HP M276NW help for scanning of 35mm negatives

How to scan 35mm film with this Scanner?

What is software?

¯­¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
MVP (Windows Expert-consumer)

Hello

Since the following manuals, I don't see this option:

http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=5097654

the guide online:

http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03350812-8

nothing is mentioned in the following comments:

http://tech.firstpost.com/reviews/HP-LaserJet-Pro-200-color-MFP-m276nw-review-51667.html

Kind regards.

Tags: HP Printers

Similar Questions

  • A 35mm negative scanning

    I have a scanner/printer C4200 All In One.  I can scan a negative in a 35mm image?  If so how is this possible?

    Thank you.

    Hi c808,.

    Welcome to the HP Forums!

    I see you're wondering if you can scan a 35mm negative in an image with your HP Photosmart c4200.

    There is a technical reason for this problem. The 35mm negatives require a light above the document to shine through the material.  All-in-One scanners use a light below to reflect the image.

    Hope that answers your question and have a nice day!

  • 35mm negative scanning?

    Hello.  I recently bought a Canon Printer/Scanner opportunity hoping to digitize my 35mm negatives and work with them in Lightroom.  I imported after scanning at 300 dpi (high resolution that I can scan with), but the files are too small in LR.  I am unable to get them to a regular size photo.

    In addition, the scanned negatives are a bit dark.  Also, should I put a white screen on top of the negative during the scan?  I'll do some research in the meantime.  THX.

    Yes, it's good enough for the digitization of printed things. But as you noted, scanning of negatives does not produce an image large enough to do much with. The DPI setting really has nothing to do with the quality as much as it affects the size of the final image. If you can find a way to scan your negatives 2400 dpi, you will find that your images will be quite large so that you can work with them. The image itself will not be 300 dpi. The image will simply be the pixel dimensions. And the definition of the DPI is what affects the size of the image will be in pixels.

    After looking at the description for your printer/scanner, I don't think he has the ability to scan negatives. I now understand what you thought putting a sheet of paper on the negative. But that's not really going to help. If you want to scan negatives and slides, you need to do a scanner that is designed to do. This normally involves having things built into the lid of the scanner. I could be wrong, but I do not.

    I guess what I'm trying to say is that if you want to scan negatives and possibly slide, it would be necessary for you to have a scanner that has the built-in capability. A typical scanner you have does not have this capability.

  • C6250: scanning of 35mm film

    I've had this printer for a couple of years (at least!) and never had need to scan color negs photo. Now I'm back into photography and am interested in scanning and printing my own negatives.

    This machine (the C6250) can do that? If not, can anyone recommend a printer/scanner/copier that has this capability?

    Hello flylooper1943,

    The printer does not support the scanning of 35mm film.

    Please click hereto find the specifications.

  • HP Officejet Pro 6830: Model documents issued by the intermediary for scanning

    When I insert a document in the toploader, the document is not sucked through for scanning, the scanner scans just a blank document.

    Hello

    Thank you for using the forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308#Z7_3054ICK0K8UDA0AQC11TA930C7

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    An example of using the ADF as the source is indicated below:

    Hope that helps.

  • No option for "Scan to Computer" Lion mountain on Mac

    I installed the latest drivers from "full functionality" for my Officejet Premium 8600, v12.23.0.

    I'm running OS X 10.8.2 (Mountain Lion).

    I want to be able to scan directly from the printer to my laptop, using the function "Scan to Computer".  However, when I open the HP utility, I see no option for "Scan to Computer" in scanning settings.  I don't see options for 'Scan to email' and "Scan to Network Folder".

    In the search of these forums, only suggestions that I found are to install the full featured of the printer drivers, I have already done.

    Many thanks in advance for any help!

    -Nate

    Click your desktop, then click on the menu to go to the top and select Applications you should see the Hewlett-Packard folder.

    If you do not see such a folder, run the installation once more, make sure you check the HP recommended software during the progress of the installation...

  • Photosmart 309 a - Director HP used for scanning

    I just got a new computer which uses Windows 8. I have always my photosmart 309 love and often use it for scanning and an occasional fax. I have always used the Hp Director to set up my scans. I see that this is no longer an option. Is there another program I can use, or am I out of luck?

    Hi there, Michele

    You can try to uninstall the printer software (from the control panel), then by restarting your computer and download and reinstall the printer using the same link I posted above.

    That should help the printer freshly and correctly on your computer.

    Good luck

  • Can I feed paper manually at the top of my HP Laserjet 3050 or is this slot just for scanning?

    I'm trying to print an endorsement on the back of a cheque.  Can I feed paper from the bin to the top of the page where you are scanning from where is - this just for scanning.

    MorningCall, the scanner has the function of copies/scans only and can not transfer text on the control.

    I hope this helps!

  • Where can I find help for tools > Web Developer?

    I'm helping a friend change his web site. Where can I find help for the Tools menu > Web Developer?

    Specifically, I need to find where I can edit the HTML code, preferably in a WYSIWYG environment (that is, not laced with HTML tags), then how can I save the new file (s).

    Firefox does not have a built-in html WYSIWYG editor. You can download an html editor, based on the Mozilla code as Firefox, free like KompoZer or BlueGriffon.

    http://KompoZer.NET/

    http://BlueGriffon.org/

  • 14 inches: help for laptop

    I was using my laptop when it is off. Now all I get when it starts is hp and swirling points. Tried to take the battery and now the button. Nothing seems to work.   Can anyone help please.

    The hard drive has failed and needs to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

    If you need help for selection/replacement of the hdd post back with the complete model & product number as indicated on the Service tag on the bottom of the laptop.

    How can I find my model number or product number

  • There is no help for the usrp blocks screens

    For power, where are the docs for help for the USRP & USRP related blocks (host side & lvfpga blocks)? Help is dimmed in the menus. If they came with the driver, they should be grouped in with something not obvious & has not installed. Where are they?

    BTW, I use NU-USRP 15.00.

    Thank you.

    apchar,

    Try to use context-sensitive help on the pilot of the USRP RIO screw Either click on the "?" in the upper right corner of the block diagram, or press Ctrl-H and hover over the screws of RIO USRP. You should see the additional help documentation.

  • Context-sensitive help for objects on the tabs (bug?)

    If a command or the indicator is on a tab, the context-sensitive help for that apparently no longer works. It's particularly embarrassing for clusters of complicated example.

    Is there a workaround I'm mising?

    Example: This is the context for a cluster (A) and for the same cluster help when placed on a tab of the control (B). Case B is obviously completely useless.

    Hi Altenbach,

    It is true that it is not fixed for 2009.  I checked the condition of the CAR and it does not just he makes to the 2009 version.  It is always open and it looks like they still want to fix in the future, but no guarantee on which version.

  • Need help for optical safety circuit.

    I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

    I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

    I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

    Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

    Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

    I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

    I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

    The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

    There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

    Lynn

  • I need help for the upgrade of my current system.

    I need help for the upgrade of my current system.

    I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

    I want to make the larger environment using the following:

    (1) apply Virtualization

    (2) apply to the failover process (clustering)

    "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

    Storage 4) that supports Raid (1 and 5)

    UTM excellent 6) that supports (SSL VPN, VPN Global)

    suitable backup solution 7)

    (8) good antivirus for clients

    my questions:

    (1) can you provide me with a good design for this environment

    (2) should I choose what operating system:

    Microsoft datacenter or company

    I know datacenter provide us the unlimited VM but needs per processor license

    so if I have two Grouped servers I want to buy 4 licenses

    and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

    (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

    (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

    (5) what about win2k8 license for VM:

    lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

    (6) can I use backExec license for SBS with windows 2008 standard

    (7) who better to virtualization AMD or INTEL

    (8) hyper V or VMware?

    (9) what of Microsoft data protection Manager... is this good?

    (10) what virtual machine manager? What are the benefites keys

    Thanks in advance

    Hello AnasAI,

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • I need help for configuring security for my wireless again.

    Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.

    original title: Wi - Fi Protected Access

    Hi dmcangus,

    See the Microsoft articles below for more information on WPA wireless security.

    Configure Security Wireless WPA for home networks

    http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security

    Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP

    http://support.Microsoft.com/kb/815485

Maybe you are looking for