HP M4555, mailbox 3 bins stapling (CE736A) - does not sort the paper during printing of z/os.

Similar Questions

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• HP Officejet 4622 will not print simple controls because it does not recognize the paper size.

  Product: HP deskjet 4622 All In One

  operating system: Windows 7

  Software used: Quicken Starter Edition 2011

  My printer refuses a single cheque due to the size of the paper being not recognized by the printer. The actual size of the individual audit is 8 1/2 inch wide and 5 1/4 inch from top. There is no size in the settings of the default paper size that matches the paper size... The quicken software print 1, 2 or 3 controls on a sheet so if I print 2 verifies that leavesme with a single cheque that is wasted because my printer does not recognize the size. My previous HP printer did not have this problem.

  Someone at - it suggestions?

  xgdude, unfortunately this printer does not support true custom paper sizes, he acknowledged instead the paper types that are commonly used in the United States. This is because the non-traditional types of paper are difficult for the printer to recognize and inside the right margin of the printing error.

  I hope this information is useful!

• Canon 7 d "*" button does not reduce the magnification during playback

  My Canon 7 d "*" button will not "reduce the image / display thumbnails" while reviewing images (described on page 165 in the official Canon 7 d docs.)

  What the "*" button made during the review of the images is complete the review process and return the camera to normal operations.

  The "*" otherwise performs duties as announced during the filming of the photos and the camera works fine.

  1. Does anyone else have this problem?
  2. Is my camera broken?
  3. If Yes, can it be repaired?

  Thanks in advance for any help.

  PJoseph,

  Not going on the notes and advice, there are no known problems with the EOS 7 d that you describe.  It is unusual, and if you are still having trouble with this, I recommend that you have the camera assessed by our authorized Service Center.

  To start this process, you will need to fill out a service request on our Web site.

• paper detected does not match the paper size

  After clearing a paper jam when I go to print the 7310 all in one, beeps and has "paper detected does not match size of paper or type". When I hit OK the printed page is slightly bias. How can I fix it?

  First thing I want you to try is cleaning the rollers.  You said that the printed pages were asymmetrical.  Which can be the cause of the printer read the incorrect paper size and give this message.  The document below the link should help you clear up the problem of tilt.  Let me know what happens.

  http://support.HP.com/us-en/document/c00242765

• Oracle does not sort the records

  Hello everyone
  
  When I select two date columns and sort as two columns below
  

  select  date1,date2
  from table
  order by date1,date2

  Here the date1 is sorting correctly but should apply the date2 date1 sort right? but it does not work...
  
  my output is
  

  12-nov-2010         25-nov_2010
  12-nov_2010         15-nov-2010

  WHY this is happening... ?
  
  version of the client is oracle 8i
  version of the server is oracle 9i
  
  pls help
  
  S

  OK, so Oracle is perfectly order per your request: order by date1, date2.

  I suspect, however, that what you want is: order of trunc (date1), trunc (date2) or maybe just trunc (date1), date2.

• Inserted HTML does NOT have the content during resizing

  Hello

  We are building a website for a hotel and are required to register their channel Manager module in the site. To do this, you must follow these steps:

  1 paste the JavaScript code into the head section to load the module.

  2. place a small line of code with "insert HTML" in the site where the module should appear and that's all.

  The module is generated by a script the way Manager Server server-side and stuck in an iFrame is also generated by this same script. The thing is: it is resized at the height of the iFrame according to the content displayed in the iFrame. So we start by 301 px height when we call the page and search free rooms. The results are displayed on a 1400 px iFrame, which resizes properly when displaying results.

  THE PROBLEM: Footers stays put and the iFrame works behind her and out of the view port. There is also no scroll bar appears allowing me to scroll to the bottom of the iFrame.

  We got three layers:

  3 layer (containing and footer top navigation, both defined in a master page that is applied to the content page)

  2. content layer (containing the HTML inserted with the generated iFrame)

  1 background (well, it contains substantive items)

  WE NEED: The footer to be pushed by resizing never iFrame and get a scroll bar when necessary due to the height of the iFrame.

  What we're doing wrong?

  We just found the solution:

  If correct you the position of the html box inserted (in our case high in the Center), do not push any content. I don't know how the html-box has been checked in the first place, but the moment where I removed the position fix fromt the HTML, everything worked as expected. We will now try to return to the master page on the booking page, and everything will be good. Thank you for your comments, he did we check everything twice.

• Prints Firefox 29 blank web pages... or... print web pages in reduced format: does not match the paper size.

  I am currently using Firefox 29.

  I try to print a web page, for example, a game of words crossed from a journal (the link is below).

  http://www.freep.com/assets/freep/PDF/C422066148.PDF

  The puzzle is displayed full-screen, but when I try to print, I get a blank print: nothing is displayed

  In Firefox 27, printing would be reduced in size, although the print setting "Fit to page" has been selected.

  I don't have this problem when you use Internet Explorer.

  There is a bug in the PDF Viewer in Firefox 29. There should be an update in the near future to fix. For now, the best solution is to use a plugin instead of the built-in Viewer. Since you have the Adobe Acrobat plugin, it is a logical choice for you. This article explains how to make the transition: How to disable the built-in PDF Viewer and use another Viewer.

• Want to 4500. All-in-one: my printer indicates it does not support the paper photo paper 4 x 6

  My printer says it doesn't support of paper smaller than 4.9 / 12.6. I am trying to print a photo on photo paper glossy 4 x 6.

  I'm trying to print from IPhoto. Thanks for responding.

• Vista does not detect the kodak esp3 printer

  Vista Windows

  I can send to computer for kodak printer prints but the computer doesn't recognize the prnter during an attempt of analysis
  in the computer.

  Please respond to * address email is removed from the privacy *.

  Hi Jamesdenton,

  You get the error during printing?

  Were you able to print earlier?

  You did it all changes to the computer or the printer?

  Try the troubleshooter following the link below:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  You can also consult the Kodak Forum according to the link below:
  http://support.en.kodak.com/app/answers/list/p/5,62,432/selected/true#s=eyJzZiI6eyIxMDEyMjIiOnsiZmlsdGVycyI6eyJub190cnVuY2F0ZSI6MCwicGFnZSI6MSwic2VhcmNoVHlwZSI6eyJmaWx0ZXJzIjp7ImRhdGEiOjUsInJuU2VhcmNoVHlwZSI6InNlYXJjaFR5cGUifX0sImtleXdvcmQiOnsiZmlsdGVycyI6eyJkYXRhIjoiIiwicm5TZWFyY2hUeXBlIjoia2V5d29yZCJ9fSwicCI6eyJmaWx0ZXJzIjp7ImRhdGEiOnsiMCI6WyI1IiwiNjIiLCI0MzIiXSwicmVjb25zdHJ1Y3REYXRhIjpbeyJsZXZlbCI6MSwibGFiZWwiOiJQcmludGVycyIsImhpZXJMaXN0IjoiNSJ9LHsibGV2ZWwiOjIsImxhYmVsIjoiQWxsLWluLU9uZSBQcmludGVycyIsImhpZXJMaXN0IjoiNSw2MiJ9LHsibGV2ZWwiOjMsImxhYmVsIjoiRVNQIDMiLCJoaWVyTGlzdCI6IjUsNjIsNDMyIn1dfSwicm5TZWFyY2hUeXBlIjoibWVudWZpbHRlciJ9fSwiYyI6eyJmaWx0ZXJzIjp7ImRhdGEiOnsiMCI6WzkwOV0sInJlY29uc3RydWN0RGF0YSI6W3sibGV2ZWwiOjEsImxhYmVsIjoiRXJyb3IgQ29kZXMvTWVzc2FnZXMiLCJoaWVyTGlzdCI6IjkwOSJ9XX0sInJuU2VhcmNoVHlwZSI6Im1lbnVmaWx0ZXIifX19fX0sImMiOjJ9

  Reply back with more information for you to help

• Installation of 4500 HP Envy does not accept the IP on printer

  I was installing my new HP Envy 4500, and everything was a lot. The printer connected to my router Westell 7500 wireless and I can see it on the network with the IP 10.0.0.17. When the installation on my computer, I get to the point where he asks the IP address on the screen.  I can't clear the checkpoint.  He dislikes this IP address. (It seems like a simple IP address, is it not?) HP Envy is compatible with my Westell wireless router? This is 802.11 g, not n, but that doesn't seem like it should be a problem.

  I tried all available suggestions and tips:

  -I can connect via USB, but when I try to convert a wireless connection, I'm stuck again.

  -J' tried the program doctor of HP, and it tells me that the installation is not complete and gives me a new download, but that the download is blocked between 30 and 70 of 115, so I'm stuck here as well.

  [It's kind of weird that it is somewhat similar to the problem I had with my old Lexmark HP printer which prompted me to try a new printer. All of a sudden I had communication problems. As a first step, the document would be stuck at 15% while queue. After that I could see this printer on the network, but my computer could not communicate with her at all. This makes me think that I might have a problem with Windows 7? I tried to restart the spooler, but that didn't work either.]

  I am running Windows 7 64 bit on an Acer Aspire.

  Any ideas?

  Then it took me five days, but I finally my printer works perfectly, and I love it.

  After running many diagnostics on my computer, I came to the conclusion that I had a problem of windows 7.  I restored to factory settings (because windows even backup was stunning on me). After that installation is progressing beautifully and I got the printer set up in a few minutes.

  Was it a virus? Windows flip out because I had already run a Lexmark printer? What happened a month that made me lose communication with my old printer. I'll never know.

  But, I have solved my problem, so I'm happy.

• HP Officejet 7110e: HP 7110 does not obey the "Black only" Print option. : - result person wouldn't want to buy HP PRINTER.

  HP must discover new such as printer driver software to solve the only black option (6600/6700/7110) means black alone will consume, otherwise no one will buy HP printer. I already suffer from level of ink color cartridge 'only Black' option... feel good too dissapointe. HP hopes will solve as soon as possible to maintain their high position in printer marketing even when... Thank you.

  HPARUN wrote:

  I understand the technical problem on the print head to clog the question, but why not run like 1180c or hp hp 1000 as printer that handles both inks or ink only (black)?

  Deskjet printers 1180c or 1000 have printers IPH - the print head is built into the cartridges.  If the print head is clogged, the replacement of the cartridge will also replace the print head.

  The Officejet 7110 printer has IIC, individual with piping ink cartridges and print heads separated to connect.  The printer running with one or more colors of voids can cause the air in the plumbing and/or damage to the print heads.

• my computer (acer aspire) Windows 7 does not have the Dell 924 printer driver

  I tried a multitude of ways to download the driver on the Dell website, but nothing helped.  I am at a loss now what to do next.

  Dell provides only up to Vista 32 bit software/drivers for this model, your Acer uses win7 64-bit?

• SYSDBA operations does not contain the connection during the audit id information

  Server: AIX

  database: 11.2.0.3.0

  audit_sys_operations is set to true. It's follow the operations performed by users of sys.

  
  

  do you have a test like case below and was not able to find the username of the BONE

  Connect to the server with my ID (example thinkdba)

  sudo su - oracle.

  
  

  now connected to the database as "/ as sysdba" and performed some operations

  and perform

  Drop user test cascade;

  
  But aud files was not my credentials no matter where (as I do not found my login id in the aud files.)

  
  

  LENGTH: "176"

  "ACTION: ['22] drop user test cascade.

  USER DATABASE: [1] ' / '.

  PRIVILEGE: "SYSDBA" [6]

  CLIENT USER: [6] "oracle"

  How can I capture my login id if I connect as sysdba?

  Concerning

  Thinkdba

  Think_dba wrote:

  In my environment, we have many dba work by typing sudo su - oracle after they connected with their login id

  Example:

  If I can connect with my id say thinkdba

  and then I do sudo su - oracle

  I want results as below:

  «"CLIENT USER: [6] thinkdba»»

  I want to win the lottery.

  You can't always get what you want.

  the database knows only that reports OS & OS 'oracle' user has registered in the DB.

• iPhone app does not display the icon during installation

  Hello

  We have developed an iPhone application using flash builder. We used the following icons of the resolution.

  <>icon

  < image29x29 > assets/images/x_29px.png < / image29x29 >

  < image57x57 > assets/images/x_57px.png < / image57x57 >

  < image72x72 > assets/images/x_72px.png < / image72x72 >

  < image114x114 > assets/images/x_114px.png < / image114x114 >

  < image128x128 > assets/images/x_128px.png < / image128x128 >

  < image512x512 > assets/images/x_512x512.png < / image512x512 >

  < / icon >

  The icon appears correctly in iTunes and also icon in the device after installation. but the problem is during the installation of the application in the device, it is show Virgin icon.

  The app is only specific to iPhone devices. for example,.

  < iPhone >

  < InfoAdditions >

  <! [CDATA]

  < key > UIDeviceFamily < / key >

  < table >

  < string > 1 < / string >

  < / array >

  []] >

  < / InfoAdditions >

  < requestedDisplayResolution > top < / requestedDisplayResolution >

  < / iPhone >

  Please help me how to display the icon during the installation of the specific application of the iPhone.

  Hello

  The icon is not displayed during the installation of the application of the ad hoc package. Now, we have published (same code game) app in the Apple iStore and no problem icon with the distributed version (the application that's iStore).

  Thank you

  Chandrashekarreddy Muthumula