HP Mini 110-3101TU: HP Mini 110-3101TU is not compatible with Windows 10?
I've been running my HP Mini laptop in Windows 7, IE11 with an external (extended desktop) Samsung SyncMaster LS23A300BS/XP with no problems of navigation. All drivers up to date. I received a free upgrade for Windows 10 I installed online 2 weeks ago and have not been able to make a good navigation on the internet yet, either on board or IE11: both crash in browsers after a 2nd or 3rd browser, blocking and the opening page process may not be finished in Manager tasks so that Windows can not stop (you need to disconnect). I followed all the advice, corrections and common sense (clean boot) pertaining to this crash, but nothing works. On top of this crash, there is a problem with the application of Windows Explorer which can not read a statement in memory at shutdown of Windows 10 and must be closed in the first place. The last problem occurs only (I think) when working with the external montor, when I work with the laptop only I've not seen this message (can not read the instructions...) when stopped down, but blocks the navigation happens tirelessly with one or two monitors.
I played with the DNS (using automatic 8.8.8.8 etc. and DNS), I also run a PowerShell (tip forum) command and disabled non-Windows file extensions and all supplements but did not touch the registry other than adding two words for maximum 10 tabs/server. Nothing helps.
Question: My Mini laptop too old and incompatible (surfing the internet) with Windows 10 or maybe Windows 10 faulty (buggy)?
I am writing this post with my old Compac HP 8710p with the same monitor external but digital (DVI/HDMI cable) in VistaSP2 32bits Business that works like a 'charm' (pun intended). I could not even connect you to this forum with Windows (crash) 10.
Any suggestions and help would be appreciated
Track 5 September 19:00 (GMT + 8 hrs.)
Not crashing with browsers (Edge and IE11) but still very slow and often-page response cannot be found and freeze, then after updating but I am now able to close the frozen pages (no more crashing, process in normal Task Manager). The message Windows Explorer app that it cannot read a statement in memory occurs that when my external browser is connected (2 active monitors) and does not show using my laptop just so it's probably Intel graphics driver related. I didn't know I was downloading Defender 5 updates yesterday that there is nowhere a notification in Windows, 10 with a slow (home, 2 G WIFI) internet connection may have caused some of my problems, but Microsoft has promised to look into the crash problems I brought today and I'll post the results shortly. I type this follow-up with my HP Mini and IE11, Windows 10...
Frank
To follow this thread on the Microsoft Forum please see:
Frank
Updated: 9 September
I found three issues that I fixed and most of the problems have disappeared now, internet Windows response is still slow compared to VistaSP2 and IE9 but which can improve with W10 updated.
The last driver Synaptics touchpad from Synaptics and Windows 10 fix1 support web page: load automatically downloaded an update.
Correction 2: Downloaded Intel driver 3150 8.14.10.2230 (2010) of the web page of the HP support and ran Windows 10 compatibility check, saved results to setup.exe and then install the (older) driver on my graphics driver (2015) Intel 3150 more recent that I have downloaded from the Intel support web page but is not compatible with the HP Mini 110 series. This caused the accidents of Edge and IE11 (zoom).
Fix 3: run 2 commands (admin) NETSH: netsh winsock reset and netsh int ip reset c:\resetlog.txt which improves the response of browsers, but after restarting the need for procedures to be repeated, if all goes well in a future update of the W10, will address this issue.
I think that my HP Mini is now compatible Windows 10
Frank
Tags: Notebooks
Similar Questions
-
WRT-110 34 Firmware Build; Compatible with Windows 7?
Is the Firmware of 34 build for the WRT-110 compatible with Windows 7 Professional? W7 installed to replace Vista Home Premium on a laptop Dell Inspiron 600 m and have now no wireless networks available and laptop does not detect the WRT-110. Not a problem on my Dell Vostro 1550 as it is still under XP SP3.
There is no real support from Linksys for this topic re: W7 to their support site, and I'm probably going to NetGear if there is no solution.
Thus, its seems that the problem has been resolved on the upgrade the drivers for wireless network cards.
-
computer HP mini 200 is not compatible with windows 10
I have a hp mini 200-4212sf I would like to have the window 10 and Intel (r) graphics media accelerator 3600 series is not compatible. Can we put windows 10? And if not to add to the computer are running?
Visit hp Support to check if there are any updated drivers
Then after having updated compatibility check again
-
How can I restore my new iPad mini from iCloud backup if they are not compatible with iOS9?
My Mini iPad had an internal problem, so I got a new one on the Apple store.
The problem is I'm trying to save my other from iCloud, and I get a message saying
my back ups that are not compatible with iOS9? What should I do? I don't want to set it up as a new iPad.
I want to save all my info. Help, please!
What iOS has been used to create the backup initially? Is it possible that the backup was performed with iOS 9.x and replacement has only iOS 9.0? Check what iOS is on the replacement iPad. If this is not the last and the original device was later, then you will need to put in place the iPad like new, update of iOS, then go into settings > General > reset > erase all content and settings. Then you can restore the backup to iCloud.
-
I can't connect my Sony Mini DV DCR-TRV18E camcorder to my computer laptop 64 bit Windows 7. The camera is not compatible with this version of Windows. Does this mean that I can't import my old videos? Thank you.
Yes, this says it's not compatible. So I don't think it'll work in Win7. There a firewire connection? If this is the case you can use it if the laptop has firewire top. All you need is a cable
-
Maxtor One Touch 4 Mini external hard drive not partitioned by Windows 7 PC
I have a Maxtor One Touch 4 Mini external hard drive that has been formatted to originally a Windows XP computer. I have a new computer that uses the Windows 7 operating system. The drive hard Maxtor are not accessible by the new computer. Although the new computer reconizes the device by its name, the Maxtor Manager window displays the score as 'unknown '. Maxtor/Seagate technical support said that I need to move the files from the old external hard drive Maxtor on a new Seagate, external drive, using a Windows XP computer. Is there another easier way?
Hello
The Windows 7 Compatibility Center shows that the Maxtor OneTouch 4 Mini is compatible with Windows 7.However, given that it is a product of the 3 part, you go by what the Seagate support said.
You can send this link on the OneTouch 4:
http://www.Seagate.com/support/external-hard-drives/desktop-hard-drives/OneTouch-4/Important note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. -
Not compatible with HP Mini C4200 series software
I want to print from my HP Mini through my C4280 but the software for the C4200 series requires a screen resolution that the Mini is unable to provide. The printer requires a minimum of 800 x 600 but you can not change the resolution of the Mini. What gives?
-
HP 110-4250nr does not start in windows 7
Hello WinWin88,
Welcome to the HP Forums!
Of what you are troubleshooting-performed and information you have provided. It is likely that the motherboard has failed on your Mini. I have included Service and maintenance Guide for your laptop. If you go to page 55, it lists the numbers of spare parts and of the instructions on how to replace the motherboard.
You can always check the HP PartSurfer to see the availability of spare parts and you place your order.
Kind regards.
-
I can't open Thunderbird. Above message is displayed on the screen.
I suggest you download a new copy of getthunderbird.com and reinstall. I don't know what caused it, but a resettlement must refresh files and fix.
-
I used MF for years and did nothing to the application directly to stop opening. Have I messed up by deleting something on my PC, please?
If you use ZoneAlarm Extreme Security then disable virtualization and reinstall Firefox.
See:
-
version 1.9.2.20 is not compatible with min version > = 1.9.2.23 max version < = 1.9.2.23
Running windows 7. Obviously Firefox updated automatically (sp). How can I cancel the update and stop the future "updates?
Bill
You can manage the automatic updates in Tools > options > advanced > update. The cited version numbers imply there is an add-on which has compatibility problems, you can disable the Add-ons check and leave the rest as is.
If you hit on the problems with the add-on, then take a look at the Tools > Add on pages. It might well be a better replacement for the add-on that you used so far.
Concerning
SMO
PS: If the answer solves your problem, then mark this as "resolved". This way you help others in a similar situation.
-
I tried to uninstall 7.0.1 and reinstall only and still it would not to date and problems such as the loss of my favorites and have different toolbars and Add ons whenever I opened it. I lost so many bookmarks and it became so frustrating that I decided to try to upgrade to see if that could overcome the problems. And now I have this problem. When I did a search on my hard drive to see the components of firefox how was I found firefox files and documents in all directions and I was wondering if I should just delete everything related to firefox to clean all residual files which could be causing problems and then start a clean download , but I didn't want to delete files in windows and didn't know what I should delete and I have to leave. Can anyone help? I miss my firefox and the wish that I had never upgraded to 7.0.1.
If you use ZoneAlarm Extreme Security then try turning off virtualization.
See also:
-
Pulling hair because there is also a request to check if another copy of Firefox can be installed and have so uninstalled and deleted any reference to Mozilla and Firefox several times, and as a result have lost all bookmarks, cookies etc. Having to accept the latter, but still cannot load the latest version. The downloaded exe file will be just not successfully. Any advice would be welcome. [email protected]
If you use ZoneAlarm Extreme Security then try turning off virtualization.
-
Windows 2000 Pro SP4. Been running FireFox for several years. Ver3.6.6 since 22/03/2011. Had an msg window in FireFox showing important security provision. (INFO ADDED: checked and then updated system requirements...) As usual, I clicked Yes to load it. A few moments later, I received the message: "error in XULRunner:
Version of the platform "1.9.2.18' is not compatible with"
minVersion > = 1.9.2.20
"maxVersion < = 1.9.2.20.
That's right, no. MORE FIREFOX! How can I fix it and not lose one of my 'stuff '?The updater has not been able to update all the files and some were left as older versions.
Do a clean reinstall.Download a new copy of Firefox and save the file to the desktop.
- Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
- Uninstall your current version of Firefox.
- Do not remove the data of a personal nature when you uninstall the current version.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
Want to 110 e - All-IN-ONE-PRINTER D411 is not compatible with Mac OS x 10.8
Buy this printer very well today. It was to work with my MacBookPro (which has OSX 10.8.2).
However it is not. The operating system is too recent. The CD does not install the printer program. And the www.hp.com/support has no updated program.
Do I have to return this printer?
Hello
The drivers are available on hp.com.
Download and install the software below, don't forget to check the Software of HP's recommended during installation.
Shlomi
Maybe you are looking for
-
Satellite Pro P300-19 q WLan don't work in Win XP & keyboard problem
I just took delivery of one P300 19 q which seems fine other than... 1. the Wireless does not work 2. the keyboard in my opinion is c * p I removed Vista, I use the laptop for XP and music is much better (not sure if this is related) but I can't get
-
I recently installed Driver Detective hangs up.
I recently installed Driver Detective. I did a scan and the scan hangs when it tries to update my printer HP 2100 driver. I don't have this printer. How can I get rid of this driver for my Driver Detective will no longer hang up?
-
When I burn my blank cd in windows media player, that he was just came. Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or dele
-
Hello I have a hp elite 7300 which has worked very well and with zero problems. today I restarted, and now I can't before the splash screen blue hp ("press ESC for boot options") at the beginning of the startup procedure. I have everything unplugged,
-
Write a bitmap to a file *.bmp or *.png with JDE 4.5
Does anyone know a function to write a bitmap to a file standard riphics for example *. BMP *. PNG or something like that? I'm Trying with JDE 4.5 on the default curve Simulator.