HP m7640n pc: hp m7640n pc

Similar Questions

• Card cheap HDMI to m7640n?

  I would like to connect my stock * m7640n to a 720 p 32 "screen that has both HDMI and VGA inputs with the best possible video quality.

  I'm not a gamer and won't be watching DVDs on the PC.   This is mainly for watching videos online, as well as the General navigation of the sofa.    If anyone can point me to a set - top box that will do: browser, YouTube, Amazon, Hulu, Netflix, iTunes, Vimeo and Vodpod I'm all ears!

  I would be better:

  (A) install an HDMI card in the PC (and if so, recommendations for a cheap card that is known to work)?

  B to obtain an external VGA-HDMI converter box?

  (C) just stick with VGA to VGA-in output?

  Any comments will be appreciated.

  * the PC specifications:

  -Athlon 64 X 2 @ 2.6 GHz

  -XP Media Center Edition

  -2 GB OF RAM

  -Locations: PCI (1) and (1) PCI Express x 16

  -audio outputs: 7.1 line level and SPDIF

  Hello:

  Why not upgrade to Windows 7?

  If you get this video card, your PC will certainly run windows 7 even better that he would go to Vista.

  Your PC comes stock with 2 GB of memory. Max going out with another 2 x 1 GB chips. They are pretty cheap.

  Get two of them:

  http://www.Newegg.com/product/product.aspx?item=N82E16820148166

  They will be downclock at the speed that your PC can run at, which is at 533 MHz. But you may as well buy the faster speed memory that you can get where you want to move them to another PC one day that can run at the speed of 800 MHz. I do not think that the PC2-4200 chips are either less expensive. They may even be more expensive.

  You can watch on the NewEgg site if you want to check for Crucial memory in slower speed rating. But I bet I'm right.

  Finally, run the Windows 7 Upgrade Advisor and turn all of your devices. This tool will scan your PC and report problems of compatibility with windows 7.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  According to specifications, your PC can run the 32-bit or 64-bit version of windows 7. I would not install 64-bit unless you max out the memory.  64-bit systems are in need of more memory to run than do the 32-bit systems. Not double, but more.

  Shop around for the best price on a box that upgrade to windows 7. You can transfer it to another PC who is eligible for an upgrade.

  You must do a custom (clean install) when you upgrade from XP to windows 7. This means that you must back up all your files and reinstall programs and files you want on the PC after installing windows 7.

  http://www.Newegg.com/product/product.aspx?item=N82E16832116713

  Paul

• M7640n acpi driver missing Media Center

  Hi, I'm helping a friend with his media center m7640n.  I had to wipe his record clean b/c of the viral infection.  I did not have the chance to create the recovery CD I got all drivers installed ok except that now I have an unknown device in device saying Device Manager unknown on Microsoft ACPI bus.  Can someone enlighten me on this?  TX

  Hello:

  I ain't giving up that easy...

  Try this one. You will need to load from the device in the Device Manager as is the pilot of the cru.

  Unzip and save these 2 files in a folder where remember you where it is.

  Click the ACPI device in Device Manager. Click on update driver driver. Select the method of manual search and navigate to this folder. Select the AMDAway.inf file to load.

  Paul

• Pavilion M7640N + 2 TB HDD

  Hello

  I have a HP Pavilion M7640n (running Win7 32 bit) and a 2 TB Seagate drive in a motor housing (Mediasonic USB) I want to use with the PC as a HARD drive external for backup purposes. My problem is that the drive is not displayed when connected. The PC knows there is something out there and the device appears in the list of USB devices but the drive itself does not show up anywhere.

  Am I missing a jumper switch or a BIOS update? I have a 500 GB HARD drive in a disk enclosure in double (same as before Mediasonic), with whom I have had no problem.

  Thank you for your help and best regards.

  B.

  OK, lets check in disk management.  Your boot drive will display a Disk0.  Stay out of the way than.

  The added disk should appear as Disk1.

  Start, Control Panel, administrative tools, then:

  • Click here to open the computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  • In the left pane, under storage, click Disk Management.

  • Click on a region not allocated on your "new" hard disk and then click New Simple Volume.

  • In the new Volume Simple Wizard, click Next.

  • Type the size of the volume you want to create in megabytes (MB) or accept the maximum size by default, and then click Next.

  • Accept the default drive letter or choose a different drive letter to identify the partition, and then click Next.

  • In the Formater Partition dialog box, do one of the following:

    • If you don't want to format the volume right now, click on do not format this volume and then click Next.

    • To format the volume with the default settings, click Next.

  • Review your choices and then click Finish.

• I have a hp media center tv m7640n and I had to get a copy of the media library but theres a question

  There a? in yellow and I installed all the drivers when I look it says something to do with location on system compatible ACPI Microsoft I have no idea of what's probably missing a driver I installed all windows updates and does not change

  Hello:

  It was what I expected... A very strange balloon pilot who is hard to find.

  I enclose below.

  Unzip it into a folder. Create a folder and unzip it to him and keep the folder where you can easily remember where browse to it.

  You must manually install this driver.

  Click on the? device. Click on update driver driver. Select manual search (specific location), and then navigate to the folder.

  The driver should install.

  Paul

• Media Center PC m7640n - error Guide 20

  I can't get the guide in my media center. I am connected to the internet (still on the connection) and I have not had a problem until this week. Nothing new has been installed recently. I ran a system restore and some repair download driver. I keep trying to get the latest guide by running the media set up, however this does not resolve the issue. I have Time Warner Cable.

  Can someone help me?

  Thank you

  You can even type in the run window to open the folder. Otherwise, it's the exact path:

  C:\ProgramData\Application Data\Microsoft\Crypto\RSA\MachineKeys

• How can I get help and support to run media Center Pavillion m7640n TV XP victory.

  I get a message saying windows cannot open help and support because a system service is not running to correct this problem start the service named in Help and support. I can't find it in services.msc is there another way to activate this service.

  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  Click Start, run and type Services.msc

  Double click Help and support

  Set the startup type to automatic

  Start the Service

  If the help and support service is missing from the Services.msc list, it is perhaps because of the accidental deletion of a registry key. Download the file helpsvc.zip and unzip the content. Retrieved from helpsvc.reg on the desktop and double-click on it to merge the contents to the registry. This restores the entrance of the help and Support service.

• What happened to my Admin rights on files and folders?

  Hi, I have a HP Media Center PC with Windows XP m7640n.  I am trying to install a new printer: printer all-in-one Kodak ESP7.  However, it tries to install over the old EasyShare software that was not completely removed.  My problem is that there are three files always under the Kodak directory that I did not have the power to delete.  I get access denied error when I try to delete them.  My profile is configured as an administrator, will not let me delete; signed the HP-administrator-won't let me delete.  Then I thought that my daught has installed the original software on the system and it had rights to the files.  No luck with that or any of the other profiles on the system.  I don't even see the Security tab in the properties of the file!  I really need to get rid of these files, so I can continue to install this printer!  I was on the phone yesterday with Kodak for @3 hours and even they could not help.

  The problem lies with my permissions on the system and I don't know what to do!  Can someone please!  I am very frustrated!

  Thank you!!

  Ceil

  Try MoveOnBoot_a very handy little utility I've used for several years. Once installed it gives you right click on the files menu... the value delete, rename or move on the next reboot of the system.

  http://www.SnapFiles.com/get/emcomob.html

• HP updates agent is still running

  I have a HP Media Center PC m7640n

  I am running Windows XP

  In my task manager, 'HP updates Agent' is always on.  He never stops.  This happened a few months now.  I googled and it goes to a few other people.  A suggestion they give is to disable updates from HP, but I'm not sure I want to do this.  I would rather fix the problem correctly.  Help please.

  The correct way on a machine of this age (where probably no updates from HP will come) is probably to turn it off. Start | All programs | Start, select 'HP updates' (or something like that) and right-click to delete

• System fan was able to start! Service system to avoid damage. Press [F2] to continue

  Ive read all the forums and eliminated the possibilities. This isn't a power supply fault, it's a whole new fan and I think I know the cause, but do not know how to fix it. I took the hard drive, motherboard and processor of my Media Center m7640n, added a new PSU and video card and put it in a new case from Cooler Master Storm Sniper Black edition games. I didn't get the error before the swap but had during the first boot after the Exchange. Ruling on a faulty PSU and knowing that the fan is brand new I am asssuming that I get this error because the new case fan is bigger and there by taking more time in the limelight. Problem is that the BIOS does not give me an option fan and theASUSteK motherboard is the property of HP and ASUSteK nor HP provide BIOS support. Any ideas? Please help because I do not want to spend the money to replace the motherboard, CPU etc...

  On my Pavilion is under the supervision of the material (I think, would have to reboot to check). There is a place to turn off fan analysis. Only if you are sure that your fan is working.