HP M452dn: Firmware applies to the two drivers?

Similar Questions

• apex5 pre-release - url filter applies to the two IRs with the same column name

  I've implemented 2 interactive reports on the same page, one on EMP (static id Throne) and the other on DEPT (deptir static id). Both the DEPTNO column. If I create the following filter via the URL: IR [throne] EQ_DEPTNO:20, the filter is applied to the two interactive reports.

  

  Hello

  Please let us know. It has the same root cause as your other reported problem. It's bug #20764255, which has already been identified and corrected on our development environment. A fix will be released in our production release.

  Concerning

  Patrick

  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com

  APEX Plug-Ins: http://apex.oracle.com/plugins

  Twitter: http://www.twitter.com/patrickwolf

• Do I need two drivers Synaptics & ALPS to get the touchpad working?

  It Somethere I read for touch pad works perfectly it must be instaled Synaptics (the one I need for mine) and the ALPS.

  I was curios that is false information or it works?

  Hi mate ;)

  In my opinion, you should install always two drivers.

  More information, driver page Toshiba said:

  Jagoda86 _Alps - this driver allows you to set the properties and functions of mouse control.
  _Synaptics_ - this driver allows you to set the properties and the touch pad control functions.

  I assume that you need two drivers for all functions, which can be changed in the settings of the touchpad.

  If you want you can try to install only one of the two pilots, and then to verify that the settings are not available or that lack exactly.

  See you soon

• My drivers optical dvd rw disappeared two identical - poster Device Manager! mark beside the two circles in yellow

  Yes I know I'm a dinasauer still under kind of WinXp Pro Home edition use it - my burner gone--not recognized by my computer - I checked the Device Manager, they are there, but the two identical optical dvd rw drives have a! Mark surrounded both in yellow that I restored the system when I had a player that nothing changed - Help! Looks like I need some drivers, but I thought that windows would have covered them in case of default?

  Hello

  1. What is the exact error message you are getting?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• a router and a modem to connect together, but the computer said two drivers

  I want to get my wireless to the top quick cuz his bull press

  Hello

  We really need more information and description of the problem other your wireless network does not work.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ----------------------------------------------

  Cable or another modem - router - wireless connection on computer?

  Restart the computer to clear any corruption.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  Also check with the site of the manufacturer of your router because they generally excellent help on the spot.

  ============================================

  To solve the problems of the network:

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I have
  would update your WiFi drivers on computers. How you are positioned in the router?
  Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
  stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If Windows Update suggests a just HIDE
  because they are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
  DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can we apply a createInsert single button for the two master form, details of Table?

  Mr President.

  Can we apply a createInsert single button for the two master form, details of Table?

  I want to just click a button and fields are available in form-Master and details-table.

  As below

  

  Concerning

  Mr President.

  My worm jdev is 12 c

  And I can do your job for you.

  His code

  For any organization that wants to do this job

   public void createVoucherAndVDetailsRow(){
              VoucherViewImpl voucherVO=this.getVoucherView1();
              VoucherViewRowImpl row=(VoucherViewRowImpl)voucherVO.createRow();
              voucherVO.insertRow(row);
              RowIterator iterator= row.getVoucherdetView();
              String voucherNumber=row.getVoucherId();
              NameValuePairs nvps=new NameValuePairs();
              nvps.setAttribute("VoucherId", voucherNumber);
              VoucherdetViewRowImpl voucherdetRow=(VoucherdetViewRowImpl)iterator.createAndInitRow(nvps);
              iterator.insertRow(voucherdetRow);
              }
  

  Concerning

• How do you apply Blur to only one of the two duplicate layers?

  Hello everyone

  I have two layers of dynamic object to a panoramic photo, which is a duplicate of the other and returned vertically.

  I would like to apply Blur to the inverted layer, so this step appears as a reflection of the other layer.

  However, when I apply the blur to the image reversed in its .psb document window, the blur effect ends on the two layers.

  Why the blur apply to two separate smart objects and how could possibly apply Blur to only one of the two double layers?

  Please advise me.

  Thanks as always,

  EAD

  Even if you see two separate layers, Photoshop is not to see them in the same way. When you using duplicated layer (Ctrl/Cmd + J) command, which tells Photoshop to create clones SO double layer sets SO. Update content on one of the 2 cloned layers will take into account changes to another. As you modify the content of a layer of cloned SO that change is automatically reflected in the other. As noted above, the solution is mentioned to apply the blur as a dynamic filter without changing the content (do not double click on layer SO): with SO layer selected in the layers panel, go to filter > blur > Gaussian blur.

  To cite only in case you need this option: you can duplicate the layer SO without cloning to help: command of new dynamic through copy object . In this case you can apply changes to the .psb file you make and modifications will not reflect to another (parent) layer of SO. In this case, disadvantage is that you can't quickly Exchange content on the two SO layers when creating clones SO you can overlay.

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• CD/DVD drives not working only not on the two PC running Vista, heeeeeelp!

  Hi guys, two PCs, which is new, both running Vista decided that the installed CD/DVD readers shouldn't work!

  The new PC reads a CD/DVD when inserted (lamps flash to recognize this is something), then nothing (Autoplay is configured to use iTunes ) so I'm going to, click on 'Computer' on the disc, and he says "insert a disc into the DVD drive (f) "

  So, I installed the MS auto fix jobbie and it says ' insert readable media...» "I've had (several store bought CD and DVD all failed to save) then I tried to search the upper and lower filter using regedit, but there is no file with this name in the folder on the drive.

  Device Manager indicates that drivers are up to date, and the device does not work, even though I have many distinguishing!

  Apparently, it is specific to Vista, but suggested courses of action left me with an even worse urge to kick the bloody things around the House that I had when I tried to play the CD in the first place, any help from you lovely people would be most appreciated. Thank you, James :)

  Hello

  If you have too many programs loading CD/DVD they can collide with each other as they
  competition for resources. These will be workload often pieces of themselves in memory at startup
  so it will have an effect, even if not to use. If you have installed some of these
  lately trying to uninstall it to see if it has an impact.

  --------------------------------------------------------------------------------------------------------

  This troubleshooting help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Headphone Jack, not to let the two devices at the same time - work Realtek problem - Dell Audio is unusable

  A copy of my post TomsHardware, where no one was trying to help:

  "To begin with, no thread any where online have solved my problem. My problem in the simplest possible terms:

  -J' bought a Razer right headphone, it does not work when it is connected.

  -J' spent the next 4 hours of downloading, re - download, install, uninstall and reinstall the Realtek drivers, because everybody says I had allow a setting or a related subcontractors as struggling separate devices or something, and I do not have the Realtek HD GUI; at least, I don't think so...

  - Then I discovered that Dell has decided to replace GUI from Realtek with "Dell Audio", which had two options, one of them being that it should even display settings or not.

  -J' took a few steps in Dell Community site and spent the Realtek driver with the Microsoft driver, and that got the headset to work.

  -My headset works fine, but the microphone is not yet detected.

  What I have relevance: right Razer headphones + microphone detachable; Dell Inspiron 15 w / only, audio unified; each unique Realtek and Microsoft audio driver compatible with Windows 8.1.

  What I don't have: the Realtek audio Manager.

  What I wish I had not: Audio from Dell.

  Someone please help me on this, because I have just fired over $100 for it, and I intend to use it for professional players and podcasting; no microphone is not cut it.

  Sorry if I look really angry at the moment, but I think we've all been there...

  Thank you. »

  The main issue: there is a definition of Realtek Audio Dell only exists to ban, I need to change that. I need to configure it to allow two different devices to use in the same decision, and Audio Dell replaced Realtek GUI with its own, which is pretty... Pretty useless. The two parameters, as there, one of them is "Show advanced settings", so congratulations to anyone who decided to do this monstrosity.

  EveryNameWasTaken

  Every post that I found online said that the Realtek HD GUI is the way to go

  Since you can't have the DD Realtek Audio Manager in a Dell, one wonders how they determined it was the answer.

  EveryNameWasTaken

  I just need a way to access

  My question is how to get all these other people. I think that probably they were not talking Dell laptops and their solution applies to some other manufacturers products.

  EveryNameWasTaken

  Please provide another way to separate input devices that are entered into the same outlet

  A headset devices are already separated in the properties. A helmet is an input device, microphone, which can be set as the default device in the properties (Control Panel > sound > recording tab > micro). It is for the internal microphone until an external microphone is connected. The other part of the headset, the headset is governed by sounds > playback > speakers. Who controls the speakers until the headphones or external speakers are connected.

  EveryNameWasTaken

  Inspiron 15 3542

  Thank you. I wanted to know because a couple of the Realtek drivers have a problem with the headphones or the part headphones headphones. Headphones are recognized by their impedance detection and I think that some of the drivers have their settings come down a little, or too narrow. None of the Realtek for the Inspiron 3542 versions are known to be bad for me, but if you get audio in the headphones using the native driver but not as the pass of the Realtek driver then I feel that the fault is with the Realtek driver. You can see all the drivers that comes from Dell for your model in the Inspiron 15 3542 html page. There is audio for Win7, 8.1 and 10 pilots. "WB" means 8.1 and 'WT' 10. I think that there are 2 of each. Try the two for any operating system you have. (If you have10 which, in itself, could be the problem - other people have said they have started the headphone problems when they installed 10) You should not try to install an older version of the driver on a newer version. First remove the newest one in the control panel.

  EveryNameWasTaken

  It befuddles me that Dell would give us a different GUI that has so few options

  I don't know if Dell Realtek & made that choice for technical reasons or something. I think that some of the laptops did not have the Realtek Manager when Dell has started using Realtek as a supplier, but that changed. Of course no one is happy to have fewer options, but yours is the first post, I've seen that reported to the mic. Many other posters have been unhappy, because Dell's Audio Manager does not provide a way to separately control the volume of the headset which is a problem because they can be much too strong, but the real Realtek Manager has an option to display ' phones as a separate device from the speakers.

  EveryNameWasTaken

  I did not buy a $100 laptop, I bought the headphones for $100

  I thought that you had purchased a used laptop. Some of the older 15 Inspiron are probably pretty cheap now.

  EveryNameWasTaken

  -A system restore will not change anything

  I run a retrieval system to remove windows or configuration problems, but that's just me.

  EveryNameWasTaken

  decision does not have a headphone and microphone with any device I checked

  If the plug does not work with any headphone it either because of the Realtek driver fails detecting the defective hardware or it. You should report to technical support if you have an extended warranty.

  EveryNameWasTaken

  "and I used an adapter USB jack to try my usual Microsoft LifeChat headset).

  Is an adapter USB jack of the same thing that the USB input audio in my previous screenshot? A usb plug avoids the problems of the Realtek combo decision-making because the USB does not use Realtek hardware or driver from Realtek. Headset LifeChat know either, but if they are a usb headset while they should work. USB audio devices are as separate sound cards - each device contains its own audio codec, even the small usb Jack. If a device usb audio does not work, it has nothing to do with the hardware, driver or Realtek Manager.

  EveryNameWasTaken

  Another laptop, an HP G62 old without a grip combo under Windows 7 Ultimate, could run them all very well

  You me lost there. The headphones you have tried in the Inspiron have a single plug for a headset jack (4 segments - TAKING), that looks like this?

  

  and you connected to a microphone jack on a laptop with the separate mic Sockets & normal headset?

  EveryNameWasTaken

  each response that I get from either Razer themselves or now these forums was condescending.

  Your two posts today have assumptions that make it difficult to formulate a convincing answer, but I I don't think I'm condescending. I try to avoid the annoyances that we see in so many forums. However, they are your feelings and you have a right to them.

  When I said to forget taking combo, I wasn't brushing off the problem, while recognizing that these mic combo jack issues are difficult, in large part because we can't use the native driver to test the Realtek driver, so we can't easily determine if it is a driver or a hardware problem. It is much simpler to use usb audio, but as I said I don't know what are the special features are required for your purposes of pod casting.

• Windows 10 can not boot after installing the Bootcamp drivers

  I have an iMac late 2013 (21.5 "), and I just got 10 Windows so that I can install it using bootcamp. I spent a good part of two days trying to get Windows to work with installing bootcamp, but no matter what I do, the result is always the same. If I let bootcamp install its driver (as he wants when you start first in 10 Windows after installation), Windows will crash before loading fully at the next startup. He comes to see the windows logo pop up with the loading circle spinning around for a second, until what the circle all the sudden stops. After that, it restarts and I hear the iMac from sounds (this much quieter time for some reason any) and then it does the same thing. The third time that it restarts, it starts the automatic recovery mode and I get caught for the advanced boot menu. After letting Windows reinstall itself, it works fine except that it lacks some of the display driver (I can't adjust the brightness) and I also can not use the function keys on my apple keyboard, or the magic mouse at all.

  I tried to reinstall OS X El Capitan and then repeat the installation for Windows. I tried with the driver OS X Downloads for me in Bootcamp (version 6.0), and I've also tried using those newer that Apple offers for download on their site (Version 5.1.5769). All attempts of the result of facilities Bootcamp in crash of boot even when Windows is restarted.

  Windows is still usable, I just think it would work as it is supposed for a Mac wish. Why the bootcamp drivers break 10 windows? Has anyone else had a similar problem? If so, any suggestions?

  Thank you

  BC 6.x drivers are more recent and recommended for Windows 10 models 2013 and following.

  BC 5.x drivers are older and meant for W7/W8.1. Specifically, in your case, 5.1.5769 are not valid drivers for your model. iMac 21.5 inch 2013 requires such Software in Support of Boot Camp 5.1.5640 indicated in the installation of Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  Publication date: February 11, 2014

  File size: 925,6 MB

  The system configuration required

  • MacBook Air (11 inches and 13 inches, beginning 2014)
  • MacBook Pro (retina, 13 inch and 15 inch, mid-2014)
  • MacBook Air (11 inches and 13 inches, mid 2013)
  • MacBook Pro (retina, 13 inch and 15 inch, end of 2013)
  • Mac Pro (end 2013)
  • iMac (21.5 inches and 27 inches, end of 2013)
  • Windows 7, Windows 8 and 8.1 of Windows, 64-bit

  It is not a problem of drivers BC. W10 requires updates that it shouldn't. Please see Windows crashing in 10, but know not why. as reference. I suggest that you follow the steps described in the linked discussion and test.

• Bootcamp installs all the Windows drivers?

  Hi, I intend to do Bootcamp on my Mac. I will be installing Windows 7. Before going further, I would like to know if all my Windows drivers will be installed, as they are the last thing I want to worry.

  Windows drivers are installed in two phases. The generic drivers are installed everything first. Apple-specific drivers are installed using the USB flash drive you will create/download help Wizard of BC.

  For detailed steps, see install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 as a reference for a BC Assistant guide.

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.