed on your computer network monitoring?

    Monitor mode, or RFMON (Radio frequency monitor), allows a computer with a NIC (NIC) to monitor all traffic received from the wireless network. Unlike promiscuous mode, which is also used for packet sniffing, monitor mode allows packets to capture without having to associate with a network access point or ad - hoc first. Surveillance mode applies only to wireless networks, while "Promiscuous" mode can be used on cable networks and wireless. Surveillance mode is one of the six modes of 802.11 wireless cards can function in: Master (acting as an access point), Managed (client, also known as station), Ad - hoc mode, mesh, Repeater, and monitor.

    Limits

    Usually, the wireless adapter is unable to transmit in monitor mode and is limited to a single wireless channel, if it depends on the driver of the wireless card, its firmware and features of all of his chip. In addition, in monitor mode, the adapter does not check to see if the control of cyclic redundancy check (CRC) are correct for packets captured, then some captured packets is maybe damaged.

    If a network monitoring program is running on your computer, the wireless network adapter will be set to follow the fashion, which prevents Windows to connect to wireless networks.

    To connect to a wireless network, close the network monitoring program, or follow the instructions in the program to exit the monitor mode.

    Solve problems, find wireless networks
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Let us know if this helps

    Concerning
    Anthony

Maybe you are looking for

  • New construction system. Need help!

    I have a HP Pavilion Media Center TV Desktop - GC673AA #ABA m8100n with a broken motherboard. I want to build a new system of hp no . My question is: what are the parts of the my old hp system, can I use to build the new system without compatibility

  • Auto tone DEVELOPMENT

    Hello recently when I pass with a photo of the library mode to development mode the picture is immediately processed by lightroom with auto button whereas before I did it manually. I can't remove this setting.

  • Facing a problem with writing the custom for WLS identity assertion provider

    I am facing a problem with writing the custom for WLS identity assertion provider.Requirement:Asserter identity configured in WLS should get called when the following cookie is sent in a request by my applicationcookie name: OAMAuthnCookie_blr1234567

  • With respect to the analysis and collection of statistics

    HelloWhy the collection of statistics is necessary in the DB?Thank you

  • Creating a book of poem/story in InDesign

    HelloI normally work from layout simple but got a multiple page layout project in and wanted to ask for some advice.Project:-65 page Word doc being transformed into related coverage probably sweet, printed professionally book-customer not sure of the